2. Home
  3. Domestic appliances
  4. Large home appliances
  5. Washing machines
  6. AEG
  7. L98696FL
L98696FL

AEG L98696FL, L99699FL Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the AEG L98696FL Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What is the maximum load capacity of this washing machine?
    How do I set the temperature for a washing cycle?
    What is the Rinse Hold function?
    How do I activate the child lock?
    How do I clean the detergent dispenser?
2 3 4 65 81 7
The On/Off button with
AUTO OFF function
The AUTO OFF function
automatically deactivates the
appliance to stop energy
consumption:
• Before you press Start/Pause
button, if you do not use the
appliance for about five
minutes. Press On/Off button
to activate it again. All settings
are cancelled.
• After 5 minutes from the end
of the washing programme.
Once activated the appliance
again, the display shows the
end of the washing programme.
Flap for powder or liquid detergent
Compartment for the stain remover
Liquid additives compartment
Compartment for the wash phase
Compartment for prewash and soak phase
The detergent dispenser
1. Detergent dispenser
2. On/Off button
3. Programme knob
4. Display
5. Options
6. Steam button
7. Memory buttons
8. Start/Pause button
For more information please always refer to the user manual.
Before you activate the appliance read the Safety Information chapter in the user manual.
QUICK USER’S GUIDE
AB
C
G
F DE
INTERACTIVE DISPLAY
With this special device, already during loading, the appliance shows the real
washing programme duration and the correct quantity of detergent to put for
each type and amount of laundry.
Since a small load may need less than half time of a full load, every time you
use the appliance you will appreciate the usefulness of the weight sensor and
its instant time calculation.
If you put more laundry than the maximum load, the symbol flashes. You can
wash your laundry anyway but the energy and water consumption increase.
In any case the overload indication is available only for programmes
with a maximum load lower than the appliance maximum load.
The appliance adjusts automatically the washing programme time to the
laundry you have put in the drum to have PERFECT washing results in the
minimum necessary time. The dot flashes .
After approximately 15 minutes from the start of the programme, the display
shows the new time value. The dot stops to flash .
The OPTISENSE wash The Weight Sensor
A The message area shows
The programme name, the option name, useful messages
about the appliance use and possible malfunction messages
B The digit area shows
The time of the day
Alternately washing programme duration and the time of
programme end
Delay/Start set
The end of programme ( )
C The weight sensor area shows
With the door opened:
The maximum load for each programme ( )
The weight of the laundry that you put in the drum ( )
The indicator bar that fills accordingly to the laundry load
With the door closed:
The message area A shows the percentage of the detergent to use
D TIME SAVE
The symbol comes on when you set one of these functions:
Shortened duration
Extra quick
E FUNCTIONS
When you set one of these functions the relative symbol goes on.
F The spin speed value, No Spin and Rinse Hold function
G The temperature value
Indicator bars:
The empty indicator bars come on when the related fuctions are available
with the set programme. In setting mode they fill accordingly to the
function availability.
SOAK
PREWASH
STAIN
EXTRA RINSE
The simple and logic display gives immediately all the information about the washing programme
START THE APPLIANCE
1 Open the water tap.
2 Connect the mains plug to the mains socket.
3 Press On/Off button to activate the appliance.
ALWAYS ACTIVATE THE APPLIANCE BEFORE LOADING
THE LAUNDRY INTO THE DRUM.
4 Turn the programme knob to set a programme. The programme
indicator goes on.
5 The display shows the default temeprature, maximum spin speed
and the empty indicator bar of the available functions. To change
the default values or to set functions press the corresponding
buttons.
6 If necessary, set the delay start function.
7 Put the laundry in the drum, one item at a time.
8 The weight sensor shows the maximum load available ( ) and
your laundry load ( ). The weight of the laundry updates by step
of 0.5 kg.
9 Do not overload the appliance.
10 Close the door.
11 The text bar on the display (A) tells the percentage of detergent to
use. To have PERFECT washing results with MINIMUM energy and
water consumption follow this suggestion.
12 Put the detergent and additives in the correct compartment of the
dispenser.
13 Press Start/Pause button to start the programme.
14 At the end of the programme the display shows a zero and the
message tells that the washing programme is completed. If you set
the Rinse Hold function refer to “At the end of the programme”
chapter in the user manual.
Daily Use with weight sensor
LANGUAGE SETTING
The first time you activate the appliance, the display shows the default
language and tells you to confirm it or change it:
1 Turn the programme knob to set the desired language.
2 When the display shows the necessary language, press Start/Pause
button to confirm the selection.
To change the language of the display AFTER first activation:
1 Press Spin and Options buttons at the same time for some
seconds to activate the language set mode.
2 Do again the previous 2 steps to set the new language.
CLOCK SETTING
After you set the language, the display tells to set the clock:
1 The hour digits flash.
2 Turn the programme knob to change the hour.
3 Press Start/Pause button to confirm the selection.
4 The minute digits flash.
5 Turn the programme knob to change the minutes.
6 Press Start/Pause button to confirm the selection.
To change the clock of the display AFTER first activation:
1 Press Extra Rinse and Time Save buttons at the same time for
some seconds to acitvate the clock set mode.
2 Do again the previous 6 steps to set the new time.
Before First Use
Programme Temperature Type of load Functions
Cottons
For each programmes the display shows all the available functions.
In case of incorrect selection, the display tells that the selection is not possible.
Extra Silent
Synthetics
Easy Iron
Delicates
Wool/Silk
Duvet
Anti Allergy
Spin/Drain (all fabrics)
Rinse
Outdoor
20min - 3 kg
Super Eco
Cottons Eco
Steam - Refresh
Steam - Anticrease
95º - Cold
95º - Cold
60º - Cold
60º - Cold
40º - Cold
40º - Cold
60º - 30º
60º
/
/
40º - Cold
40º - 30º
Cold
60º - 40º
/
/
White and coloured cotton items
White and coloured cotton items
Synthetic or mixed fabric items
Synthetic items
Delicate fabrics as acrylics, viscose, polyester items
Machine washable wool and delicate fabrics with “hand washing”
care symbol
One synthetic blanket, duvet, bedspread and so on
White cotton items
The maximum load of the laundry is related to the type of laundry
All fabrics
Waterproof, sports and outdoor clothing. Do not use any fabric softener!
Quick wash of sport items or cotton and synthetic items
Mixed fabrics (cotton and synthetic items)
White and fast coloured cotton items
Cotton and synthetic items that need to remove odour
Cotton and synthetic items that need to dewrinkle
PROGRAMMES
132906490-A-102014
/