Atdec TH-3070-UT User guide

Category
Flat panel wall mounts
Type
User guide
General Features
A
Range of Movement
B
ADJUSTABLE TILT OF
-5° TO 15°
525mm (23”) OF HORIZONTAL ADJUSTMENT
from180mm (7”) to 800mm (31.5”)
-5°
15°
No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pty Ltd.
Due to continuing product development, the manufacture reserves the right to alter specifications without notice. Published: 09.04.13©
32mm
(1.26”)
125mm
(4.92”)
125mm to 500mm
(4.92” to 19.69”)
180mm to 800mm
(7” to 31.5”)
24mm
(0.95”)
250mm
(10)
535mm
(21”)
117.5mm
(4.63”)
10mm
(0.39”)
56.5mm
(2.22”)
16mm
(0.63”)
43mm
(1.69”)
660mm
(26”)
845mm
(33.27”)
200mm
(7.87”)
263mm
(10.35”)
175mm
(6.89”)
200mm
(7.87”)
68mm
(2.68”)
10mm
(0.39”)
NOTE
Maximum load = 91kg (200lbs)
Suits displays with mounting hole patterns from 180mm to 800mm
wide (7”-31.5”) by 125mm to 500mm high (5”-19.69”).
Mounting hardware included
Warranty: 10 years limited
Mounting screws included:
M8x15mm / M8x35mm / M8x45mm (x4 each)
M6x15mm / M6x35mm / M6x45mm (x4 each)
M5x15mm / M5x35mm / M5x45mm (x4 each)
M4x15mm / M4x35mm / M4x45mm (x4 each)
Mounting hardware included:
Coach Screw (x4) Masonry Wall Plug (x4) Dry Wall Anchor (x6)
Washer (x4) Multi Washer (x4)
Spacer Bush (x4) Recessed Hole Bush (x4)
Mounting screws and hardware
Technical Specifications
Flat Screen Wall Mount | Tilt
TH-3070-UT
  • Page 1 1

Atdec TH-3070-UT User guide

Category
Flat panel wall mounts
Type
User guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI