2. Omlet
  3. eglu classic

Omlet eglu classic Operating instructions

  • Hello! I've reviewed the Classic Connection Kit instructions and I'm ready to assist you. This document details how to connect the kit to your Eglu Classic and Walk In Run using various panels, clips and cable ties. I can answer questions about the included components and the steps to connect everything correctly.
  • What parts are included in this kit?
    How do I attach the Classic Link Panels to the Eglu Classic?
    What should I do with a Lower Panel on Walk In Run?
Run Panel Connection
041.1050
Run Panel Classic Link x2
041.1051
Washer x4
800.0035
Eglu Classic Connection Kit Instructions
Attach the Classic Link Panels to the Eglu Classic using the
4 bolts and washers. Screwing them on will also curve the
panels fitting them to the Eglu Classic Front Face.
Replace a Lower Panel on your Walk In Run with the Run
Connection Panel.
Attach the Eglu and Link Panels to the Walk in Run using
Clips and Cable Ties in the positions shown.
Cable Ties on one side are highlighted with a
www.omlet.co.uk
[email protected]
0044 (0)1295 570 094
the joy of pets
What you have received:
Cable Tie x6
800.0048
Run Clip x25
810.0013 Bolt x4
800.0003
Bolt x4
800.0003
Classic Connection Kit
Part number
Description
Qty.
Packed
041.1050
Run Panel Connection
1
041.1051
Run Panel Classic Link
2
800.0003
Machine Screw M6 x 16mm Pozi-
Pan
4
800.0035
Washer ID8 OD38
4
800.0048
Cable Tie 6”
6
810.0024.025000
Run Clips (Bagged) 25pk
1
-
Classic Connection Instructions
1
X 4
X 4
X 25
X 6
X 1
/