MODEL: LEV2294FHD
LEV2494FHD
Note: Please make sure that the unit is completely disconnected
from the main power supply before changing cable connections.
2.Insert batteries
according to +/- polarity
symbols.
(Not Supplied)
(Not Supplied)
(Not Supplied)
(Not Supplied)
(Not Supplied)
L-i n R-inVIDEO
Y Pb Pr
L-i n R-inVIDEO
COAX
Headphone
POWER
Y Pb Pr
USB
HDMI
COAX
Headphone
POWER
USB
HDMI
Y Pb PrUSB
HDMI
COAX
L-i n R-in
Headphone
VIDEO
POWER
auto tuning (ATV and DTV signals).
(For more details see"Customising the CHANNEL settings", page 16 of User Manual.)
“DTV”, “ATV”, "AV", "PC", "YPbPr", "DVD", "HDMI", "Media".
CH
+/-
+/-
+/-
+
-
10
1. Connect a USB/Hard Disk Drive (HDD) at the side panel as shown by the picture
as below.
2. After USB/HDD is connected, you will need to format it before doing any recording.
3. Follow instructions below to enter DVR menu to format USB / HDD:
Press menu button on the remote control.
Select Feature tab and press enter .
Scroll down and select DVR File System.
Select format and press RED button to format the selected USB device.
4. Once formatting is done, select your desired channel and press button to record.
The progress bar will be displayed.
Recording
nacSotuAVTnohctiwS
USB Media Playback
5. Press stop button to stop recording.
6. Press REC list button on your remote to view your recording.
A Connect a USB/Hard Disk Drive (HDD) at the side panel of the unit.
B Press USB button on the remote control.
(For more details, refer to "Multimedia Operation", page 21-23 of User Manual.)
(For more details, refer to “Recording Operation” , page 24-26 of User Manual)
123
456
789
0
OK
CH.FAV
AUDIO MUTE
DTV/USB INPUT
PICTURE SOUND ASPECT
SLEEP
EXIT
DISPLAY
CH
CH
VOL
VOL
HOLD
D.MENU D.TITLE
VOL
TV/TXT CANCEL REVEAL REPEAT
D.SETUP
SUBTITLE A-B GOTO
SIZE SUBPAGE INDEX
DELETE REC.LIST SCH.LIST SCREEN
MENU
EPG
0118020315
123
456
789
0
OK
CH.FAV
AUDIO MUTE
DTV/USB INPUT
PICTURE SOUND ASPECT
SLEEP
EXIT
DISPLAY
CH
CH
VOL
VOL
HOLD
D.MENU D.TITLE
VOL
TV/TXT CANCEL REVEAL REPEAT
D.SETUP
SUBTITLE A-B GOTO
SIZE SUBPAGE INDEX
DELETE REC.LIST SCH.LIST SCREEN
MENU
EPG
0118020315
WARNING: Formatting an external drive would erase all memory in the system. Please make sure
that no important documents are stored in the external drive before formatting. TEAC is not
responsible for any loss of data.
TEAC CUSTOMER SUPPORT HOTLINE (TCS)
1300 553 315
Between Monday to Friday – AEST 8:30AM to 6PM
NOTE: For best performance with external HDDs, use a HDD
with an external power supply. Use only USB for recording.
Back View
USB
Y Pb Pr
HDMI
Y Pb Pr
USB
HDMI
A Connect your antenna to the RF port. Connect the power adaptor to the TV.
B Plug your TV (and any other connected devices) into the main power outlet.
The TV should now be in Standby mode with the LED indicator lighted up in red. Press the POWER
button on the TV's right panel or on the remote control to turn it on. The LED will switch to green as the
TV turns on.
C
COAX
L-i n R-in
Headphone
VIDEO
POWER
Power adaptorMains cable
/