aspenhome I248HOGRP1a Assembly Instructions

aspenhome
Brand
aspenhome
Model
I248HOGRP1a
Type
Assembly Instructions

This manual is also suitable for

aspenhome I248HOGRP1a is a versatile workstation that combines a single pedestal desk and a 48" return desk, providing ample space for your work essentials and maximizing your productivity. With its sturdy construction and functional design, this workstation is built to withstand the demands of daily use and enhance your work experience.

The single pedestal desk features a spacious work surface, a lockable file drawer for secure storage of important documents, and a convenient flip-down keyboard tray for a more ergonomic typing position. The 48" return desk offers additional workspace and can be configured to meet your specific needs, providing ample room for multiple monitors, paperwork, and other office supplies.

aspenhome I248HOGRP1a is a versatile workstation that combines a single pedestal desk and a 48" return desk, providing ample space for your work essentials and maximizing your productivity. With its sturdy construction and functional design, this workstation is built to withstand the demands of daily use and enhance your work experience.

The single pedestal desk features a spacious work surface, a lockable file drawer for secure storage of important documents, and a convenient flip-down keyboard tray for a more ergonomic typing position. The 48" return desk offers additional workspace and can be configured to meet your specific needs, providing ample room for multiple monitors, paperwork, and other office supplies.

Page 1/5
ITEM NO: I248-307-1/307-SLT-1 Single Ped Desk
I248-308-1/308-SLT-1 48"Return Desk
Thank you for purchasing this quality product. Be sure to check all packing material carefully for
small parts that may come loose inside the carton during shipment.
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
BEFORE USING THIS PRODUCT PLEASE READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS.
Save these instructions for future reference.
FOR INDOOR USE ONLY
HARDWARE LIST: I248-307-1/307-SLT-1
1 PC
No.
B
C
D
E
Description Sketch Quantity
Bolt Ø1/4" x 1-3/8"
Lock Washer Ø1/4"
Flat Washer Ø1/4" x 3/4"
Allen Wrench 4mm
8 PCS
10 PCS
A
COMPONENTS LIST: I248-307-1/307-SLT-1
No.
1Description Sketch Quantity
Desk Top
2 Pedestal
31 PC
1 PC
41 PC
1 PC Back Stretcher
End Panel
I248-307-1
I248-308-1
Bolt Ø1/4" x 3/4" 2 PCS
10 PCS
HARDWARE LIST: I248-308-1/308-SLT-1
1 PC
No.
G
H
I
J
Description Sketch Quantity
Bolt Ø1/4" x 1-3/8"
Lock Washer Ø1/4"
Flat Washer Ø1/4" x 3/4"
Allen Wrench 4mm
3 PCS
F
COMPONENTS LIST: I248-308-1/308-SLT-1
No.
1Description Sketch Quantity
Return Desk Top
2 Pedestal 1 PC
1 PC
Bolt Ø1/4" x 3/4" 6 PCS
9 PCS
9 PCS
1 PC
K Metal Plate
I248-307-1
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
For Option 1 For Option 2
06-28-2022
D
C
A
E
Desk Top
STEP 3: Fully extend the top right drawer and attach the end panel to the table top by using 4 bolts(A), lock
washers(C) and flat washers(D). Do not completely tighten bolts.
DCAE
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
Page 2/5
STEP 1:Remove the drawers from the pedestal: Fully extend the drawer, then press the plastic tab down on the right
and up on the left at the same time as shown below. While holding the tabs pressed down/up, pull the drawer out.
Plastic Tab
STEP 2: Put the desk top face down on a soft surface, attach the pedestal on the table top by using 4 bolts(A), lock
washers(C) and flat washers(D) as shown below. Then use an allen wrench to tighten all the bolts.
For option 1
ITEM NO: I248-307-1/307-SLT-1 Single Ped Desk
I248-308-1/308-SLT-1 48"Return Desk
End Panel
Top Right Drawer
Pedestal
03-22-2022
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
STEP 4: Attach the back stretcher to the pedestal and
end panel by using 2 bolts(B), lock washers(C) and
flat washers(D). Completely tighten all bolts. Push
back the top right drawer. Turn the assembled desk
to the upright position.
STEP 5: Replace all of the drawers in pedestal: Fully extend
the slides from the case. Then align the slides on the drawer to
the slides on the case as shown. Push the drawer back in. You
may have to slide the drawer in and out several times in order
to properly align the ball bearings.
FUNCTIONALITY INSTRUCTION
Adjust the leveler
when necessary
Leveler on legs
Locking file drawer hold
letter or legal size files
Flip down keyboard tray
B
C
DE
Press here to release
Hook latch
Metal plate
Page 3/5
Keys for file lock.
Do not trash.
Remove the wood screws on
the back panels of drawer box
to remove the rod loops and
file rods if necessary.
For Option 1
ITEM NO: I248-307-1/307-SLT-1 Single Ped Desk
I248-308-1/308-SLT-1 48"Return Desk
Back Stretcher
End Panel
03-22-2022
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
STEP 3: Remove the top right drawer at the single pedestal desk by the same way as the STEP 1 of page 2.
I
H
G
J
STEP 4: Attach the assembled return desk to the ped desk by using 3 bolts(G), lock washers(H) and
flat washers(I). Completely tighten all bolts.
Page 4/5
STEP 1: Put the return desk top face down on a soft surface.
STEP 2-1: Attach the pedestal on the table top by using 3 bolts(F), lock washers(H) and flat washers(I)
as shown below. Then use an allen wrench to tighten all the bolts.
STEP 2-2: Attach the metal plate on the return table top by using 3 bolts(G), lock washers(H) and flat
washers(I) as shown below. Do not completely tighten bolts.
For option 2
I
H
F
J
I
H
G
J
ITEM NO: I248-307-1/307-SLT-1 Single Ped Desk
I248-308-1/308-SLT-1 48"Return Desk
Return Desk Top
Metal Plate
Pedestal
03-22-2022
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
FUNCTIONALITY INSTRUCTION
Adjust the leveler
when necessary
Leveler on legs
Page 5/5
Lift Top
For Option 2
ITEM NO: I248-307-1/307-SLT-1 Single Ped Desk
I248-308-1/308-SLT-1 48"Return Desk
03-22-2022
STEP 1: Put the hutch on the desk top.
Take off one screw from each metal
plate on the back of hutch and swing it
in an ideal location as shown below.
Then re-secure the metal plate with
screws to desk.
Page 1/1
Thank you for purchasing this quality product. Be sure to check all packing material carefully for
small parts that may come loose inside the carton during shipment.
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
BEFORE USING THIS PRODUCT PLEASE READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS.
Save these instructions for future reference.
FOR INDOOR USE ONLY
FUNCTIONALITY INSTRUCTION
06-27-2022
ITEM NO: I248-307H-1/307H-SLT-1 Single Ped Desk Hutch
Adjust the leveler
when necessary
Leveler on legs
I248-307H-1
I248-307-1 Tablet Holders
Tablet Holders
I248-307H-1
I248-307H-1
I248-307-1
I248-308-1
I248-307-1
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

aspenhome I248HOGRP1a Assembly Instructions

aspenhome
Brand
aspenhome
Model
I248HOGRP1a
Type
Assembly Instructions
This manual is also suitable for

aspenhome I248HOGRP1a is a versatile workstation that combines a single pedestal desk and a 48" return desk, providing ample space for your work essentials and maximizing your productivity. With its sturdy construction and functional design, this workstation is built to withstand the demands of daily use and enhance your work experience.

The single pedestal desk features a spacious work surface, a lockable file drawer for secure storage of important documents, and a convenient flip-down keyboard tray for a more ergonomic typing position. The 48" return desk offers additional workspace and can be configured to meet your specific needs, providing ample room for multiple monitors, paperwork, and other office supplies.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents