AEG L99699FL Quick User Manual

Brand: AEG

Model: L99699FL

Category: Washing machines

Type: Quick User Manual

AEG L99699FL offers a variety of features to make laundry day easier. With its intelligent weight sensor, it adjusts the program time and detergent dosage based on the load, saving energy and water. The Time Save option allows for quicker washes, while the Delay Start function lets you preset the start time of your wash cycle. For delicate fabrics, the Wool/Silk program provides a gentle wash, and the Outdoor program is perfect for waterproof clothing and sportswear. The Steam Refresh and Steam Anticrease programs remove odors and wrinkles from clothes without the need for a full wash.

2 3 4 65 81 7

The On/Off button with

AUTO OFF function

The AUTO OFF function

automatically deactivates the

appliance to stop energy

consumption:

• Before you press Start/Pause

button, if you do not use the

appliance for about ﬁve

minutes. Press On/Off button

to activate it again. All settings

are cancelled.

• After 5 minutes from the end

of the washing programme.

Once activated the appliance

again, the display shows the

end of the washing programme.

Flap for powder or liquid detergent

Compartment for the stain remover

Liquid additives compartment

Compartment for the wash phase

Compartment for prewash and soak phase

The detergent dispenser

1. Detergent dispenser

2. On/Off button

3. Programme knob

4. Display

5. Options

6. Steam button

7. Memory buttons

8. Start/Pause button

For more information please always refer to the user manual.

Before you activate the appliance read the Safety Information chapter in the user manual.

QUICK USER’S GUIDE

F DE

INTERACTIVE DISPLAY

With this special device, already during loading, the appliance shows the real

washing programme duration and the correct quantity of detergent to put for

each type and amount of laundry.

Since a small load may need less than half time of a full load, every time you

use the appliance you will appreciate the usefulness of the weight sensor and

its instant time calculation.

If you put more laundry than the maximum load, the symbol ﬂashes. You can

wash your laundry anyway but the energy and water consumption increase.

In any case the overload indication is available only for programmes

with a maximum load lower than the appliance maximum load.

The appliance adjusts automatically the washing programme time to the

laundry you have put in the drum to have PERFECT washing results in the

minimum necessary time. The dot ﬂashes .

After approximately 15 minutes from the start of the programme, the display

shows the new time value. The dot stops to ﬂash .

The OPTISENSE wash The Weight Sensor

A The message area shows

The programme name, the option name, useful messages

about the appliance use and possible malfunction messages

B The digit area shows

The time of the day

Alternately washing programme duration and the time of

programme end

Delay/Start set

The end of programme ( )

C The weight sensor area shows

With the door opened:

The maximum load for each programme ( )

The weight of the laundry that you put in the drum ( )

The indicator bar that ﬁlls accordingly to the laundry load

With the door closed:

The message area A shows the percentage of the detergent to use

D TIME SAVE

The symbol comes on when you set one of these functions:

Shortened duration

Extra quick

E FUNCTIONS

When you set one of these functions the relative symbol goes on.

F The spin speed value, No Spin and Rinse Hold function

G The temperature value

Indicator bars:

The empty indicator bars come on when the related fuctions are available

with the set programme. In setting mode they ﬁll accordingly to the

function availability.

SOAK

PREWASH

STAIN

EXTRA RINSE

The simple and logic display gives immediately all the information about the washing programme

START THE APPLIANCE

1 Open the water tap.

2 Connect the mains plug to the mains socket.

3 Press On/Off button to activate the appliance.

ALWAYS ACTIVATE THE APPLIANCE BEFORE LOADING

THE LAUNDRY INTO THE DRUM.

4 Turn the programme knob to set a programme. The programme

indicator goes on.

5 The display shows the default temeprature, maximum spin speed

and the empty indicator bar of the available functions. To change

the default values or to set functions press the corresponding

buttons.

6 If necessary, set the delay start function.

7 Put the laundry in the drum, one item at a time.

8 The weight sensor shows the maximum load available ( ) and

your laundry load ( ). The weight of the laundry updates by step

of 0.5 kg.

9 Do not overload the appliance.

10 Close the door.

11 The text bar on the display (A) tells the percentage of detergent to

use. To have PERFECT washing results with MINIMUM energy and

water consumption follow this suggestion.

12 Put the detergent and additives in the correct compartment of the

dispenser.

13 Press Start/Pause button to start the programme.

14 At the end of the programme the display shows a zero and the

message tells that the washing programme is completed. If you set

the Rinse Hold function refer to “At the end of the programme”

chapter in the user manual.

Daily Use with weight sensor

LANGUAGE SETTING

The ﬁrst time you activate the appliance, the display shows the default

language and tells you to conﬁrm it or change it:

1 Turn the programme knob to set the desired language.

2 When the display shows the necessary language, press Start/Pause

button to conﬁrm the selection.

To change the language of the display AFTER ﬁrst activation:

1 Press Spin and Options buttons at the same time for some

seconds to activate the language set mode.

2 Do again the previous 2 steps to set the new language.

CLOCK SETTING

After you set the language, the display tells to set the clock:

1 The hour digits ﬂash.

2 Turn the programme knob to change the hour.

3 Press Start/Pause button to conﬁrm the selection.

4 The minute digits ﬂash.

5 Turn the programme knob to change the minutes.

6 Press Start/Pause button to conﬁrm the selection.

To change the clock of the display AFTER ﬁrst activation:

1 Press Extra Rinse and Time Save buttons at the same time for

some seconds to acitvate the clock set mode.

2 Do again the previous 6 steps to set the new time.

Before First Use

Programme Temperature Type of load Functions

Cottons

For each programmes the display shows all the available functions.

In case of incorrect selection, the display tells that the selection is not possible.

Extra Silent

Synthetics

Easy Iron

Delicates

Wool/Silk

Duvet

Anti Allergy

Spin/Drain

Rinse

Outdoor

20min - 3 kg

Super Eco 30° 30

Cottons Eco

Steam - Refresh

Steam - Anticrease

95º - Cold

60º - Cold

40º - Cold

60º - 30º

60º

40º - Cold

40º - 30º

° - Cold

60º - 40º

White and coloured cotton items

Synthetic or mixed fabric items

Synthetic items

Delicate fabrics as acrylics, viscose, polyester items

Machine washable wool and delicate fabrics with “hand washing”

care symbol

One synthetic blanket, duvet, bedspread and so on

White cotton items

The maximum load of the laundry is related to the type of laundry.

All fabrics, except woollens and very delicate fabrics.

Waterproof, sports and outdoor clothing. Do not use any fabric softener!

Quick wash of sport items or cotton and synthetic items

Mixed fabrics (cotton and synthetic items)

White and fast coloured cotton items

Cotton and synthetic items that need to remove odour

Cotton and synthetic items that need to dewrinkle

PROGRAMMES

132900611-A-502015

AEG L99699FL Quick User Manual

Brand: AEG

Model: L99699FL

Category: Washing machines

Type: Quick User Manual

Download PDF

report

AEG L99699FL Quick User Manual

AEG L99699FL Quick User Manual

Related papers

Other documents