Assembly Instructions
Assembly Instructions
Stage 2 – Fitting the Top PanelStage 1 – Fitting the Side Panels
fig. 1
fig. 3
Side Rail
fig. 4
fig. 2
1. Insert Top Side Panel A onto the
top of the Bottom Side Panel B.
See fig. 1.
2. Use Screws A and Nuts B to fix
the unit.
See fig. 2.
NOTE: Ensure you fit the Screws
to the opposite side of the side
rails.
3. Use the same method as in fig.
1-2 to fix the other Side Panel.
1. Stand the Side Panel up and
assemble the Wire Shelf
C onto the side with the rails.
See fig. 3.
2. Place the other Side Panel onto
the Wire Shelf.
See fig. 4.
NOTE: Make sure that both the
side rails are facing inwards.
NOTE: Make sure that the side rails
are facing inwards.
NOTE: Ensure the side rails on
Top Side Panel A and Bottom
Side Panel B are aligned on
the same side.
A
B
C
A
B
B