suptek MT4204 User manual

Brand
suptek
Model
MT4204
Category
Flat panel wall mounts
Type
User manual
MT4204
Read the instructions before you begin.
·If you are unsure of any parts of the process, contact a professional
contractor or installer for assistance. Improper installation can result
in injury or damage.
·Check package contents against the Supplied Part List in the instruction
to assure that all components are received undamaged.
·Do not use damaged or defective parts.
·Do not use this product for any purpose or in any configuration not
explicitly specified in this instruction.
Check the screws every two months.
ATTENION
Screw package
Parts
Specifications Fits TVs from 26”-55”
We hope you never have the need,but if you do,
our service is friendly and hassle-free.
:716-777-3938
:after-sales@suptekmount.com
(4)Self-drilling screw-A
(4)Plastic anchors-B
(4)M4*20 -C
(4)M6*25 -E (4)M8*25 -F
(4)Φ8*14*6
Higher spacer -G
(4)Φ8*14*11
Higher spacer -F
(4)Φ5 Washer -I (4)Φ6 Washer -J
Hook X2
Preparation:
Check VESA pattern of TV before installation
Plate X2
(1)Bubble level -K
(4)M5*25 -D
Installation in concrete wall
Connect hooks and TV and plate parts
Installation in wooden wall
Mark the hole site and use bubble
level to adjust the bracket’s horizontal position.
1. Connect hooks and TV
3. Tighten the pre-positioned screws in the hook
4. Angle adjustment of TV
Tilt 15° Down
2. Hang the TV to the bracket
You may need
assistance to
hang it.
Mark the hole site and use bubble
level to adjust the bracket’s horizontal position.
  • Page 1 1
  • Page 2 2

suptek MT4204 User manual

Brand
suptek
Model
MT4204
Category
Flat panel wall mounts
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents