Addonics Technologies SU3CS User manual

Brand
Addonics Technologies
Model
SU3CS
Type
User manual
Technical Support
If you need any assistance to get your unit functioning properly, please have
your product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
www.addonics.com
T E C H N O L O G I E S
Sapphire USB 3.0 / eSATA Drive Enclosure
(SU3CS)
User Guide
www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
1
Unpacking and Overview
SU3CS
Front View
Back View
Inside View
2
4
31
2
3
4
1. On/Off Switch
2. Cooling Fan
3. Power Connector
4. USB 3.0 Port
1. 4P Molex Power Connector
2.
SATA-USB 3.0 Bridge
3. SATA Device Connector
4. Power Board
Mounting Holes
www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
eSATA cable USB Cable
Power Cable
1. Loosen the two cover screws on the back of the unit found on the left and
right edges. Remove the rear cover, then slide the top cover off.
2. Remove the front plate and replace with a 5.25" drive, or a 2.5" or 3.5"
device mounted in a 5.25" mounting bracket using the 5.25" drive
mounting holes.
3. Reassemble the unit.
4. Connect the power supply from an AC outlet to the back of the unit.
5. Connect an eSATA or USB host to the unit and turn it on.
NOTE: When connecting the unit to a host using USB, there must be no cable connected to the
eSATA port on the back of the unit.
Installation
www.addonics.com
Phone: 408-573-8580
Fax: 408-573-8588
Email: http://www.addonics.com/sales/query/
CONTACT US
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Addonics Technologies SU3CS User manual

Brand
Addonics Technologies
Model
SU3CS
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents