Fantec SB-200BT User manual

Brand: Fantec

Model: SB-200BT

Type: User manual

Fantec Bluetooth Soundbar

Model: Fantec SB-200BT

Manual English

Technical Specifications:

Dimensions (W x H x D): 340 x 110 x 110 mm

Output power: 24W (2 x 12W) RMS

Bluetooth version: V2.1 + EDR

Bluetooth range: up to 10m

Power adaptor: Input 100-240VAC 50/60Hz, output 12V 2A

Source

Press the Source button to select AUX IN or Bluetooth

as audio source.

Volume

Turn the knob counter-clockwise or clockwise to

decrease or increase the soundbar volume.

Treble

Press this button once to access the treble setting of

the soundbar.

Bass

Press this button twice to access the bass setting of

the soundbar.

Standby

Press and hold this button for more than 3 seconds to

set the soundbar to standby mode. Press again to

switch the soundbar back on.

Press this button to skip one track back in Bluetooth

mode.*

Press this button to pause or start the track in

Bluetooth mode.*

Press this button to skip one track forward in Bluetooth

mode.*

LED

 Blue LED flashes fast > The soundbar is not paired

with an end device.

 Blue LED flashes slow > The soundbar is paired with

a device.

 Red LED > The soundbar is in AUX IN mode.

 Red LED flashes > The soundbar is in standby mode.

AUX IN

Jack for 3.5mm audio cable. Connect PC, notebook,

DVD player, MP3 player, mobile phone, smartphone,

tablet, etc.

Earphones jack

Input power adaptor (12V 2A)

ON/OFF switch

*This button is only available if your end device

(e.g. smartphone) supports Bluetooth 2.1.

Operation:

Connect the power adaptor to a wall outlet and the DC plug to DC IN (9) on the

device. Press the On/Off button (10) on the rear panel to switch the soundbar on.

AUX IN Mode:

Press the Source button (1) to select the input source. The red LED lights up if the

soundbar is in AUX IN mode. Connect one end of the AUX IN cable to the AUX IN

jack (7) on the device and the other end for instance to your MP3 player.

Bluetooth Mode:

Press the Source button (1) to select the input source. The blue LED flashes fast if

the soundbar is in pairing mode to connect to a Bluetooth device. You can connect

the soundbar to your PC, notebook, smartphone or tablet. Important: The end device

must feature at least Bluetooth standard 2.0. For pairing, open the Bluetooth settings

on your end device and search for available devices. You will find the soundbar

under “FANTEC audio”. Connect with the soundbar after finding (for instance with

your smartphone) “Fantec audio”. For some end devices you must enter a password;

enter “0000” (find more details about Bluetooth pairing in your device’s manual).

The LED on the soundbar flashes slow after the device is paired with the soundbar.

Press Play/Pause or Skip +/- (3, 4, 5) on the soundbar if your end device features

Bluetooth v.2.1. In this way you can control your music directly on the soundbar.

Important: Only one device at a time can be paired via Bluetooth with your

soundbar. First disconnect the old end device before pairing a new end device with

the soundbar.

Volume Control:

Turn the volume control knob to increase or decrease the volume level. Press the

volume control knob once and turn it to adjust treble, press twice and turn to adjust

bass.

Earphones Jack:

You can connect earphones to the soundbar. Connect the 3.5mm audio cable to the

jack (9) on the rear of the soundbar.

Standby / Off:

There are 2 ways to switch the device off: press and hold the volume control knob

more than 3 seconds to shift into standby mode, or switch off the soundbar

completely with the On/Off switch (10) on the rear panel.

Warnings:

Use Instructions

Do not modify the hardware or software of the device; this will void your warranty.

Use the soundbar in ambient temperatures between +5°C and +35°C.

Power Supply

The soundbar works with 12VDC power supply. Connect the supplied AC power

adaptor to a power outlet to power the soundbar. To avoid the risk of electric shock

disconnect the power adaptor from mains power supply before cleaning. Do not

connect the power adaptor in damp or dusty conditions. Always use the original

power adaptor for the soundbar.

Interference

Nearly all electric devices can cause interference if they are not specially shielded.

Under certain circumstances your soundbar can be affected.

Repairs

Turn to an authorized service center if you experience problems with the soundbar.

Do not try to repair the soundbar yourself; this can damage the soundbar and cause

personal injuries.

Disposal

At the end of its useful life dispose of the soundbar in environmentally correct

manner. Some countries have regulations for the disposal of waste electric and

electronic appliances. Please respect these regulations

Miscellaneous

Protect the soundbar from water and other liquids. If accidentally water is splashed

on the soundbar, please wipe it off immediately with a dry cloth. Electronic devices

are delicate. Avoid vibrations and impacts, especially during operation. Do not press

buttons too hard and avoid the vicinity of strong magnetic fields.

Protect the soundbar from water and other liquids. Do not try to repair the soundbar

and do not modify its design. You will forfeit your warranty claims and the soundbar

can be damaged. The device may show malfunctions during electrostatic discharge

and in strong magnetic fields. In this case disconnect from mains power supply and

reconnect after a few minutes. The device should be reset and again fully functional.

Homepage: http://www.fantec.de

Forum: http://www.fantec-forum.de

eMail: [email protected]

Fantec SB-200BT User manual

Fantec SB-200BT User manual

Fantec SB-200BT User manual

Related papers

Other documents