Danfoss EVR 2 - 22, Normally Closed/ Normally Open (NC/NO) Installation guide

Type
Installation guide
032R9545
EVR (NC flare)
DKRCC.PI.BB0.A8.02-520H4350
032R9545
© Danfoss A/S (AC-SMC / MWA) 10-2011
EVR (NC flange)EVR (NC solder)
Note: Tube
construction
Instruction
EVR 2 - 22, Normally Closed/Normally Open (NC/NO)
Refrigerants CFC, HCFC, HFC
Be sure that the O-ring is
in place
Warning
Never switch on power to
the coil when the coil is
dismounted from the valve.
Otherwise the coil may be
damaged and there is risk
of injuries and burns.
!
Warning
Never switch on power
to the coil when the coil
is dismounted from the
valve. Otherwise the coil
may be damaged and
there is risk of injuries and
burns
EVR (NO solder)
EVR Nm kpm ft-lbs Torx size
2, 3 1.4 0.15 1 T 15
4, 6, 8 2.5 0.25 1.8 T15
EVR Nm kpm ft-lbs Torx size
10, 15, 18 2.8 0.3 2 T 25
20, 22 12 1.2 9 T 40
EVR 2, 3 (NC)
EVR 4 - 8 (NC)
EVR 10 - 22 (NC) EVR 10 - 20 (NO)
EVR 4 - 8 (NO)
Sticker applies
only to UL products
© Danfoss A/S (AC-SMC / MWA) 10-2011
DKRCC.PI.BB0.A8.02-520H4350
EVR 4 - 22 (NC)
EVR 2- 3 (NC)
EVR 15 - 22 (NC)
EVR 4 - 10 (NC)
EVR 4 - 8
Sticker applies
only to UL products
Sticker applies
only to UL products
EVR 4 - 8 Dismounting gasket :
Pres and twist
  • Page 1 1
  • Page 2 2

Danfoss EVR 2 - 22, Normally Closed/ Normally Open (NC/NO) Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI