Howdens MOD0601 Installation guide

06/11/12

Oak Veneered Skirting, Architrave and Linings

Please note; for all Oak Veneered Skirting, Architrave and Linings, please make the following

recommendations for the finishing, storage and fitting of these products.

Finishing

 You can use water based or solvent primers, stains, paints or varnishes (we recommend a light

sanding before applying a varnish) to finish this skirting, architrave and linings. If using a

solvent based finish we recommend the use of a VOC 2010 compliant product.

 Our veneered products are NOT suitable for waxes, polishes, dyes or oils (e.g. Danish Oil) as

they do not properly seal the item and can lead to delamination of the veneer.

Storage

 Profiles should be stored in a dry area with any exposure to damp conditions avoided.

Fitting

 Profiles should not be installed in freshly plastered rooms.

Finishing Storage and Fitting Instructions

This manual is also suitable for

Download PDF