Resolution‐EASEExportFunction:Step‐By‐StepTutorial
EasternAcousticWorks Page8of8 Updated2/5/2013
SpeakerBasewillsavethedataasan.SPKfile,andwillalsoincludeseveralotherfilessharingthename
butusingdifferentextensions(.spk,.fed,.ffc,.frd,.fvt,.fwm,and.lob).Itis
criticalthatallofthesefiles
arekepttogether.
You can now utilize the exported model in any EASE simulation, just as you would any other
loudspeaker. Remember that the loudspeaker (representing your array) should be positioned in the
model at the pick point (asindicated in Resolution ). While any
up‐ or down‐tiltwill be included in the
dataexportedfromResolution(theEASEobjectshouldbeleftat0degreesvertical),itwillbenecessary
tohorizontallyaimthearraywithinEASEasappropriate.
(Endofdocument)