Peak Needles ForgeC 3 User manual

ForgeC 3
Brand
Peak Needles
Model
ForgeC 3
Type
User manual

Peak Needles ForgeC 3 is a wireless power supply for tattoo machines, with a built-in 2000mAh battery that provides up to 10 hours of operation. It features an automatic jumpstart function for quick starts, and automatic shut-off after 5 minutes of inactivity to save battery. The voltage can be adjusted from 4V to 12V in 0.1V increments, and the current voltage is displayed on the screen. It comes with a USB-C charging cable and is available in black, pink, or red.

Peak Needles ForgeC 3 is a wireless power supply for tattoo machines, with a built-in 2000mAh battery that provides up to 10 hours of operation. It features an automatic jumpstart function for quick starts, and automatic shut-off after 5 minutes of inactivity to save battery. The voltage can be adjusted from 4V to 12V in 0.1V increments, and the current voltage is displayed on the screen. It comes with a USB-C charging cable and is available in black, pink, or red.

THE EVOLUTION
HAS BEGUN
MANUAL
3.5MM
Peak’s first-ever battery packs
deliver consistent wireless power
to your favorite tattoo machines.
TABLE OF CONTENTS
PEAK FORGE-C DIAGRAM
TECHNICAL SPECIFICATIONS
KEY FEATURES
HOW TO USE YOUR PEAK FORGE-C
PEAK WARRANTY INFORMATION
PAGE 1
2
3
3
4
5
8.0V
PEAK FORGE-C DIAGRAM
PEAK
BATTERY CAPACITY
CURRENT VOLTAGE WHEN CHARGING
IS DISPLAYED
VOLTAGE ADJUSTMENT BUTTONS +/-
POWER BUTTON
START/PAUSE
JUMPSTART ON/OFF
USB-C INPUT
3.5MM CONNECTOR
PAGE 2
BATTERY PACK
BATTERY BUILT
INTO HOUSING
FAULT CODES*
IF SHOWN WILL
REQUIRE REBOOT
*MORE INFO ON PAGE 4
E2
E1
SHORT CIRCUIT
OVER CURRENT
E3
FAULTY CORD
Material: Aluminum
Size: 2” (~50mm) height, 1.25” (~32mm) width
Net Weight: 64g
Battery Type: Li-polymer battery
Battery Capacity: 2000mAh
Operating Voltage: 4v–12v*
Increment/Decrement Voltage Interval: 0.1v
Battery Life: Up to 10 hours when fully charged*
Charge Time: 1.5 hours when used with 2Amp 5v adapter
Battery Charger: DC5V/2A (standard USB adapter)
Battery Charging Cable: USB-C cable
Jumpstart Voltage: 9v in 0.2 seconds
Package Includes: (1) battery pack and (1) USB-C
charging cable
*Some tattoo machines require a minimum voltage to operate correctly. Check your tattoo machine manufacturer’s voltage
requirements before using with the Peak Forge-C.
*Battery life varies based on (but not limited to) your motor, stroke length, voltage, needle grouping, and pigment thickness.
Battery built into durable aluminum housing
Lightweight and compact
Automatic jumpstart feature
Automatic shut-off if no activity is recorded for 5 minutes
Automatic dimming feature if no buttons are pressed for 10 seconds (significantly saves battery capacity)
Comes with your choice of RCA connector or 3.5mm connector
Comes in black, pink, or red
TECHNICAL SPECIFICATIONS & KEY FEATURES
TECHNICAL SPECIFICATIONS
KEY FEATURES
PAGE 3
To turn on the Forge-C without the jumpstart feature, long-press the power button .
Your machine will start with previously adjusted voltage.
1
2
3
4When you’re ready to recharge, connect your Forge-C to a USB-C charging cable. You will also see your
battery capacity. *
To start or pause your machine, press the power button whenever you want.
A pedal icon will appear on your display when your machine is working.
To turn on the Forge-C with the jumpstart feature, quickly double press the power button .
A lightning bolt icon will appear on your display.
NOTE: *We highly recommend you charge your Forge-C using a 2Amp 5v adapter for optimal charging time.
HOW TO USE YOUR PEAK FORGE-C
USING YOUR PEAK FORGE-C BATTERY PACK
PAGE 4
FAULT CODES
This means there is a short somewhere. Take battery off and try with another direct
drive pen to see if error persists. If battery works on a new machine, that means the
original machine has an issue potentially with the motor. If the battery continues to
display E1, that means the battery will need to be replaced.
E1
SHORT CIRCUIT
This means overcurrent protection. Please open the machine and check to see if the
motor is stuck or the drive bar or motor is broken. If all appears to be working, please try
a softer membrane needle. An E2 error means there is an issue somewhere outside the
battery, and the battery is protecting itself by displaying the E2 error.
E2
OVER CURRENT
This means that the charging cord is faulty. Please change to a new cord and try
again.
E3
FAULTY CORD
WARRANTY INFORMATION
WARRANTY INFORMATION
PAGE 5
If you experience any technical issues or your Forge-C battery pack requires repairs, please contact our customer
service team at 410-712-0145. After our customer service team provides you with a return authorization, you can
download and fill out our Peak Repair Order Form:
Mail your completed repair order form, battery pack, and invoice as proof of purchase to 7410 Coca Cola Dr STE
108, Hanover, MD 21076. You can also direct any questions or concerns regarding issues with your Peak Forge-C
battery pack to info@peakneedles.com.
If you purchased your Forge-C less than a year ago, we will replace it with a brand new model. If your machine is
older than a year, it is unfortunately no longer protected under our one-year warranty.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Peak Needles ForgeC 3 User manual

ForgeC 3
Brand
Peak Needles
Model
ForgeC 3
Type
User manual

Peak Needles ForgeC 3 is a wireless power supply for tattoo machines, with a built-in 2000mAh battery that provides up to 10 hours of operation. It features an automatic jumpstart function for quick starts, and automatic shut-off after 5 minutes of inactivity to save battery. The voltage can be adjusted from 4V to 12V in 0.1V increments, and the current voltage is displayed on the screen. It comes with a USB-C charging cable and is available in black, pink, or red.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents