V-ZUG 31002 Installation guide

31002
V-ZUG
Brand
V-ZUG
Model
31002
Type
Installation guide

V-ZUG 31002 induction glass ceramic hob offers precise temperature control for efficient cooking. With its sleek design and easy-to-use interface, you can cook your favorite meals with ease. Enjoy the convenience of induction cooking, which provides fast and even heat distribution, saving you time and energy in the kitchen.

V-ZUG 31002 induction glass ceramic hob offers precise temperature control for efficient cooking. With its sleek design and easy-to-use interface, you can cook your favorite meals with ease. Enjoy the convenience of induction cooking, which provides fast and even heat distribution, saving you time and energy in the kitchen.

Installation instructions
Induction glass ceramic hob
With normal mounting frame
J970.113-3
9.7.14
1
These installation instructions apply to the models: 009 (GK46TIXSC), 970 (GK46TIXC), 31002 (GK46TIMXSC), 31003 (GK46IMXDC)
Identification plate
The identification plate is next to the connection plate.
A Affix the second identification plate (enclosed) in an accessible position behind the
front of the fitted cabinet beneath the appliance.
A Refer to the identification plate for specifications for the required mains voltage, current type and fuses.
A Application height of the appliance: up to max. 2000 m above sea level
A The appliance is equipped with a mains cable that should be connected to a distribution box by the customer.
Error message U400
The appliance should be installed by qualified personnel only. Each step must be carried out and checked in full in the order
specified.
Validity
General notes
If fitting in flammable material, the guidelines and standards for low voltage installations and for the fire protection must be
strictly observed.
Accessories
Designation Art. no.
Ventilation protective plate set
For niche width 550 mm
For niche width 600 mm
H6.1082
H6.1083
Electrical connections
Electrical connections must made by trained electricians in accordance with the guidelines and standards for low voltage
installations and the specifications of the local electricity supply companies.
A plug-in appliance may only be connected to a socket outlet with earthing contact, installed according to specifications. An
all-pole mains isolating device with 3 mm contact opening should be provided in the house wiring system. Switches, plug and
socket devices, circuit breakers and fusible cut-outs which are accessible after installation and which have all-poles switching
are permissible as isolating devices. Effective earthing and separately installed neutral and earth conductors ensure safe and
fault-free operation. After installation, live parts and cables with basic insulation must not be accessible. Old installations should
always be checked.
Incorrect connection:
A pole conductor was connected to the connecting terminal for neutral conductors.
Quickly disconnect the appliance from the mains!
Identification plate
Connection plate
600/550
Installation pipe Distribution box
Clamp
brown + black
blue
yellow/green
black
blue
yellow/green
brown
L2
L1
N
N
L1
PE/
PE/
400 V 2N~
230 V~
Installation instructions
Induction glass ceramic hob
With normal mounting frame
J970.113-3
9.7.14
2
Indications
• The work surface has to be flat.
• In order to guarantee good ventilation, there needs to be a space of at least 17.5 mm height beneath the appliance.
Installing
The layout of the cooking zones on the integrated hob may differ from the illustrated hob!
1. Cut out mounting cut-out precisely.
2. Carefully place the appliance in the mounting cut-out and press against the work surface with sufficient overlap.
Installation
70
4
60
0/55
0
51
4
680
±
1
min.
5
0
490 ±1
=
=
(30)
60
0
=
=
Cable length 1.7 m
48
from level
aim for
max. R10
For symmetrical fitting, it is
not necessary to cut out
the side walls.
Installation instructions
Induction glass ceramic hob
With normal mounting frame
J970.113-3
9.7.14
3
Cool air supply if installed over a drawer or cabinet
In order to guarantee good ventilation, there needs to be a space of at least 17.5 mm height beneath the appliance.
Installing the protective plate with a 3 mm ventilation gap at the front (see ’Accessories’)
A protective plate is necessary for the adequate ventilation of the hob.
The distance between the underside of the appliance and the protective plate must be at least 17.5 mm.
A protective plate cannot be installed with induction hobs that have dial controls.
Min. 25 cm²
Air gap over the entire cabinet element width
max. 60
Drawer
Centre of fan
min. 15
min. 5
min. 50,9
min. 30
min. 65,9
Necessary space for the ventilation
below the worktop required
600/550
min. 240 min. 245
55.5
Caution:
Do not put mains cable
near protective plate
Well-fitting seal over
width of cabinet element
Min. 25 cm²
air gap over
the entire cabinet element width
min. 3
(30)
min. 67.5
5..10
m
a
x
. 0
.5
2.5
56
according
to template
393
ø4
Drawer
Fan
min. 15
(19.5)
48
  • Page 1 1
  • Page 2 2
  • Page 3 3

V-ZUG 31002 Installation guide

31002
V-ZUG
Brand
V-ZUG
Model
31002
Type
Installation guide

V-ZUG 31002 induction glass ceramic hob offers precise temperature control for efficient cooking. With its sleek design and easy-to-use interface, you can cook your favorite meals with ease. Enjoy the convenience of induction cooking, which provides fast and even heat distribution, saving you time and energy in the kitchen.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents