PEAK MACH-801 User manual

MACH-801
PEAK
Brand
PEAK
Model
MACH-801
Type
User manual

PEAK MACH-801 is a versatile tattoo machine capable of lining, shading, and color packing with precision and control. Weighing only 5.6 ounces, it features a powerful motor and a user-friendly interface with a digital display for precise voltage adjustment. The MACH-801 operates with both standard cartridges and traditional needles, and its RCA connection ensures compatibility with most power supplies. With its durable construction and可靠性, the PEAK MACH-801 is an excellent choice for tattoo artists of all skill levels.

PEAK MACH-801 is a versatile tattoo machine capable of lining, shading, and color packing with precision and control. Weighing only 5.6 ounces, it features a powerful motor and a user-friendly interface with a digital display for precise voltage adjustment. The MACH-801 operates with both standard cartridges and traditional needles, and its RCA connection ensures compatibility with most power supplies. With its durable construction and可靠性, the PEAK MACH-801 is an excellent choice for tattoo artists of all skill levels.

THE EVOLUTION
HAS BEGUN
MANUAL
Peak’s first-ever battery packs
deliver consistent wireless power
to your favorite tattoo machines.
3.5MM
TABLE OF CONTENTS
PEAK FORGE DIAGRAM
TECHNICAL SPECIFICATIONS
KEY FEATURES
HOW TO USE YOUR PEAK FORGE
PEAK WARRANTY INFORMATION
PAGE 1
2
3
3
4
5
PEAK FORGE DIAGRAM
DISPLAY
VOLTAGE
BATTERY CHARGE
TIMER
PAGE 2
POWER BUTTON
REMOVABLE
BATTERY
VOLTAGE
ADJUSTMENT
BUTTONS +/-
3.5MM CONNECTOR
FAULT CODES*
IF SHOWN WILL
REQUIRE REBOOT
*MORE INFO ON PAGE 4
E2
E1
SHORT CIRCUIT
OVER CURRENT
E3
FAULTY CORD
Material: Aluminum
Size: 2 5/8" (~66mm) height, 1.25" (~32mm) width
Net Weight: 91g (with battery), 59g (without battery)
Battery Type: Li-polymer battery
Battery Capacity: 2000mAh
Operating Voltage: 4v–12v*
Increment/Decrement Voltage Interval: 0.1v
Battery Life: Up to 10 hours when fully charged*
Charge Time: 1.5 hours when used with 2Amp 5v adapter
Battery Charger: Efest Luc V8 8-port battery charger
(purchased separately)
Jumpstart Voltage: 9v in 0.2 seconds
Package Includes: (1) battery pack and (1) 2000mAh
removable battery
*Some tattoo machines require a minimum voltage to operate correctly. Check your tattoo machine manufacturer’s voltage
requirements before using with the Peak Forge.
*Battery life varies based on (but not limited to) your motor, stroke length, voltage, needle grouping, and pigment thickness.
Durable aluminum housing with removable, rechargeable battery
Lightweight and compact
Automatic jumpstart feature
Automatic shut-off if no activity is recorded for 5 minutes
Automatic dimming feature if no buttons are pressed for 10 seconds (significantly saves battery capacity)
Comes with your choice of RCA connector or 3.5mm connector
Comes in black, pink, or red
TECHNICAL SPECIFICATIONS & KEY FEATURES
TECHNICAL SPECIFICATIONS
KEY FEATURES
PAGE 3
To turn on the Forge-C without the jumpstart feature, long-press the power button .
Your machine will start with previously adjusted voltage.
1
2
3
5When you’re ready to recharge, power off the Forge, unscrew the top lid, remove the 2000mAh battery,
and charge it with a compatible charger.*
To start or pause your machine, press the power button whenever you want. When running the display
will cycle through VOLTAGE, BATTERY CHARGE, and TIMER.
To turn on the Forge-C with the jumpstart feature, quickly double press the power button .
NOTE: *We highly recommend you charge your Forge using the compatible Efest Luc V8 8-port battery charger.
HOW TO USE YOUR PEAK FORGE
USING YOUR PEAK FORGE BATTERY PACK
PAGE 4
4To adjust the voltage, press the button to increase or the button to decrease.
FAULT CODES
This means there is a short somewhere. Take battery off and try with another direct
drive pen to see if error persists. If battery works on a new machine, that means the
original machine has an issue potentially with the motor. If the battery continues to
display E1, that means the battery will need to be replaced.
E1
SHORT CIRCUIT
This means overcurrent protection. Please open the machine and check to see if the
motor is stuck or the drive bar or motor is broken. If all appears to be working, please try
a softer membrane needle. An E2 error means there is an issue somewhere outside the
battery, and the battery is protecting itself by displaying the E2 error.
E2
OVER CURRENT
This means that the charging cord is faulty. Please change to a new cord and try
again.
E3
FAULTY CORD
WARRANTY INFORMATION
WARRANTY INFORMATION
PAGE 5
If you experience any technical issues or your Forge battery pack requires repairs, please contact our customer
service team at 410-712-0145. After our customer service team provides you with a return authorization, you can
download and fill out our Peak Repair Order Form:
Mail your completed repair order form, battery pack, and invoice as proof of purchase to 7410 Coca Cola Dr STE
108, Hanover, MD 21076. You can also direct any questions or concerns regarding issues with your Peak Forge
battery pack to info@peakneedles.com.
If you purchased your Forge less than a year ago, we will replace it with a brand new model. If your machine is
older than a year, it is unfortunately no longer protected under our one-year warranty.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

PEAK MACH-801 User manual

MACH-801
PEAK
Brand
PEAK
Model
MACH-801
Type
User manual

PEAK MACH-801 is a versatile tattoo machine capable of lining, shading, and color packing with precision and control. Weighing only 5.6 ounces, it features a powerful motor and a user-friendly interface with a digital display for precise voltage adjustment. The MACH-801 operates with both standard cartridges and traditional needles, and its RCA connection ensures compatibility with most power supplies. With its durable construction and可靠性, the PEAK MACH-801 is an excellent choice for tattoo artists of all skill levels.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents