LENS HOOD
www.vellogear.com
THANK YOU FOR CHOOSING VELLO
This Vello dedicated lens hood is
custom-tailored to your camera’s lens.
The lens hood mounts directly to your
lens and accommodates its exact angle
of view. It prevents glare and lens flare
by blocking stray light. It also adds
shock absorption to help protect your
lens from impact damage.
Please read the instructions on the other
side of this card before mounting the Vello
dedicated lens hood.
MOUNTING THE VELLO
LENS HOOD
1. Remove the front cap from your lens.
2. Remove your lens’ front lens adapter
ring by rotating the adapter ring
counterclockwise. (See illustration.)
3. Align the Vello lens hood’s bayonet
mount with your lens.
4. Mount the Vello lens hood onto
your lens and rotate the lens hood
clockwise until it locks into place.
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Vello LHC-ET65III Compatibility Chart
-
Vello RM-CEF User manual
-
-
-
-
-
-
-
-