2. Crystorama
  3. ODE-700-BK-GA
ODE-700-BK-GA

Crystorama ODE-700-BK-GA User manual

  • Hello! I've reviewed the assembly instructions for the CRYSTORAMA ODE-700-BK-GA light fixture and am ready to answer your questions. This document outlines the steps for assembling the light as either a pendant or ceiling mount, parts inventory, and bulb requirements.
  • What type of bulb is required?
    What is the recommended wattage for the bulbs?
    What kind of bulbs are recommended for extended use?
ODE-700-BK-GA
You will need 4 Candelabra Base Bulb
40 Watts Recommended 60 Watts Max.
USE LED BULBS FOR EXTENDED USE
How to Install
Do a complete inventory of all parts and components
before you start installing.
Decide the preferred hang stem length .Pass the fixture
wire through the stems and swivel and canopy and screw
them together.
Fasten mounting plate to outlet box with the machine
1.
2.
3.
[
∅
51
2"]
[1"]
[9"]
[61
8"]
[
∅
14"]
[3"]
[141
8"]
[561
8"]
FOR PENDANT
FOR CEILING
screws.Place the fixture against mounting surface allowing
the machine screws to pass through the canopy,and secure
it with ball nuts.
#ODE-700-BK-GA
A. (3)-Stems
D0.63X12” (XBN700BKGASTEM12IN)
B. (1)-Stems D0.63X6”
(XBN700BKGASTEM6IN)
C. (1)-Stems D0.63X3”
(XBN700BKGASTEM3IN)
D. (1)-Mounting Hardware
E. (1)-Canopy D5
1/2*H1“ (XBN700BKGACAN5.5IN)
F. (2)-Ball nut
D2/5*2/5” (XBN700BKGABANUT) G.(1)-
Swivel D 1/2* 1/5“
H. (4)-Candle
Sleeve;L2” (XBN700BKGACDL2IN)
I. (1)-Finial D 3/4”
(XBN700BKGAFIN )
/