2. Intermec
  3. MobileLAN access 2102
MobileLAN access 2102

Intermec MobileLAN access 2102 Mounting & Installation

  • Hello! I am an AI chatbot trained to assist you with the Intermec MobileLAN access 2102 Mounting & Installation. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What is the purpose of the Intermec 2102 cubicle bracket?
    What is the part number for the Intermec 2102 cubicle bracket kit?
    How do I mount the UAP using the cubicle bracket?
    What are the steps to install the UAP in the mounting bracket?
2102 Cubicle Bracket Instruction Sheet
This instruction sheet explains how to mount the 2102 Universal
Access Point
™
(UAP) using the 2102 cubicle bracket kit (Part No.
070366). You use the 2102 cubicle bracket in combination with the
mounting bracket that ships with the UAP.
To mount the UAP using the cubicle bracket
1. Position the cubicle bracket above the mounting bracket as
shown. Slide the cubicle bracket down until it seats in the
mounting bracket.
Cubicle
bracket
Adjustment
knob
Mounting
bracket
2102I006.eps
2. Hang the cubicle bracket over the top of a cubicle wall. Adjust the
bracket so it fits securely and then tighten the adjustment knob.
2102 Cubicle Bracket Instruction Sheet
This instruction sheet explains how to mount the 2102 Universal
Access Point
™
(UAP) using the 2102 cubicle bracket kit (Part No.
070366). You use the 2102 cubicle bracket in combination with the
mounting bracket that ships with the UAP.
To mount the UAP using the cubicle bracket
1. Position the cubicle bracket above the mounting bracket as
shown. Slide the cubicle bracket down until it seats in the
mounting bracket.
Cubicle
bracket
Adjustment
knob
Mounting
bracket
2102I006.eps
2. Hang the cubicle bracket over the top of a cubicle wall. Adjust the
bracket so it fits securely and then tighten the adjustment knob.
3. To install the UAP in the mounting bracket, insert the hooks on
the bracket into the slots on the UAP.
Hook
(2 places)
Cubicle
bracket
Mounting
bracket
Slot
(2 places)
2102 back
panel
Clip
2102G007.eps
4. While holding the brackets in place, slide the UAP up slightly and
then press on the base of the UAP until it clicks into the clip on
the base of the mounting bracket.
You have completed the installation of the 2102 cubicle bracket.
Part No. 070440-001
*070440-001*
*070440-001*
6001 36th Avenue West
P.O. Box 4280
Everett, WA 98203-9280
© 2000 Intermec
All Rights Reserved
3.
To install the UAP in the mounting bracket, insert the hooks on
the bracket into the slots on the UAP.
Hook
(2 places)
Cubicle
bracket
Mounting
bracket
Slot
(2 places)
2102 back
panel
Clip
2102G007.eps
4. While holding the brackets in place, slide the UAP up slightly and
then press on the base of the UAP until it clicks into the clip on
the base of the mounting bracket.
You have completed the installation of the 2102 cubicle bracket.
Part No. 070440-001
*070440-001*
*070440-001*
6001 36th Avenue West
P.O. Box 4280
Everett, WA 98203-9280
© 2000 Intermec
All Rights Reserved
/