TP-LINK TL-WN823N Mini USB Wireless WiFi network Adapter Installation guide

Brand: TP-LINK

Model: TL-WN823N Mini USB Wireless WiFi network Adapter

Type: Installation guide

a. Download the driver and utility from this

product’s Support page at

www.tp-link.com.

Note:

If your computer has a CD drive, you can also run the

included CD to install the driver and utility.

b. Unzip the downloaded folder and run the

Install.pkg.

c. Follow the instructions to complete the

installation.

For Mac OS X

Insert the adapter into a USB port on your

computer directly.

Install.pkg Uninstall.command

SHELL

Option 1: Via TP-Link Utility Option 2: Via Wi-Fi Protected Setup (WPS)

a. Click (TP-Link Utility) on the menu

bar.

b. Select your Wi-Fi network and enter the

Wi-Fi password when prompted.

a. Press the WPS button on your router.

b. Within 2 minutes, press and hold the WPS

button on the adapter until the WPS

progress window appears.

c. When the "WPS Protocol Finished!!"

message appears, click OK.

300Mbps Mini Wireless N

USB Adapter

MODEL NO. TL-WN823N

Quick Installation Guide 1 Connect to a Computer 2 Install Driver and Utility 3 Join a Wireless Network

WPS Progress Scan Active WPS AP

PIN PBC Cancel

WPS

Fri 5:14 PM

TP-Link_0903

TP-Link_0001

TP-Link_0002

TP-Link_XXXX

Join Other Network...

WPS...

Open Wireless Utility...

USB-WiFi: On

Turn USB-WiFi Off

a. Insert the CD and run the Autorun.exe.

Note:

You can also download the driver from this product’s

Support page at www.tp-link.com.

b. Select TL-WN823N and follow the

steps to install the driver and WPS Tool.

Note:

If you can’t install the driver successfully, disable the

antivirus software and firewall, then try again.

Connections are available

Wireless Network Connection

Connect automatically Connect

√

TP-Link_XXXX

c. When the "Success!" message appears, your

computer is connected to Wi-Fi.

For Windows

Insert the adapter into a USB port on your

computer directly.

Option 1: Via Windows Wireless Utility

a. Click the network icon ( or ) on the

taskbar.

b. Select your Wi-Fi network, click Connect

and enter the password when prompted.

Option 2: Via WPS Tool

a. Press the WPS button on your router.

b. Within 2 minutes, press and hold the WPS

button on the adapter until WPS Tool opens.

This USB Adapter can only be powered by computers that comply

with Limited Power Source (LPS).

For detailed instructions, please refer to the

User Manual from this product’s Support

page at www.tp-link.com.

For technical support and other information,

please visit http://www.tp-link.com/support,

or simply scan the QR code.

7106507545 REV5.1.0

TL-WN823N

1 Connect to a Computer 3 Join a Wireless Network

2 Install Driver and WPS Tool

Note:

In Windows XP, a Found New Hardware Wizard

window will appear when the adapter is detected.

Please click Cancel.

WPS

Cancel

WPS

Cancel

TP-LINK TL-WN823N Mini USB Wireless WiFi network Adapter Installation guide

TP-LINK TL-WN823N Mini USB Wireless WiFi network Adapter Installation guide

TP-LINK TL-WN823N Mini USB Wireless WiFi network Adapter Installation guide

Related papers

Other documents