(Not Supplied)
(Not Supplied)
(Not Supplied)
(Not Supplied)
(Not Supplied)
Note: Please make sure that the unit is completely disconnected
from the main power supply before changing cable connections.
2. Insert batteries
according to +/-
polarity symbols.
1. Open the cover
3. Close the cover.
MODEL: LEDV19U83HD
LEDV24U83FHD
LEDV22U83FHD
HDMI2
L-in R-in
HDMI2
L-in R-in
Y Pb Pr
USB HDMI1
HDMI2
L-in R-in
Y Pb Pr
USB HDMI1
Y Pb Pr
USB HDMI1
Y Pb Pr
USB HDMI1
auto tuning (ATV and DTV signals).
(For more details see"Customising the CHANNEL settings", page 13 of User Manual.)
“DTV”, “ATV”, “AV”, “PC”, “YPBPR”, “DVD”, “HDMI1”, “HDMI2”
CH
+/-
+/-
+/-
+
-
10
nacSotuAVTnohctiwS
USB Media Playback
A Connect a USB/Hard Disk Drive (HDD) at the rear panel of the unit.
B Press the USB button on the remote control.
(For more details, refer to "Multimedia Operation", page 21 of User Manual.)
“USB”.
1 2 3
4 5 6
7 8 9
0
OK
CH.FAV
AUDIO MUTE
DTV/USB INPUT
PICTURE SOUND ASPECTSLEEP
EXIT
DISPLAY
CH
CH
VOL
VOL
HOLD
D.MENU D.TITLE
VOL
TV/TXT CANCEL REVEAL REPEAT
D.SETUP
SUBTITLE A-B GOTO
SIZE SUBPAGE INDEX
DELETE REC.LIST SCH.LIST SCREEN
MENU
EPG
0118020315
1 2 3
4 5 6
7 8 9
0
OK
CH.FAV
AUDIO MUTE
DTV/USB INPUT
PICTURE SOUND ASPECTSLEEP
EXIT
DISPLAY
CH
CH
VOL
VOL
HOLD
D.MENU D.TITLE
VOL
TV/TXT CANCEL REVEAL REPEAT
D.SETUP
SUBTITLE A-B GOTO
SIZE SUBPAGE INDEX
DELETE REC.LIST SCH.LIST SCREEN
MENU
EPG
0118020315
-
A Connect your antenna to the RF port. Connect the power adaptor to the TV.
B Plug your TV (and any other connected devices) into the main power outlet.
The TV should now be in Standby mode with the LED indicator lighted up in red. Press the POWER
button on the TV's right panel or on the remote control to turn it on. The LED will switch to green as the
TV turns on.
C
Recording
1. Connect a USB/Hard Disk Drive (HDD) at the rear panel as shown by the picture
as below.
2. After USB/HDD is connected, you will need to format it before doing any recording.
3. Follow instructions below to enter DVR menu to format USB / HDD:
Press menu button on the remote control.
Select CHANNEL tab and press enter.
Scroll down and select DVR File System.
Select Start to format USB / HDD.
4. Once formatting is done, select your desired channel and press button to record.
The progress bar will be displayed.
5. Press the STOP button to stop recording.
6. Press the REC LIST button on your remote to view your recording.
(For more details, refer to “Recording Operation” , page 26-32 of User Manual)
WARNING: Formatting an external drive would erase all memory in the system. Please make sure
that no important documents are stored in the external drive before formatting. TEAC is not
responsible for any loss of data.
→
DVR File System
Signal Information
Record Start
Recorded List
Recorded Mode
Schedule List
Free Record Limit 1Hr.
DVR File System
Power adaptorMains cable
TEAC CUSTOMER SUPPORT HOTLINE (TCS)
1300 553 315
Between Monday to Friday – EST 9AM to 6PM
HDMI2
L-in R-in
Y Pb Pr
USB HDMI1
Y Pb Pr
USB HDMI1
-
1
-
2
TEAC LEDV22U83FHD Quick start guide
- Type
- Quick start guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
TEAC LCDV3956FHD Quick start guide
-
TEAC DLE4689FHD Quick start guide
-
-
-
TEAC LE32G6FHD Quick start guide
-
-
-
-
-