2. POWERSHIELD
  3. NetMate
NetMate

POWERSHIELD NetMate Installation guide

  • Hello, I have reviewed the Netkit user manual and I'm ready to answer any questions you might have. This document focuses on the installation and initial use of the Netkit software, covering steps from running the installer to basic setup. I can help with any questions you might have regarding the described instructions.
  • How do I start the installation?
    What language options are available for installation?
    How do I connect the hardware?
Software Of Netkit Installation Way
1. Double click “setup.exe”, select English,then click “确定”.
2. Click “Next”, browse the installed location,then click “Next”.
3. Select “English installation”,click “Next”,click “Next”again.
4. Click“Next”,click “Finish”.
NetKit(1).rar
Netkit Package
Netkit Software Installation Guide
1
The way to use Netkit software
1. Connect the NetmateLite card to the computer with network cable.
2. Open “Netkit.exe”.
3. Select “NML” at the right top corner,and then click “Search”.
4.You will get its IP as follow.
4. You can also change its IP by clicking “Network Settings”.
Netkit package
NetKit(1).rar
2
/