Phase One iQ Series User guide

Type
User guide

This manual is also suitable for

User Guide Phase One 645DF Camera and IQ-series Digital Back
User Guide: Phase One 645DF Camera and IQ Series Digital Back
2
On Rights
©2011 Phase One A/S. All rights reserved. Made in Denmark.
Version 1.5
Colorspace images created in CROMiX ColorThink.
Photos by:
Jens Honoré
Stefan Kapfer
Eugeni Pons
Text By :
The dedicated Phase One sta.
On Liability
The information in this User Guide is provided as is.
Under no circumstances, including negligence, shall Phase One be liable for any incidental, special, direct,
indirect or consequential damages arising out of or relating to use of the information provided in this guide with
or without the software and/or hardware described in the guide.
Trademarks and Acknowledgements
Capture One and Phase One are either registered trademarks or trademarks of Phase One A/S in the European
Union and/or other countries.
All other trademarks are the property of their respective owners.
This product includes DNG technology under license by Adobe Systems Incorporated.
3
4
Contents
1.0 Introduction 8
1.1 Warranty 9
1.2 Installation and Activation of Software 9
1.3 Activation and Deactivation of Capture One 10
1.4 Screen Calibration 11
2.0 The 645DF Camera and IQ Digital Back System 12
2.1 Unpacking the 645DF and IQ Digital Back System 12
2.2 Value Added 13
2.3 Classic vs. Value Added 14
2.4 Charging the Batteries for the IQ Digital Back 15
2.5 Batteries for Camera 16
2.6 Sleep Mode 17
2.7 Attach and Remove Lens 18
2.8 Adjusting the Strap 17
2.9 Attaching the IQ Back 20
2.10 Parts of the Camera System (Nomenclature) 21
2.11 The Displays 22
2.12 Display Abbreviations 23
2.13 The Buttons on the Back 24
2.14 LED Lights 24
2.15 Setting Date and Time 25
2.16 Setting Diopter 25
Replacing the Diopter Correction Lens 26
2.17 Eyepiece Shutter 26
3.0 Basic Functions 28
3.1 Setting ISO 28
3.2 Setting White Balance 28
3.3 Getting started: Setting the Shutter Release, Focus, Exposure
and Metering modes 29
3.4 Measuring Light – Exposure Metering 31
3.5 Focus Mode 32
3.6 Focus Areas 34
3.7 Using Focus Lock and Infrared Focusing 36
3.8 Drive Dial 38
3.9 Exposure Modes 39
3.10 Flash Photography 43
3.11 Flash Compensation Settings 46
4.0 Introduction to the IQ Series Digital Back 49
4.1 Quick Start (shooting untethered) 50
4.2 General Hardware Setup 51
4.3 Indicator Lights 52
4.4 Indicators 52
4.5 Tethered and Untethered Operations 53
4.6 CF Card Usage 55
4.7 Secure Storage System (3S) 56
4.8 Formatting your Memory Card 57
5.0 Navigating the IQ User Interface and Menu System 58
5.1 Menu Buttons 59
5.2 Shortcuts 59
5.3 Touch Screen Operation 60
5.4 ISO 61
5.5 White Balance 62
5.6 Custom White Balance 63
6.0 Play Mode 64
6.1 Play Mode Views 65
6.2 Play Mode: Context Menu 66
6.3 Info Bar 67
6.4 Play Mode Navigation 67
6.5 Zoom 67
6.6 Delete and Rating 68
6.7 Delete in Thumbnail View 69
6.8 Grid 70
6.9 Tools 72
7.0 Menu 73
7.1 645 DF (Camera Custom Functionality from 7.1 to 7.1.28 ) 76
7.1.1 Setup C1, C2 or C3 76
5
7.1.2 Exposure Program 76
7.1.3 AF Area 76
7.1.4 Light Metering 76
7.1.5 Custom Function Set 77
7.1.6 Setup Custom A, B or C 77
7.1.7 EV Step 77
7.1.8 Lens Change 77
7.1.9 Sleep Timer 77
7.1.10 Battery Type 78
7.1.11 Bracketing 78
7.1.12 Front / Rear Dial 78
7.1.13 Rear Dial in P-mode 78
7.1.14 Dial Direction 78
7.1.15 AEL / AFL button 79
7.1.16 Release Button 79
7.1.17 AEL 79
7.1.18 AFL 80
7.1.19 M-Mode AEL 80
7.1.20 AF Assist Light 80
7.1.21 Flash Sync 81
7.1.22 Beep 81
7.1.23 Shutter in Tv/Av/P 81
7.1.24 Shutter in M/X 82
7.1.25 AF priority 82
7.1.26 Active Custom Set 83
7.1.27 Restore to Default 83
7.1.28 About System 83
7.2 Format Card 84
7.3 Power Management 84
Display OTime 84
Battery Charging 84
Auto Power Down 85
7.4 Check Disk 85
7.5 Storage Mode 85
7.6 File Format 86
7.7 Camera Mode 86
7.8 Shutter Latency 86
7.9 Image Orientation 86
7.10 Auto Preview Mode 87
7.11 Display 87
Brightness 87
Display OTime 87
Splash Screen 88
7.12 Ready Beep 89
7.13 Date And Time 89
7.14 Language 89
7.15 Restore to Default 90
7.16 Firmware 90
Restore Firmware 91
Dump Log 91
7.17 About 91
8.0 IQ Digital Back Overview 92
8.1 IQ180 Digital Back Specifications 93
8.2 IQ160 Digital Back Specifications 94
8.3 IQ140 Digital Back Specifications 95
9.0 Advanced 645 DF Camera Functions 97
9.1 Exposure Compensation 97
9.2 AE Lock 98
9.3 Metered-Value Dierence Indicator 99
9.4 Auto Bracketing 100
9.5 Taking Photos with the Mirror Up 102
9.6 Mirror Up Delay 103
9.7 Bulb Mode & Long Exposure 104
9.8 Camera Display Light 104
9.9 Front/Rear Dial Lock Mechanisms 105
9.10 Self-Timer Mode 106
9.11 Interval Photography 107
9.12 Depth of Field 108
9.13 Infrared Photography 109
9.14 Custom Function 110
9.15 Types of Custom Functions 111
6
9.16 Custom Dial Modes C1, C2 or C3 115
9.17 Lenses and Multi Mount 116
9.18 Functions of the Phase One Lens 116
9.19 Function of the Phase One Lens Adaptor 116
9.20 List of Alternative Lenses 117
10.0 Maintenance 118
10.1 Changing the Focusing Screen 118
10.2 Battery Socket 119
10.3 Tripod/Electronic Shutter Release Contact 119
10.4 Camera Display Error-Notication 120
10.5 Lens Maintenance 121
10.6 Back Maintenance 121
10.7 IR Filter on the CCD 121
10.8 645DF Camera Body Specifications 122
10.9 Phase One 645DF Housing Specication 123
11.0 Software 124
11.1 To Import Images... 124
12.0 End User Support Policy 125
12.1 Web Resources 126
13.0 Appendix: Open Platform 128
Double Exposure Protection 128
13.1 IQ Back and Phase One 645AF/DF and Mamiya 645 AFD 129
13.2 Mounting IQ back on the Phase One 645 AF &
Mamiya 645 AFD Series 129
13.3 More Details: Phase One and Mamiya 645 Series Cameras 130
Power Management and Shutter Latency 130
Studio Flash Sync on the Camera Body 130
Image Orientation 130
Mirror Up 131
T-mode on the Mamiya 645AFD 131
Viewnder Masking 131
14.0 IQ Back for Mamiya RZ67 132
14.1 Mounting IQ Back on the Mamiya RZ67 132
14.2 Viewnder Masking 133
14.3 More Details: Mamiya RZ67 134
Mode Selector 134
Shutter Latency Setting Mamiya RZ PRO II 134
Studio Flash Sync on the RZ lens 134
Mirror Up 134
Double Exposure 134
15.0 IQ Back for Hasselblad V Series 135
15.1 Mounting the IQ Back on a Hasselblad V Series 135
15.2 Mounting a Viewnder Mask on a Hasselblad V Series Camera 136
15.3 More Details: Hasselblad V Series 137
Sync Cable 137
Flash Lead Connection 137
Mirror Up and Shutter Latency Setting 137
Tethered Capture 137
15.4 Hasselblad 555 ELD 138
Shutter Latency Setting 138
Motor Cable on Hasselblad 555 ELD 138
15.5 Hasselblad 553 ELX 139
Cable Connections 139
Shutter Latency Setting 139
15.6 Hasselblad 501 CM and 503 CW without Winder 140
Shutter Latency Setting 140
15.7 Hasselblad 503 CW with Winder CW 140
15.8 Cables shipped with IQ back for Hasselblad V 141
16.0 IQ Back for Hasselblad H Series 142
16.1 Mounting the IQ Back on a Hasselblad H Series 142
16.2 Viewnder Masking 143
16.3 More Details: Hasselblad H Series 144
Camera Display 144
ISO Settings 144
Auto Exposure 144
Viewnder Information 145
Double Exposure Protection 145
Image Orientation 145
7
Flash Lead Connection 146
16.4 Cables Shipped with IQ back for Hasselblad H 146
17.0 IQ Back for Contax 645 147
17.1 Mounting the IQ Back on a Contax 645 147
17.2 Viewnder Masking 148
17.2 More Details: Contax 645 149
Exposure Modes 149
ISO Settings 149
Double Exposure Protection 149
TTL ash 150
Image Orientation 150
17.4 Flash Lead Connection 150
17.5 Cables Shipped with IQ back for the Contax 645 151
18.0 IQ Back for View Cameras 152
Phase One Sleeping Architecture 152
18.1 Using the 2-shot Release 153
18.2 Using the 1-shot Release 153
18.3 Phase One FlexAdaptor 154
18.4 Shutter Latency Settings for the FlexAdaptor and Other
Technical Camera Adaptors 154
19.0 List of Focusing Screens and Viewnder Masks 155
19.1 Full Frame Focusing Screens or with Engraved Masking 155
19.2 Viewnder Masks 155
20.0 Live View 156
20.1 Starting Live View 157
20.2 White Balance 158
20.3 Quality and Brightness 158
20.4 Zoom 159
20.5 Grid 159
20.6 Auto Stop and Start 159
20.7 Accessories 160
20.8 Live View Camera Support 161
View Cameras 161
Phase One 645AF/645DF 161
Hasselblad H1/ H2 161
Hasselblad V 162
Mamiya RZ67 Pro II/Pro IID 162
Contax 645 162
8
1.0 Introduction
Thank you for choosing the Phase One 645DF camera and the IQ Series
digital back solution.
The Phase One 645DF and IQ Series digital is the most powerful digital
camera solution whether you are working on location or tethered in a studio.
The Phase One IQ180, IQ160 and IQ140 digital camera backs feature maximum
resolutions of 80, 60.5 and 40 high-quality megapixels respectively. This
series sets new standards for medium format camera system handling and
performance.
The Phase One IQ Series system gives you the absolute best solution when it
comes to image quality and workow. Capture One has been optimized for
shooting with Phase One IQ digital backs, and is available for both Mac OS X
and Windows operating systems.
Together with the IQ series backs this professional RAW converter and image
editing software will deliver the World’s highest image quality with excellent
color and detail. The software comprises all the tools required to capture,
organize, edit, share and print images for an ecient workow.
The Phase One 645DF camera delivers incredible versatility with support for
what is arguably the widest array of focal plane and leaf shutter lenses on the
market. Phase One is committed not only to provide the best digital solution
for the professional photographer, but also to ensure the photographer’s
freedom of choice regarding lenses, bodies, back, software and accessories.
The entire system comes ready to use in its own customized weatherproof
camera case.
At Phase One we are always committed to providing you with the best
solution for the professional photographer. This Users Guide covers the
specic Phase One 645DF and IQ Series features and functionality.
We sincerely hope you will enjoy working with this innovative camera
platform and IQ Series digital back.
9
1.1 Warranty
Please read the enclosed warranty certicate. Should any problem occur,
please contact your local dealer (place of purchase) to facilitate a repair. DO
NOT try to repair the camera yourself. An unauthorized attempt to repair the
camera will terminate the warranty.
1.2 Installation and Activation of Software
An Internet connection is needed to install Capture One.
Install on Mac:
Capture One software includes an easy-to-use installer that will install all
the software necessary to run the application on Mac OS X 10.5.8 or later.
To install the software follow the procedure below:
1. Either load the Capture One DVD, or download the application from the
Phase One website: www.phaseone.com.
2. Open the Capture One disk image.
3. Read and accept the license agreement presented.
4. Drag the Capture One icon to the Applications folder.
5. Open Capture One from your Applications folder.
Install on Windows:
Capture One includes an easy-to-use installer that will install all the
software you need to run the application on a Windows based computer.
To install the software follow the procedure below:
1. Either load the Capture One DVD, or download the application from the
Phase One website: www.phaseone.com.
2. Run the executable software install le.
3. Read and accept the license agreement presented.
4. Follow the on-screen instructions to complete the installation.
N.B. Capture One will initiate installation of Microsoft® .NET Framework 3.0
if you don’t already have it installed on your computer.
10
1.3 Activation
An Internet connection is needed to activate and update
Capture One.
1. Open the license activation dialogue box via the menu Capture
One>License.
2. Enter your License code and personal details in the required elds. (You
should have received an email with your Capture One license code or it will
be in the original software packaging that you purchased).
3. Once you have entered the information press the Activate’ button and
your software will be validated by Phase Ones activation server.
Your software is now activated and ready for use.
Troubleshooting
If you are experiencing problems activating the software, follow the
instructions provided in the application, read the software manual
enclosed or visit our website for inspiration and troubleshooting:
http://www.phaseone.com/support
Deactivation of Capture One
An Internet connection is needed to deactivate Capture One.
1. Open the license dialogue box via the menu Capture One>License.
2. Press the Deactivate button.
3. Capture One will return to trial mode once it is deactivated. If the trial
period for the computer has expired, all current and pending processing
will be cancelled, and you will not be able to continue working with the ap-
plication until you reactivate it.
4. Conrm that you want to perform the deactivation. After doing so, you
can activate Capture One on another computer.
11
1.4 Screen Calibration
Having a properly calibrated monitor is a critical factor when viewing im-
ages. Ensure that digital viewing conditions are as accurate as possible. A
quality monitor and calibration tool should help guarantee that displayed
images on a screen are precisely rendered. Once a monitor has been
calibrated, the color and brightness controls should be locked to prevent
inadvertent changes.
Hardware-based monitor calibrators are now available at reasonable prices.
The process is simple, quick and enables images to be viewed with con-
dence. Many higher level monitors have internal calibrating software that
works with professional calibration devices for ultimate accuracy.
12
2.0 The 645DF Camera and IQ Digital Back System
The Phase One Camera system is created to provide as much exibility and
openness as possible. For years Phase One has oered two dierent digital
back or camera kit options; the Classic and Value Added.
2.1 Unpacking the 645DF and IQ Digital Back System
The Phase One 645DF and IQ digital back system is delivered in a case cre-
ated for the travelling photographer. The dimensions of this waterproof
and impact resistant roller case are compatible with most airlines carry-on
luggage requirements.
Classic:
• Phase One 645DF body
• IQ Digital Back
• Schneider Kreutznach 80mm LS f2.8 Lens
• Capture One software
• 1 Year warranty
Accessories
• Digital back battery
• Dual DB battery charger
• 4.5m FireWire 800 cable
• 3m USB3 cable
• Body and lens caps
• Camera neck strap
• Sensor cleaning kit
• Lens cloth
13
2.2 Value Added:
The waterproof roller case will hold:
• Phase One 645DF body
• IQ Digital Back
• Schneider Kreutznach 80mm LS f2.8 Lens
• Capture One Pro software
• 5 year Value Added warranty on IQ digital backs
Accessories
Waterproof roller hard case with room for 17” laptop
• Multimount adapter for HB V-lenses
• 2 lens wrappings
• 2 digital back batteries
• Extra camera battery cassette
• Dual DB battery charger
• DB Multi connector cable
• LCC calibration kit and 10x10cm plate
• CF card
• CF card reader
• 4.5m FireWire 800 cable
• 3m USB3 cable
• Grey card
• Sensor cleaning kit and lens cloth
• Body and lens caps
• Camera neck strap
The interior of the Value Added case can be customized and congured into
a bespoke system suitcase. An extra set of dividers are provided inside the lid
of the suitcase which can be used to divide the compartments into smaller or
dierent sections to make an ideal storage solution for a camera and lenses.
14
Classic Value Added
IQ Series digital back IQ Series digital back
Waterproof roller case (with room for
laptop up 17-inch)
Two lens wraps
1 year warranty on IQ digital back,
body and lens
5 year warranty on IQ digital backs
Dual Battery Charger Dual Battery Charger
1 Battery 2 Battery
Focusing screen or Viewnder
Masks depending on camera model
Focusing screen or Viewnder Masks
depending on camera model
4.5m FireWire 800 cable 4.5m FireWire 800 cable
3m USB3 cable 3m USB3 cable
Multi-connector>minijack adapt. cable
Multi-connector sync cable
CF card
CF card reader
Capture One DB software Capture One PRO software
Sensor cleaning kit Sensor cleaning kit
Lens cloth Lens cloth
LCC Calibration kit
Grey card
Lens cast calibration plate
Extra 645DF camera battery cassette
for AA batteries
645DF camera body 645DF camera body
Schedier 80mm LS f2.8 lens Schedier 80mm LS f2.8 lens
Hasselblad V-mount lens adapter
1 year or 100.000 shutter releases on
Schneider Kreuznach lenses
3 year warranty on Phase One AF/MF
lenses
Free digital back loan unit during repair
2.3 Classic vs. Value Added
All the elements of the Value Added kit are available to buy as separate
spare parts. Please consult your local dealer about the dierent Phase One
or third party solutions if extra equipment is needed.
Securing the operational time of a camera and digital back solution is a
critical concern for professional photographers. To be as safe as possible,
consult your dealer to get information on the best solution. Most uptime
solutions provided by Phase One can be purchased after acquiring the back
or camera.
The 645DF camera and SK LS lenses have a warranty of 1 year or 100,000
shutter actuations, whichever comes rst. Phase One AF/MF lenses have a
warranty of 1 year in Classic or 3 years in Value Added. Refer to the Warranty
Brochure, which is shipped with the with the Camera System.
15
2.4 Charging the Batteries for the IQ Digital Back
Charge the batteries as soon as the camera system has been unpacked.
The Value Added roller case is delivered with two 7.2 volt Lithium-Ion
batteries and a duo-charger.
Although only one battery can be used in the IQ back at a time, it is
recommended to charge both batteries fully before you start.
Always keep a battery in the IQ back even when shooting tethered to a
computer via a FireWire or USB connection. (Go to page 84 for more details
about charging the battery while tethered to a computer).
The battery charger can adapt to voltages within a range of 110 to 250 volts.
It comes with an international set of power adaptors (located in the suitcase
utility compartment). Please select the appropriate one that ts your outlet
and slide it in from the top to mount it in place securely.
Connect the unit to the outlet and charge the batteries (approximately 2.5
to 3 hours).
After the rst initial charge, the batteries can be charged one at a time.
Purchasing Extra Batteries
The Phase One IQ back comes with two batteries. Phase One recommends
the Canon BP 915 (with more than 2500 mAh) if you need to purchase extra
batteries.
Some third party batteries may not t into the digital backs battery
compartment due to dierences in the tolerances. Do not try to force a
battery into the compartment. When pressing the battery release button it
should slide in without being hindered.
Warning!
• Only use the Charger to charge the specied batteries
• Do not allow charger to get wet or get exposed to moisture
• Keep the Charger out of reach of children
• Once charging is completed, unplug the charger from power source
• Only use the original mains adaptor 12V DC or car lead
• Never apply excessive force when connecting or disconnecting a battery or contact plate.
• Keep all contacts clean.
• Do not force down any of the contacts.
• Do not short-circuit the contacts.
• Never store the battery connected to the charger for an extensive period of time.
• Do not expose to excessive heat or naked ame.
• Do not dismantle or carry out any alteration to the product
• Do not attempt to eat or swallow the battery
16
2.5 Batteries for Camera
Set the shutter release mode selector lever to L (to turn the power o).
Use six AA alkaline or rechargeable batteries.
NiCd or NiMH batteries should only be used in the camera body if CF04 is set
on rechargeable.
1. Lift the battery case lock lever, turn it counter clockwise and pull out the
battery holder.
2. Insert fresh batteries with the + and - ends as shown in the
illustration.
3. Return the battery holder to its case and lock it by turning the lever
clockwise. Make sure it is rmly attached.
N.B. Ensure that the batteries are placed with proper polarity.
Checking the Battery Power
Set the Drive dial lever to S (to turn the power on).
Check the battery condition in the lower left corner of the top LCD screen.
Always use six new batteries of the same type when replacing batteries. Do
not mix dierent types of batteries or use old batteries with new ones. The
camera will not function without a power source.
Never throw out batteries. When a battery does not work, deliver the
battery for appropriate disposal.
C
S
L
M.UP
The batteries are suciently charged.
There is little power remaining. Have new
batteries on hand. Camera will still operate.
There is very little power remaining. Camera
will not operate. Set the shutter release mode
selector lever to “L (to turn the power o) and
replace the batteries with new ones.
When the batteries are emptied for power,
“batt” ashes on the main LCD and the
viewnder’s LCD when the shutter release
button is pressed.
17
2.6 Sleep Mode
The cameras power is switched on when the shutter release mode selector is
set to S, C or M.UP. In order to prevent the cameras batteries from discharging,
sleep mode is automatically entered if no operations are performed for a
specic period of time while the power is ON (with exposure metering status
maintained).
In sleep mode, operating the shutter button or a function setting button
restores power ON status.
In sleep mode, the external LCD screens are not active, only the marks shown
in the gure are displayed. (These marks appear in program AE mode.)
1. Battery life of the originally supplied batteries is dependent on storage
conditions.
2. Blots and ngerprints on battery terminals may cause loose connection
and corrosion. Wipe them o before loading the batteries.
3. It is advised to carry spare batteries in remote or foreign locations.
4. Battery performance decreases in low temperatures. Keep them warm
when in cold climates or locations. External battery case PE401 is available as
an optional accessory.
5. Store the batteries in a cool and dry place, away from direct sunlight.
6. Remove the batteries from the camera body when they will not be used
for a long time.
7. Replace the batteries with new ones as soon as they are exhausted. Liquid
leakage from the battery may damage the camera.
8. Read the warnings on the batteries for their handling.
For the purpose of the descriptions and
explanations provided in these instructions, it
is assumed that the cameras power is on.
18
2.7 Attach and Remove a Lens
1. Remove the front body cap in the same way that you would remove a lens;
push the lens release button [A] backward and then turn the front body cap
or the lens itself counter clockwise and lift out.
2. Align the white alignment dot of the lens [B] (on the shiny ange) with the
cameras white dot [C]. Mount the lens and rotate it clockwise until it clicks
into place.
3. To remove the front lens cap, squeeze the shiny sections together and lift
out. (See image far left). To remove rear lens cap turn it counterclockwise.
Remove a Lens
While sliding the lens release button[A] back, rotate the lens counter
clockwise until it stops, and lift it o. After removing the lens from the camera
body, protect both ends by attaching the caps.
N.B. Oil, dust, ngerprints or water on the electronic contacts could result
in malfunction or corrosion. Wipe such impurities o with a clean piece of
cloth. Do not tap the distance ring or other rotating parts when attaching
the lens. When installing a lens, do not press the lens release button.
MF
80mm
1:28
AF
22
22
11
11
4
4
ft
m
A
80mm
1:28
MF
AF
11
4
4
22
22
20
0
5
ft
m
C
B
80mm
1:28
MF
AF
11
11
4
4
22
22
20
0
5
A
11
11
4
4
22
22
20
ft
m
19
Attach a Leaf Shutter Lens
Leaf shutter lenses are equipped with an internal shutter. Leaf shutter
lenses are capable of high shutter speeds 1/800 sec. or 1/1600 on IQ Series
backs with ash synchronization, which is particularly useful for ll-in ash
photography in bright ambient shooting conditions.
When a leaf shutter lens is attached and the leafshutter is used and the letters
LS will appear in the main LCD screen.
2.8 Adjusting the Strap
Put the neck strap through the mounts and secure it to the buckle as
illustrated. After attaching the strap, pull it and ensure it does not loosen at
the buckle.
20
2.9 Attaching the IQ Back
The IQ back is fully integrated with the camera body and functions as a part
of the whole camera system.
Ensure that the Phase One 645DF camera mirror is up and the shutter is open
when no digital back is attached.
When attaching the IQ back to the camera body the shutter will close and
the mirror come down.
First remove the cover. Next, ensure that the bottom part of the IQ back is
placed correctly in the lower locking mechanism on the back of the camera
body before the upper locking mechanism [A+B] is pressed together. Failure
to do this can cause an error with the camera body where the shutter will
continuously open and close. If this occurs, remove the IQ back. Make sure the
camera body is powered, press button [2] while mounting the digital back,
lock the mounted back by pressing [1].
Please be aware that the shutter should be in the correct starting position
(shutter open). If this is not the case, attach and remove the IQ back again to
make sure that the camera body gets in the correct starting position.
Remove the IQ back by sliding the back lever [1], pushing in button [2], and
by gently pulling away the top of the back rst. Be careful with the contacts
and protective glass on the back. Your IQ back should always be protected
by its plate when it is not attached to the camera.
A
B
1
2
3
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162

Phase One iQ Series User guide

Type
User guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI