2. KING S RACK
  3. GT0918
GT0918

KING S RACK GT0918 User manual

  • Hello! I've reviewed the assembly instructions for the King's Rack Bin Rack. This document guides you through the steps of assembling the multi-tiered storage system using posts, beams, and connectors. I'm ready to answer your questions about the components and assembly process. The document includes detailed steps and diagrams for the assembly of the Bin Rack.
  • What are the two types of posts?
    How many bins are included?
    How many rails are included?
Bin Rack
Assembly Instructions
Step 1:
Connect the upper posts and the lower posts with post connectors.
-The upper post is the longer one while
the lower post is the shorter one.
Step 3:
Nut x 16
Screw x 16
Hex key x 1
Long beam x 2
“U” shape beam x 2
Mini long beam x 14
Plastic cap x 4
Particle board x 1
Short beam x 4
Rail x 48
Upper post x 4
Lower post x 4
Post Connector x 4
Bin x 24
(Longer post)
(Shorter post)
Step 1:
Set up a "Rectangle" by assembling 2 posts with 2 short beams.
- One beam at the top & another at the bottom.
- Place the rivets into the posts.
- Tap to seat the rivets.
Finish the framework.
- Mount 2 "U" shape beams to the " Rectangle".
Front "U" shape beam heading up to mount to the #2
& #3 hole. Rear "U" heading down to mount to the #1 & #2 hole.
- Place 2 posts to the other ends of the "U" shape beams.
- Connect the 2 posts by placing 1 short beam at the bottom
& another at the top.
- Connect the 2
"Rectangle"s with 2 long beams at the top.
#2
#3
#2
#1
x 1 x16 x16 x 4
x 4
x 4
Step 5
Mount the rails to the mini beams accordingly.
Step 6
Put the bins on the rails.
Step 7:
Place the wooden board on the top.
And now, the system is ready for use.
Step 4:
Set up the layers.
- Add the mini long beams to the post in parallel, at the #7, #12,#17,
#22,#27,#32 & #37 hole from the top.
- Leaving the space of 4 holes each tier for the bins.
- Let the
"V" shape slot heading down
at the front while heading up at the back.
#7
#12
#17
#22
#27
#32
#37
Space
of
4 holes
#7
#12
#17
#22
#27
#32
#37
x 48
/