V-ZUG 003 Installation guide

Category
Cookers
Type
Installation guide

V-ZUG 003 induction glass ceramic hob offers precise cooking control and energy efficiency for your kitchen. With its frameless design and beveled edges, it adds a modern touch to your countertop. The hob features multiple cooking zones that allow you to cook different dishes simultaneously. It also includes safety features such as residual heat indicators and automatic switch-off to ensure safe cooking. Enjoy a seamless and efficient cooking experience with the V-ZUG 003 induction hob.

V-ZUG 003 induction glass ceramic hob offers precise cooking control and energy efficiency for your kitchen. With its frameless design and beveled edges, it adds a modern touch to your countertop. The hob features multiple cooking zones that allow you to cook different dishes simultaneously. It also includes safety features such as residual heat indicators and automatic switch-off to ensure safe cooking. Enjoy a seamless and efficient cooking experience with the V-ZUG 003 induction hob.

Installation instructions
Induction glass ceramic hob
Frameless, with facets
J003.133-2
28.10.09 BEBA
1
These installation instructions apply to the model: 003 (GK46TIPS)
Identification plate
The identification plate is next to the connection plate.
A Affix the second identification plate (enclosed) in an accessible position behind
the front of the fitted cabinet beneath the appliance.
A Information on the necessary mains voltage, type of current and fuse protection can be taken from the identification plate.
A The appliance is equipped with a mains cable that should be connected to a distribution box by the customer.
Error message U400
The appliance should be installed by qualified personnel only. Each step must be carried out and checked in full in the order
specified.
Validity
General notes
If fitting in flammable material, the guidelines and standards for low voltage installations and for the fire protection must be
strictly observed.
Accessories
Designation Art. no.
Ventilation protective plate set
For niche width 800–900 mm H6.2123
Electrical connections
Electrical connections must be carried out by trained electricians in accordance with the guidelines and standards for low
voltage installations and the specifications of the local electricity supply companies.
A plug-in appliance may only be connected to a socket outlet with earthing contact, installed according to specifications. An
all-pole mains isolating device with 3 mm contact opening should be provided in the house wiring system. Switches, plug and
socket devices, circuit breakers and fusible cut-outs which are accessible after installation and which have all-poles switching
are permissible as isolating devices. Effective earthing and separately installed neutral and earth conductors ensure safe and
fault-free operation. After installation, live parts and cables with basic insulation must not be accessible. Old installations should
always be checked.
Incorrect connection:
A pole conductor was connected to the connecting terminal for neutral conductors.
Quickly disconnect the appliance from the mains!
Connection plate
Identification plate
900
600/550
Installation pipe
Distribution box
Clamp
400 V 2N~
230 V~
AUS / NZ
PE/ green/yellow
N blue + grey
L1 brown
L2 black
PE/ green/yellow
N blue + grey
L1 brown + blac
k
Installation instructions
Induction glass ceramic hob
Frameless, with facets
J003.133-2
28.10.09 BEBA
2
Indications
The work surface has to be flat to ensure that the appliance is adequately sealed against liquids.
In order to guarantee good ventilation, there needs to be a space of at least 2 cm height beneath the appliance.
A cabinet unit with a width of at least 900 mm is recommended for the base unit.
Installing
The layout of the cooking zones on the integrated hob may differ from the illustrated hob!
1. Cut out mounting cut-out precisely.
2. Carefully place the appliance in the mounting cut-out and press against the work surface with sufficient overlap.
Installation
Y
Y
Y – Y
Cable length 1,7 m
49.8
from
support
Aim for a
max. of R10
The underside of the material between cut-outs front and rear is reinforced. The width
of material between cut-outs is determined by the producer of the stone worktop. The
minimum material width can vary according to the property of the stone.
Drawer / Cabinet
Mounting cut-outs in side walls
left/right for a niche width of
900 mm, necessary for the
ventilation of the appliance.
410
910
min. 25
123
886 ±1
200
min. 70
386 ±1
min. 70
900
min. 15
min. 20
Installation instructions
Induction glass ceramic hob
Frameless, with facets
J003.133-2
28.10.09 BEBA
3
Cool air supply if installed over a drawer or cabinet
In order to guarantee good ventilation, there needs to be a space of at least 2 cm height beneath the appliance.
A Necessary space below the work surface for the appliance, only for niche width 600/550 mm.
B Necessary space below the work surface for the ventilation of the appliance.
C Necessary ventilation cross-section in side walls left/right. Devices and cabinet components in the neighbour niches may not cover
this ventilation cross-section.
With a protective plate beneath the ventilator
A guard plate is recommended in the vicinity of the mains cable and to protect the ventilator openings (see «Accessories»).
min. 25
C
min. 15
103
A
min. 240
(43)
123
C
min. 200
(20)
263 B
min. 360
(263)
900
600/550
3
Centre
of fans
Drawer
Ventilation
intake
min. 15
for ventilation
Ventilation
intake
Ventilation
discharge
B
min. 67.4
B
min. 67.4
A
min. 51.3
3
~10
==
Warning:
Do not place mains cable in the
area of the protective plate
Centre
of fans Protective plateDrawer
15
Middle of angle
49.8
(17.6)
min. 67.4
  • Page 1 1
  • Page 2 2
  • Page 3 3

V-ZUG 003 Installation guide

Category
Cookers
Type
Installation guide

V-ZUG 003 induction glass ceramic hob offers precise cooking control and energy efficiency for your kitchen. With its frameless design and beveled edges, it adds a modern touch to your countertop. The hob features multiple cooking zones that allow you to cook different dishes simultaneously. It also includes safety features such as residual heat indicators and automatic switch-off to ensure safe cooking. Enjoy a seamless and efficient cooking experience with the V-ZUG 003 induction hob.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI