Atleisure UMB-M64846 User manual

  • Hello! I am an AI chatbot trained to assist you with the Atleisure UMB-M64846 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
9' Rain Style
Fiberglass Umbrella with Cover
Assembly & Care Instructions
IMPORTANT : RETAIN FOR FUTURE REFERENCE
READ CAREFULLY
Toll Free: 1-855-880-7205 (English is offered)
8am - 5pm, Monday through Friday, Eastern Standard Time
DO NOT RETURN TO STORE
For outdoor domestic use only. Not for commercial use.
Designed in USA
Made in China
For assistance with assembly, parts, or customer service, please contact:
Item: M64846
Model: UMB-M64846
Dusty Taupe, Denim Blue, Grey , Burgundy
Package Contents |
PART DESCRIPTION PICTURE QTY(PC)
A Umbrella Frame with
Canopy
1
B Bottom Pole 1
C Finial 1
D Removable Cover 1
No hardware required for assembly.
Warnings & Cautions
Always take the umbrella down when not in use.
Keep children away from umbrella during assembly to avoid injury.
To prevent damage to the canopy, open the umbrella facing the opposite direction that
the wind is blowing.
Note: We recommend that you insert the umbrella into an umbrella base or table (not
included) for securing the umbrella.
Note If the crank becomes too hard to crank, check to see if the rope has come off the pulley.
If you continue to turn the crank, the rope or crank handle could break.
IMPORTANT: Do not use this umbrella during periods
of high winds and rain. Failure to do so may result in
personal injury and/or damage.
2
Before beginning assembly of product, make sure all parts are present.
Compare parts with package contents list and diagram above. If any part is
missing or damaged, do not attempt to assemble the product or return to the
place of purchase. Contact our customer service toll free at 1-855-880-7205
for replacement parts or further instructions.
Estimated Assembly Time: 10 minutes
Tools required for Assembly: No tools required
Preparation
Step 2: To assemble
the two pole pieces
together: Insert the
bottom pole into the
upper pole while
pressing the snap
button on the upper
pole until the snap
button locks into
position.
Step 3: : Turn the crank handle
in clockwise direction to open
the umbrella canopy, opposite
direction to close the canopy.
TO CLOSE THE UMBRELLA IT MUST
BE IN THE UPRIGHT POSITION.
Turn the crank handle in the
clockwise direction and it will
automatically tilt the umbrella
to an angle. It will automatically
come back to original position
if turning the crank handle in
the counterclockwise direction.
3
Step 1: Attach the finial on the
umbrella top (if unattached) by
screwing the finial onto the
threaded screw-in adapter on
the umbrella top. Twist until
secure but, do not over tighten.
| Set-Up & Operation
Take all parts out of the box. If any parts are missing. Call our Customer Care Service toll
free at 1-855-880-7205.
Note: We recommend that you insert the umbrella into an umbrella base or table
(not included) for securing the umbrella.
Step 4:
Tilt Button
CANOPY CARE INSTRUCTIONS:
Simply clean the umbrella canopy with soft brush and mild detergent.
DO NOT machine wash or dry.
DO NOT iron.
AIR DRY the canopy thoroughly before storing for extended period of time.
Make sure the canopy is completely open during drying process to prevent
shrinkage.
Note: Placement of the umbrella over or near a swimming pool can cause premature
fading of the canopy. This is not covered under our warranty.
HOW TO CHANGE CANOPY INSTRUCTIONS:
1. Remove your umbrella from the table or stand.
2. Unscrew finial from the top of the umbrella.
3. Take the canopy off each one of the ribs.
4. Replace new canopy back onto each one of the ribs.
5. Attach the finial to the top of the umbrella.
6. Place umbrella back into the table or stand.
4
Care & Maintenance |
DESCRIPTION PICTURE RE-ORDER NO.
Finial FNL-38S-BRZ-T
Bottom Pole
(Snap in 38mm) BMP-38SSN-BRZ-T
Canopy CAN-9MRF8RBP-T-B,
DB, DT, G
Cover CVR-9M8RBP- B,
DB, DT, G
Filing a Claim
If you are within your warranty, to file a claim you must have your receipt and pictures
of your damaged umbrella and send to ATLeisure at [email protected],
or by mail to 1040 Boulevard SE Ste. B, Atlanta GA 30312.
Replacement Parts
For replacement parts, call our customer service department at 1-855-880-7205,
8:00am-5:00pm., EST, Monday-Friday.
| Warranty
ONE YEAR WARRANTY
This product is covered under a manufacturers one year warranty from date of
purchase against defects in materials and workmanship. This warranty does
not cover damage due to neglect, abuse or weather related damage. For full
warranty disclosure, email us at customerser[email protected]om, call toll free
at 1-855-880-7205 or send mail to 1040 Boulevard SE Ste. B, Atlanta GA 30312.
This warranty gives you specic legal rights, and you may also have other rights which
vary from state to state.
This Atleisure product is covered by U.S. Patent No. 7,533.679 and U.S. Patent No. 7,604,015.
5
www.atleisure.com
ATLeisure LLC
1040 Boulevard SE, Suite B
Atlanta, Georgia 30312
Customer Service Toll Free 1-855-880-7205
8am- 5pm Eastern Time, Monday through Friday.
/