Vello FMA-D User manual

Brand: Vello

Model: FMA-D

Type: User manual

FLASH

MULTIPLIER

USER MANUAL

The Vello Flash Multiplier is the ideal tool to focus and concentrate your on-camera ﬂash so

you can extend the light over long distance when using lenses of 300 mm or greater. This

helps when you’re out shooting wildlife, like birds in tree tops, and need proper illumination

without getting too close. Enjoy a portable, easy-to-set-up ﬂash accessory that helps extend

battery life and works with TTL metering to deliver up to three extra f-stops.

This is a magnifying lens!

Looking at direct sunlight through the fresnel lens, or pointing the ﬂash multiplier directly

into your subject’s eyes at close distance, may result in damage to the eyes.

Always remove or cover this lens when not in use.

All images are for illustrative purposes only.

THANK YOU FOR CHOOSING VELLO

WARNING!

• Flash Multiplier

• Flash Multiplier sleeve

• Universal ﬂash ring holder

• Fresnel lens

• Lens sleeve

• Diuser

• Zippered carrying case

• User manual

BOX CONTENTS

SPECIFICATIONS

Dimensions (H × W × D) 5.5 × 7.8 × 6.65 in. (13.9 × 19.9 × 16.9 cm) assembled

Weight 4.5 oz. (128 g) without ﬂash adapter ring

Flash Adapter Rings (sold separately)

• FMA-N910

for Nikon SB900 series

• FMA-C600

for Canon 600 series

• FMA-C580

for Canon 580 series

• FMA-LG

for large ﬂashes (49 × 78 mm)

 Canon 540EZ

 Pentax AF-540

 Nissin Di622

 Sony HVL-F58AM

 Canon 340EX

 Canon 420EX

 Canon 430EX

 Sony HVL-F42AM

 Metz 47 AF-1

 Metz 52 AF-1

• FMA-SM

for small ﬂashes (38 × 78 mm)

USER INSTRUCTIONS

1. Align both gray touch-fastener

strips on the Flash Multiplier

and the universal ﬂash ring

holder. Make sure the ring

holder’s white dots are facing

you. The gray side will be on

top when mounted on your

ﬂash.

2. Pull the opposite end to the

holder, followed by the two

sides, and press their touch-

fastener strips together

3. Fold over the touch-fastener

ﬂaps, and press to secure.

4. Slide the ﬂash adapter ring

onto your ﬂash head, with

the arrow to the left. For

the FMA-LG and FMA-SM

adapters, make sure the edge

of the head is ﬂush with inside

pads of the adapter.

5. Align the arrow of the adapter

ring with the ﬁrst white dot

on the holder as shown.

6. Seat the adapter ring into the

holder, and rotate clockwise

until the arrow aligns with the

second white dot and locks

in place.

7. Remove the Fresnel lens from

its sleeve, and line up the

lens’s touch-fastener strips

with the strips on the front

of the Flash Multiplier. Press

in place.

Note: For best results, set the ﬂash-

head distance to 50 mm or greater.

To use the Flash Multiplier as

a softbox, remove the Fresnel

lens and attach the diuser.

This VELLO product is warranted to the original purchaser to be free from defects in materials and workmanship under normal

consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever

occurs later. The warranty provider’s responsibility with respect to this limited warranty shall be limited solely to repair or

replacement, at the provider’s discretion, of any product that fails during normal use of this product in its intended manner and

in its intended environment. Inoperability of the product or part(s) shall be determined by the warranty provider. If the product

has been discontinued, the warranty provider reserves the right to replace it with a model of equivalent quality and function.

This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper installation

or maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS

WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you with speciﬁc legal rights, and

you may also have additional rights that vary from state to state.

To obtain warranty coverage, contact the Vello Customer Service Department to obtain a return merchandise authorization

(“RMA”) number, and return the defective product to Vello along with the RMA number and proof of purchase. Shipment of the

defective product is at the purchaser’s own risk and expense.

For more information or to arrange service, visit www.vellogear.com or call Customer Service at 212-594-2353.

Product warranty provided by the Gradus Group.

www.gradusgroup.com

VELLO is a registered trademark of the Gradus Group.

vellogear.com GG2

ONE-YEAR LIMITED WARRANTY

Vello FMA-D User manual

Vello FMA-D User manual

Related papers

Other documents