Omlet Cube MK1 Operating instructions

Run Clip x25

810.0013

Run Panel Cube Skirt Link x2

041.1060 Cable Tie x6

800.0048

Remove the End Panel and End Skirts from Eglu Cube Run.

Remove a Lower Panel on your Walk In Run.

Eglu Cube Run attached to Walk In Run

What You Have Received:

Step 1 - Remove end of Cube Run

Step 2 - Attach Cube Run to Walk In Run

Clip Positions for Skirt

Link Panels

Pole Clips

Attach the Eglu Cube & Run to the Walk In Run using Clips,

Cable Ties and Pole Clips in the positions shown.

On side of Cube Run aligned with a pole, attach using Pole

Clips already in position on the Walk In Run.

Cable Tie positions are highlighted with a

Attach Run Panel Cube Skirt Links to form an unbroken skirt

around the run.

Eglu Cube & Run Connection Kit Instructions

www.omlet.co.uk

0044 (0)1295 570 094

the joy of pets