IMPORTANT : RETAIN FOR FUTURE REFERENCE
READ CAREFULLY
ATLeisure, LLC
Toll Free: 1-855-880-7205 (English is offered)
8am - 5pm, Monday through Friday, Eastern Standard Time
Email: customerser[email protected] or visit our website at www.atleisure.com
DO NOT RETURN TO STORE
For indoor/outdoor domestic use only. Not for commercial use.
Designed in USA
Made in China
For assistance with assembly, parts, or customer service, please contact:
Concrete Umbrella Stand
Assembly & Care Instructions
Item: M51776
Model: UMB-939105
2
Contents
Package Contents ............................2
Assembly ..................................3-4
Replacement Parts ...........................5
Care and Maintenance .........................5
Warnings and Cautions ........................5
Warranty ...................................6
Before assembling make sure all parts are present. If any part is missing or
damaged, do not attempt to assemble the product. Contact our customer service
representative for assembly assistance or questions toll free at 1-855-880-7205.
Package Contents
H
G
E
D
I
A
3
Assembly
Step 1: Place components on flat surface. Align plastic nut (C) with bolt (B) and
rotate towards the right until fastened in place.
Step 2: Slide shim (I) onto bolt (B). Place decorative ring (D) on top of shim.
Step 3: Screw tube (E) onto bolt (B) to secure.
Step 4: Fasten locking bolt (G) to small nut (F) on side of tube (E).
4
Assembly
Step 5: There are 3 ring adapters (H) inside umbrella tube. All 3 adapters must
be removed to accommodate large pole. The first two adapters may be easily
removed but the third may require force. Select suitable adapter according to
pole size. If using small or medium size pole, layer adapters within one another
to create tight fit.
H
E
Dia 30mm pole
Dia 35mm pole
Dia 38mm pole
Dia 45mm pole
Step 6: When ready to use, place umbrella in tube and tighten locking bolt (G)
to secure. Locking bolt (G) should press the surface of the ring adapter (H) to
avoid damaging the surface of the umbrella pole.
5
Replacement Parts
For replacement parts, call our customer service department at:
1-855-880-7205, 8am - 5pm EST, Monday - Friday.
Part Description Re-order Number
A Base BSE-ABSE-50-BRZ
B Connected Bolt BSE-BBLT-50-SLVR
C Plastic Nut BSE-CPN-50-BRZ
D Decorative Ring BSE-DDR-50-BRZ
E Tube BSE-ETBE-50-BRZ
G Locking Bolt BSE-GLB-50-BRZ
H Ring Adapter BSE-GLB-50-BRZ
BSE-HADPTM-50-BRZ
BSE-HADPTS-50-BRZ
I Shim BSE-ISHM-50-BRZ
Care and Maintenance
• All outdoor furniture is subject to UV rays and weather elements. In order to
keep your furniture vibrant, simply clean with mild soap and warm water. Rinse
and dry thoroughly.
• Do not use abrasive materials, cleansers, or bleach products on this furniture.
• To prevent stand from eroding, DO NOT use acids to clean it.
Warnings and Cautions
WARNING: This item is heavy. Use care when handling
6
Warranty
90 DAY WARRANTY
This product is covered under a manufacturer’s 90 day warranty from date of
purchase against defects in materials and workmanship. This warranty does not
cover damage due to neglect, abuse or weather related damage. For full warranty
disclosure, email us at customerser[email protected], call toll free at 1-855-880-
7205 or send mail to: 1040 Boulevard SE Ste. B, Atlanta GA 30312
HOW TO FILE A CLAIM
If you are within your warranty you must have your receipt and pictures of your
information to send to ATLeisure at customerser[email protected], or send by mail
to 1040 Boulevard SE Ste. B, Atlanta GA 30312. This warranty gives you specific legal
rights, and you may also have other rights which vary from state to state.
ATLeisure, LLC
1040 Boulevard SE, Suite B
Atlanta, Georgia 30312, USA
Customer Service Toll Free 1-855-880-7205
8am - 5pm Eastern Time, Monday through Friday
www.atleisure.com
/
