Extron DVS 510 User manual

DVS 510
Extron
Brand
Extron
Model
DVS 510
Type
User manual
68-1290-30 Rev. A
05 11
Attention!
To enable IR control, send the Simple Instruction Set (SIS™) command 65*1#
using RS-232/RS-422 or Ethernet. The unit responds with IRDisable1].
IR reception is disabled on the DVS 510 Series by default.
Command ASCII Command Unit Response Additional Description
Enable IR receiver
65*1#
IRDisable1 ]
Enable the IR receiver.
Disable IR receiver
65*0#
IRDisable0 ]
Disable the IR receiver
(default).
View IR receiver status
65#
X1) ] For
X1)
: 0 = off; 1 = on
Set lock mode 1
1X
Exe 1 ]
Lock entire front panel.
Set lock mode 2
2X
Exe 2 ]
Allow only input
switching, PIP, volume
control, and Auto-Image.
Disable
0X
Exe 0 ]
Allow all front panel
adjustments.
View lock mode
X
X5( ] For
X5(
: 0 = disabled,
1 = mode 1, 2 = mode 2
www.extron.com
Other SIS commands for the DVS 510 and the DVS 510 SA include:
  • Page 1 1

Extron DVS 510 User manual

DVS 510
Extron
Brand
Extron
Model
DVS 510
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents