TEAC LEV40GD3FHD Quick start guide
- Category
- LCD TVs
- Type
- Quick start guide
This manual is also suitable for
MODEL: LEV40GD3FHD
Note: Please make sure that the unit is completely disconnected
from the main power supply before changing cable connections.
2.Insert batteries
according to +/- polarity
symbols.
5V 0.5A
USBHDMI2 HDMI3
VIDEO L RAUDIO
Composite
cable
Component
Headphones
USB
cable
Coaxial
cable
HDMI
cable
cable TV
company
VHF/UHF
antenna
cable receiver/satellite box
VGA
cable
Audio
cable
RF Coaxial
cable
PC AUDIO VGA HDMI1Headphone COAXIAL RF
Y
Pb
Pr
auto tuning (ATV and DTV signals).
(For more details see "Channel Customisation", page 14 in the User Manual.)
“DTV”, “ATV”, “AV”, "YPbPr", "HDMI1", "HDMI2", "HDMI3",
CH
+/-
+/-
+/-
+
-
15
1. Connect a USB/Hard Disk Drive (HDD) at the rear panel as shown by the picture
as below.
2. After USB/HDD is connected, you will need to format it before doing any recording.
3. Follow instructions below to enter DVR menu to format USB / HDD:
Press the MENU button on the remote control.
Select Setup tab and press enter.
Scroll down and select DVR Settings
Select Device List, then choose Yes to format USB/HDD.
Recording
nacSotuAVTnohctiwS
USB Media Playback
WARNING: Formatting an external drive will erase all memory in the system. Please make sure
that no important documents are stored in the external drive before formatting. TEAC is not
responsible for any loss of data.
TEAC WARRANTY SERVICE HOTLINE
4. Press the STOP button to stop recording.
5. Press the REC.LIST button on your remote to view your recorded file list.
(For more details, refer to “Recording Operation” , pages 24-27 in the User Manual.)
A Connect a USB/Hard Disk Drive (HDD) at the rear panel of the unit.
B Press the USB button on the remote control.
(For more details, refer to "Multimedia Operation", page 19-23 in the User Manual.)
Monday - Friday, AEST 8.30AM - 5PM
NOTE: For best performance with
external HDDs, use a HDD with an
external power supply.
Move MENU: Return EXIT: Exit
DVR Settings
HDMI CEC Control
Time Settings
Blue Screen
Teletext
Subtitle
Audio Languages
OSD Language
Setup
English
Off
1300 553 315
1 2 3
4 5 6
7 8 9
0
OK
CH.FAV
AUDIO MUTE
DTV/USB INPUT
PICTURE SOUND ASPECTSLEEP
EXIT
DISPLAY
CH
CH
VOL
VOL
HOLD
D.MENU D.TITLE
VOL
TV/TXT CANCEL REVEAL REPEAT
D.SETUP
SUBTITLE A-B GOTO
SIZE SUBPAGE INDEX
DELETE REC.LIST SCH.LIST SCREEN
MENU
EPG
0118020315
Move MENU: Return EXIT: Exit
Favorite Manager
Signal Information
Channel Edit
Manual Scan
Auto Scan
Channel
1 2 3
4 5 6
7 8 9
0
OK
CH.FAV
AUDIO MUTE
DTV/USB INPUT
PICTURE SOUND ASPECTSLEEP
EXIT
DISPLAY
CH
CH
VOL
VOL
HOLD
D.MENU D.TITLE
VOL
TV/TXT CANCEL REVEAL REPEAT
D.SETUP
SUBTITLE A-B GOTO
SIZE SUBPAGE INDEX
DELETE REC.LIST SCH.LIST SCREEN
MENU
EPG
0118020315
L-in R-inVideo
HDMI2
HDMI1RF
HDMI3
USB
COAXIALY Pb Pr
A Connect your antenna to the RF port. Connect the power plug to the TV.
Plug your TV (and any other connected devices) into the wall power outlet. Switch on the wall outlet's power.
B
C
The TV should now be in Standby Mode with the LED indicator lighted up in red. Press the POWER button
on the TV or remote control to turn it on. The LED light will switch to green when the TV is on.
L-in R-inVideoHDMI3HDMI2
USB
"PC", "USB", "DVD".
-
1
-
2
TEAC LEV40GD3FHD Quick start guide
- Category
- LCD TVs
- Type
- Quick start guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
TEAC LCDV3956FHD Quick start guide
-
-
TEAC DLE4689FHD Quick start guide
-
TEAC LE32G6FHD Quick start guide
-
-
-
-
-
-