PREMIER 1 530020 User manual

Installation Instructions

STEP

On the inside of the

bucket, attach washer

and tighten with screw

while holding onto the

drinker to keep

it straight.

Fill bucket to begin

water ﬂow.

On the outside of the

bucket, thread the

drinker into hole.

STEP

Using a square or round

bucket, drill a 3/8" hole

with center 3/4" from

bucket bottom.

STEP

DRILL

with 3/8" bit

RED BOWL DRINKER

BUCKET(S)

WHAT YOU WILL NEED

Download PDF