2. Intermec
  3. MobileLAN access 2101
MobileLAN access 2101

Intermec MobileLAN access 2101, MobileLAN access WA22 Mounting & Installation

  • Hello! I am an AI chatbot trained to assist you with the Intermec MobileLAN access 2101 Mounting & Installation. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
MobileLAN access WA22/2101 Cubicle
Bracket Instruction Sheet
This instruction sheet explains how to mount the
MobileLANaccess WA22 or the MobileLANaccess 2101 on
a cubicle wall using this cubicle bracket kit (P/N 069926) with
the mounting bracket that shipped with the access point. Note
these important points:
• The cubicle bracket fits cubicle walls that are 4.6 to 9.1 cm
(1.8 to 3.6 in) thick.
• These instructions assume that you have inserted the shoulder
screws that ship with the mounting bracket into the brass
inserts on the back of the access point. For instructions on
how to insert the shoulder screws, see the quick start guide
that shipped with your access point.
2101I001.e
p
s
Mounting
bracket
Cubicle
bracket
Adjustment
knob
Cubicle
wall
To mount the access point using the cubicle bracket
1 Place the cubicle bracket over the top of the cubicle wall.
2 Tighten the adjustment knob on the cubicle bracket so the
bracket is securely positioned on the cubicle wall.
3 Position the mounting bracket with the arrow pointing up, as
shown in the illustration.
4 Slide the mounting bracket down the cubicle bracket until it
is firmly seated.
5 Insert the shoulder screws on the access point into the
keyhole slots in the mounting bracket.
6 Slide the access point down until it is firmly seated in the
mounting bracket.
6001 36th Avenue West
Everett, WA 98203
U.S.A.
www.intermec.com
© 2002 Intermec Technologies Corp.
All Rights Reserved
MobileLAN access WA22/2101 Cubicle Bracket Instruction Sheet
*069962-002*
*069962-002*
/