Alarm.Com ADC-ACX1 Quick start guide

Alarm.Com
Brand
Alarm.Com
Model
ADC-ACX1
Category
Security door controllers
Type
Quick start guide
QUICK START GUIDE
SMARTER
ACCESS
CONTROL
Smarter Access Control Quick Start Guide 1
Pre-Installation Checklist
Ensure your customer has an Alarm.com account with
a service plan that supports Access Control.
Mount and wire all system hardware according
to manufacturer’s installation instructions.
System hardware may include:
• ADC-ACC1-17 Door Controller
• Up to eight total ADC-ACX1 and ADC-ACX2
expansion modules
• Power source
- External power supply (included in ADC-ACC1-17-
PSE Door Controller and Power Kit), or
- PoE (Power over Ethernet) connection
• Wiegand readers or keypads
• Electric strikes, mag locks, or other electrified
locking hardware
• Request-to-exit devices
• Door position switches
• Other peripherals
• Cards, fobs, or other access credentials
• Internet access using an Ethernet cable
2 Smarter Access Control Quick Start Guide Smarter Access Control Quick Start Guide 3
Expanded
Configuration
Add up to 8
expansion modules
to the ADC-ACC1-17
to control up to
17 readers.
ADC-ACX1
ADC-ACX2
ADC-ACC1-17
Reader
Reader
Reader
Reader
System Configuration
Basic Configuration
Control up to 2 readers with the
ADC-ACC1-17 Door Controller.
Reader
ADC-ACC1-17
Reader
For detailed wiring guides, please
see the device installation manuals.
For detailed wiring guides, please
see the device installation manuals.
4 Smarter Access Control Quick Start Guide Smarter Access Control Quick Start Guide 5
Add Hardware to Alarm.com Account
Controllers
1 Disconnect any Ethernet cables from all controllers
in the system.
2 Navigate to the Access Control tab on the
Equipment page on the Dealer Website.
3 Add a controller using the “Add Controller” button.
Follow on-screen instructions. You’ll need the
controller’s MAC address, which is located on the
side of the Ethernet port.
4 Repeat for all additional controllers in the system.
Expansion Modules (If None, Skip to Step 7)
5 To add an expansion module to a controller, click
the “Add Expansion Module” link displayed next to
the controller in the Controllers table.
Follow on-screen instructions.
6 Repeat for all expansion modules in the system.
Doors
7 To add doors to a module, click the “Add Door” link
displayed next to the module in the Devices table.
Follow on-screen instructions.
8 Repeat for all doors in the system.
Check Connection
9 Connect an internet-connected Ethernet cable to
each controller and power up the system.
10 Check the Event History on the Dealer Website to
make sure the controller is communicating.
Add Card Formats to Account
11 On the Access Control tab on the Equipment page,
click “Manage Card Formats.”
12 If you know the card format and facility code,
click “Add Known Format” and follow the
on-screen instructions.
13 If you do not know the card format or facility code,
click “Add Unknown Format” and follow the
on-screen instructions.
14 Repeat steps 12 and 13 for all card formats you plan
to use with this system and click “Save.”
To add or manage Users, Access Plans, and Timetables,
navigate to the User Access tab on the Customer
Website or Mobile App.
Questions? Visit alarm.com/accesscontrolhelp
© 2017 Alarm.com. All rights reserved.
8281 Greensboro Drive, Suite 100
Tysons, VA 22102 171011
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Alarm.Com ADC-ACX1 Quick start guide

Alarm.Com
Brand
Alarm.Com
Model
ADC-ACX1
Category
Security door controllers
Type
Quick start guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents