NEO Coolcam SB-TWC360 User manual

Brand
NEO Coolcam
Model
SB-TWC360
Category
Security cameras
Type
User manual

This manual is also suitable for

ank you for purchasing from SafetyBasement.com! We appreciate
your business.
We made this simple manual to help you enjoy your new product as
quickly and easily as possible.
Be sure to check the TECH SUPPORT tab on your product page at
SafetyBasement.com for the latest available manual.
INSTRUCTION MANUAL
Revised: June 28, 2013
Neo Coolcam IP Camera
Page 2
PRODUCT MANUAL NEOCAM Wireless PTZ Camera : SB-TWC360
www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524
PRODUCT REFERENCE
IR BULBS
POWER
CONNECTOR
FOCUS RING
CAMERA
LENSE
EXTERNAL
SPEAKER
CONNECTOR
LIGHT SENSOR
EXTERNAL
ALARM
CONNECTORS
WIFI ANTENNA
CONNECTOR
ETHERNET
CONNECTION
Page 3
PRODUCT MANUAL NEOCAM Wireless PTZ Camera : SB-TWC360
www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524
ank you for purchase this IP camera. With it, you will be able to check in on the area it is
monitoring using the Internet and your smartphone.
ese instructions cover the basic setup and use of this product and should be followed
carefully.
Please note: setting up and IP camera does require some basic knowledge of your router and
home network for proper operation. is manual will cover the basics, but there are many
dierent router and network setups, so your particular setup may dier from the examples in
this manual.
THE PROCESS
To set up your camera, we will do the following;
1. Gather information about your network.
2. Connect the camera with an ethernet cable for setup.
3. Adjust settings on the camera.
4. Test your settings
5. Make the camera wireless
6. Accessing the camera through the internet
7. Accessing the camera with a smartphone app
PREPARATION
To properly set up your IP camera, you will need access to your WIFI network and your router.
A secure WIFI network requires the proper settings and password to allow a device to work on
it. You will need your password to make your camera wireless.
Access to your router may be required to let you access your camera from the internet. You will
need your router user name and password to make some basic changes to your router to allow
access. We will show some general steps in this manual on router changes.
Your camera set up requires some soware that you will nd on our website. Go to the product
page, and to the TECH SUPPORT area. Please download any les located here.
FOCUS RING
INTRODUCTION
Page 4
PRODUCT MANUAL NEOCAM Wireless PTZ Camera : SB-TWC360
www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524
Please write down the info you gather on this page for your reference.
1 Router Name:
2 Router Password:
3 Router Address:
4Subnet Mask
5 DNS Server
6 Camera Address
7Http Port
8Network Name
9 Network Security Type
10 Network Password
11 My IP Address
(IPChicken.com)
12 Camera Admin Name
13 Camera Admin
Password
SET UP INFORMATION
Page 5
PRODUCT MANUAL NEOCAM Wireless PTZ Camera : SB-TWC360
www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524
Each device on your network has a unique address, called an IP Address. ese addresses allow
the devices to talk to the network. Your PC has an IP Address, your router has one, and your
camera will have one. Each address must be unique. ey can look like this: 192.168.0.13. It is
possible that your IP address uses dierent numbers than what is shown. at’s okay. Just keep
notes on the page provided.
First, we’re going to get the address of your network. Just look, don’t make any changes.
On your Windows PC, go to START. en CONTROL PANEL.
Click on VIEW NETWORK STATUS.
INFO : YOUR IP ADDRESS
Page 6
PRODUCT MANUAL NEOCAM Wireless PTZ Camera : SB-TWC360
www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524
Your screen may look a little dierent, depending on your network setup and your version of
Windows.
Click on your CONNECTION. is will bring up information about your connection.
INFO : YOUR IP ADDRESS
Page 7
PRODUCT MANUAL NEOCAM Wireless PTZ Camera : SB-TWC360
www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524
Now, click on DETAILS. is is where we’ll get the information we need.
INFO : YOUR IP ADDRESS
Page 8
PRODUCT MANUAL NEOCAM Wireless PTZ Camera : SB-TWC360
www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524
You can see your PC’s IP address. In this case, 192.168.0.13.
e rst 3 numbers are the same for all your devices on your network. Remember: your
numbers may be dierent from what is shown in the examples. Use YOUR numbers.
Your Router is called the “Default Gateway.” Copy this address into Slot 3 on your sheet.
Copy the IPv4 Subnet Mask into Slot 4.
A DNS server is needed for your PC and other devices to talk to the internet. Your camera will
need 1 DNS address. Copy the rst DNS address into Slot 5.
When you are done, you can hit the RED X on these Windows to make them go away.
Your PC IP
3 - Router
4 - Subnet Mask
5 - DNS
INFO : YOUR IP ADDRESS
Page 9
PRODUCT MANUAL NEOCAM Wireless PTZ Camera : SB-TWC360
www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524
POWER
CONNECTOR
WIFI ANTENNA
CONNECTOR
ETHERNET
CONNECTION
Attach the WIFI antenna to the connector and screw on securely.
CONNECTING THE CAMERA
Page 10
PRODUCT MANUAL NEOCAM Wireless PTZ Camera : SB-TWC360
www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524
Plug the ethernet cable into the port on the camera.
CONNECTING THE CAMERA
Page 11
PRODUCT MANUAL NEOCAM Wireless PTZ Camera : SB-TWC360
www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524
Plug the the other end of the ethernet cable into a free port on your Router.
Note: your Router may look dierent from the example shown.
Ports are usually called LAN 1, LAN 2, and so on.
CONNECTING THE CAMERA
Page 12
PRODUCT MANUAL NEOCAM Wireless PTZ Camera : SB-TWC360
www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524
Now plug in your power adapter.
Please allow 30 seconds for your camera to start. It will move around during the start up
process.
During this time, your camera will try to nd a free IP address on your network.
CONNECTING THE CAMERA
Page 13
PRODUCT MANUAL NEOCAM Wireless PTZ Camera : SB-TWC360
www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524
You are now going to use the soware you downloaded from our site. is is called IP Camera
Tool.
IP Camera Tool will do one thing - it will locate your camera on your network and let you access
it for the rst time.
Double-click IP Camera Tool and let it run. It may take a minute, but it should locate your
camera on your network.
Your camera will appear as ANONYMOUS and it will have a new IP Address that will look
similar to other Addresses on your network. e last set of numbers will be unique to the
camera.
Remember, the numbers shown here are only examples. Your network could look quite
dierent.
When your camera appears in IP Camera Tool, double-click it.
Your web browser should open and a login screen should appear.
Note: Your camera works best with Internet Explorer. While it will work with other browsers,
only Internet Explorer will show you ALL the options for your camera.
IP CAMERA SOFTWARE
e location on your network the cam-
era found. is location may change if
you do not make it permanant, as noted
later in this manual.
Page 14
PRODUCT MANUAL NEOCAM Wireless PTZ Camera : SB-TWC360
www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524
Your login screen should appear in Internet Explorer or your main browser.
Enter the name “admin” in the User area. All lower case.
Click Sign In.
LOG IN
Page 15
PRODUCT MANUAL NEOCAM Wireless PTZ Camera : SB-TWC360
www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524
Internet Explorer uses soware called ACTIVE X to run some of the features of your camera.
You should ALLOW ActiveX to run if you want all the features.
Aer you ALLOW, you will need to LOGIN again.
INTERNET EXPLORER
Page 16
PRODUCT MANUAL NEOCAM Wireless PTZ Camera : SB-TWC360
www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524
Your camera should now be working using the initial settings.
We’re going to make some quick changes to the settings. First, let’s change the resolution of the
camera to a higher setting.
THE MAIN INTERFACE
Page 17
PRODUCT MANUAL NEOCAM Wireless PTZ Camera : SB-TWC360
www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524
Click and choose 640x480.
SET RESOLUTION
Page 18
PRODUCT MANUAL NEOCAM Wireless PTZ Camera : SB-TWC360
www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524
Now change the MODE of your camera to suit your needs. In the US, this is usually 60 HZ, or
Outdoor.
Now, click on FOR ADMINISTRATOR, on the bottom right of the screen.
CAMERA MODE
Page 19
PRODUCT MANUAL NEOCAM Wireless PTZ Camera : SB-TWC360
www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524
On the right-hand side, there are several options for dierent features. We’re going to cover the
basics in this manual.
Let’s name your camera. Click on ALIAS SETTINGS.
CAMERA SETTINGS
Page 20
PRODUCT MANUAL NEOCAM Wireless PTZ Camera : SB-TWC360
www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524
Enter a name for your camera, such as MyCamera. Click SUBMIT.
Now, click on DATE AND TIME.
NAME YOUR CAMERA
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48

NEO Coolcam SB-TWC360 User manual

Brand
NEO Coolcam
Model
SB-TWC360
Category
Security cameras
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents