TP-LINK TL-WN821N User manual

Brand: TP-LINK

Model: TL-WN821N

Type: User manual

This manual is also suitable for

300Mbps Wireless N USB Adapter TL-WN821N

TP-LINK TL-WN821N is a wireless USB adapter that enables users to connect their computers to a wireless network. It supports both Windows and Mac operating systems and can be easily installed using the included driver and utility. The adapter also features WPS (Wi-Fi Protected Setup), which allows users to quickly and easily connect to a secure wireless network without having to enter a password.

a. Download the driver and utility from this

product’s Support page at

www.tp-link.com.

Note:

If your computer has a CD drive, you can also run the

included CD to install the driver and utility.

b. Unzip the downloaded folder and run the

Install.pkg.

c. Follow the instructions to complete the

installation.

For Mac OS X

Uninstall.commandInstall.pkg

SHELL

Option 1: Via TP-Link Utility Option 2: Via Wi-Fi Protected Setup (WPS)

a. Click (TP-Link Utility) on the menu

bar.

b. Select your Wi-Fi network and enter the

Wi-Fi password when prompted.

a. Press the WPS button on your router.

b. Within 2 minutes, press and hold the WPS

button on the adapter until the WPS

progress window appears.

c. When the "WPS Protocol Finished!"

message appears, click OK.

300Mbps Wireless N

USB Adapter

MODEL NO. TL-WN821N

Quick Installation Guide

1 Connect to a Computer 2 Install Driver and Utility 3 Join a Wireless Network

WPS Progress Scan Active WPS AP

PIN PBC Cancel

WPS

Fri 5:14 PM

TP-Link_0903

TP-Link_

0210

TP-Link_0001

TP-Link_XXXX

Join Other Network...

WPS...

Open Wireless Utility...

USB-WiFi: On

Turn USB-WiFi Off

Option 1: Directly Option 2: Via the USB Extension Cable

Connections are available

Wireless Network Connection

Connect automatically

Connect

√

TP-Link_XXXX

c. When the "Success!" message appears, your

computer is connected to Wi-Fi.

For Windows

Option 1: Via Windows Wireless Utility

a. Click the network icon ( or ) on the

taskbar.

b. Select your Wi-Fi network, click Connect

and enter the password when prompted.

Option 2: Via WPS Tool

a. Press the WPS button on your router.

b. Within 2 minutes, press and hold the WPS

button on the adapter until WPS Tool opens.

This USB Adapter can only be powered by computers that comply with

Limited Power Source (LPS).

For detailed instructions, please refer to the

User Manual from this product’s Support

page at www.tp-link.com.

For technical support and other information,

please visit http://www.tp-link.com/support,

or simply scan the QR code.

7106507439 REV8.1.0

1 Connect to a Computer

3 Join a Wireless Network

2 Install Driver and WPS Tool

WPS

Cancel

WPS

Cancel

Option 1: Directly Option 2: Via the USB Extension Cable

a. Insert the CD and run the Autorun.exe.

Note:

You can also download the driver from this product’s

Support page at www.tp-link.com.

b. Select TL-WN821N and follow the

steps to install the driver and WPS Tool.

Note:

If you can’t install the driver successfully, disable the

antivirus software and firewall, then try again.

TL-WN821N

Note:

In Windows XP, a Found New Hardware Wizard window will appear when the adapter is detected. Please click Cancel.

TP-LINK TL-WN821N User manual

Brand: TP-LINK

Model: TL-WN821N

Type: User manual

This manual is also suitable for

300Mbps Wireless N USB Adapter TL-WN821N

Download PDF

report

TP-LINK TL-WN821N User manual

This manual is also suitable for

TP-LINK TL-WN821N User manual

Related papers

Other documents