2. PREMIER 1
  3. 530020

PREMIER 1 530020 User manual

  • Hello! I've reviewed the Installation Instructions for the Red Bowl drinker. This document provides guidance for installing the drinker onto a bucket, including how to prepare the bucket and attach the drinker components. I'm ready to answer any questions you may have about the installation process or the drinker itself.
  • What size hole is needed to install the drinker?
    How far from the bottom should the hole be drilled?
    What is the last step before using the drinker?
Installation Instructions
STEP
3
On the inside of the
bucket, attach washer
and tighten with screw
while holding onto the
drinker to keep
it straight.
Fill bucket to begin
water flow.
On the outside of the
bucket, thread the
drinker into hole.
STEP
2
Using a square or round
bucket, drill a 3/8" hole
with center 3/4" from
bucket bottom.
STEP
1
DRILL
with 3/8" bit
RED BOWL DRINKER
BUCKET(S)
WHAT YOU WILL NEED
/