Peerless ACC450 User manual

Peerless
Brand
Peerless
Model
ACC450
Category
Flat panel wall mounts
Type
User manual

Peerless ACC450 Accessory Plate for VESA 200 mm x 200 mm Pattern enables the user to mount a display with a VESA 200 x 200 mounting pattern to a mounting plate. The adapter plate can be attached to the display using four M6 x 12 mm screws or M8 x 10 mm screws.

For a secure installation, use M6 x 12 mm screws (C) in place of (B), M6 x 20 mm screws (E) in place of (D), and M8 x 10 mm screws (G) in place of (F), and tighten them using an allen wrench (J).

The adapter plate can be hooked onto the mounting plate and secured using two M5 x 6 mm screws (H), leaving .25" exposed thread, into the top holes of the adapter plate.

Peerless ACC450 Accessory Plate for VESA 200 mm x 200 mm Pattern enables the user to mount a display with a VESA 200 x 200 mounting pattern to a mounting plate. The adapter plate can be attached to the display using four M6 x 12 mm screws or M8 x 10 mm screws.

For a secure installation, use M6 x 12 mm screws (C) in place of (B), M6 x 20 mm screws (E) in place of (D), and M8 x 10 mm screws (G) in place of (F), and tighten them using an allen wrench (J).

The adapter plate can be hooked onto the mounting plate and secured using two M5 x 6 mm screws (H), leaving .25" exposed thread, into the top holes of the adapter plate.

1 of 2
ISSUED: 10-13-05 SHEET #: 202-9039-2 08-16-11
Note: Read entire instruction sheet before you start installation and assembly.
For customer care call (800) 865-2112.
D
F
B
• Do not begin to install your Peerless product until you have read and understood the instructions and warnings
contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, please
call Peerless customer care at 1-800-865-2112.
• This product should only be installed by a qualifi ed professional.
• Make sure that the supporting surface will safely support the combined load of the equipment and all attached
hardware and components.
• Never exceed the Maximum Load Capacity of 150 lb (68 kg).
• Always use an assistant or mechanical lifting equipment to safely lift and position equipment.
• Tighten screws fi rmly, but do not overtighten. Overtightening can damage the items, greatly reducing their holding
power.
WARNING
C
E
G
H
I
J
Installation and Assembly:
Accessory Plate for VESA
®
200 mm x 200 mm Pattern
Model: ACC450
Description Qty Part #
A
adapter plate 1 095-1721
B
M6 x 12 mm phillips screw 4 520-1128
C
M6 x 12 mm serrated washer head socket pin screw 4 510-1050
D
M6 x 20 mm phillips screw 4 520-9402
E
M6 x 20 mm serrated washer head socket pin screw 4 510-9554
F
M8 x 10 mm phillips screw 4 520-1605
G
M8 x 10 mm serrated washer head socket pin screw 4 520-1706
H
M5 x 6 mm phillips screw 4 520-1023
I
M5 x 6 mm serrated washer head socket pin screw 4 520-1114
J
4 mm security allen wrench 1 560-9646
Parts List
Before you begin, make sure all parts shown are included with your product.
A
2 of 2
ISSUED: 10-13-05 SHEET #: 202-9039-2 08-16-11
A
Attaching Adapter Plate to Display with VESA 200 x 200 Mounting Pattern
Choose hole pattern as shown. Attach adapter
plate (A) to back of display using four M6 x 12 mm
screws (B) or M8 x 10 mm screws (F).
Notes:
• If screw (B) gets less than three threads of
engagement, attach adapter plate (A) to back of
display using four M6 x 20 mm screws (D).
• For security option, use M6 x 12 mm screws (C)
in place of (B), M6 x 20 mm screws (E) in place of
(D), and M8 x 10 mm screws (G) in place of (F).
Tighten security screws using allen wrench (J).
Note: Flat panel display
may appear slightly
different than illustrated.
• If screws don't get three complete turns in the display inserts or if screws bottom out and adapter plate is still not
tightly secured, damage may occur to display or product may fail.
WARNING
A
H or I
H or I
Thread two M5 x 6 mm screws (H), leaving .25" exposed thread, into top holes of adapter plate (A). Hook adapter
plate onto mounting plate, and secure using bottom two M5 x 6 mm screws as shown in fi gures 2.1 and 2.2.
Tighten all four screws.
Note: For security option, use M5 x 6 mm screws (I) in place of (H). Tighten security screws using allen wrench (J).
MOUNTING PLATE
(NOTE: MOUNTING PLATE
SHOWN WITHOUT FULL
WALL MOUNT ASSEMBLY
FOR CLARITY)
fi g. 2.1 fi g. 2.2
MOUNTING PLATE
(NOTE: MOUNTING PLATE
SHOWN WITHOUT FULL
WALL MOUNT ASSEMBLY
FOR CLARITY)
1
2
© 2011, Peerless Industries, Inc. All rights reserved.
All other brand and product names are trademarks or registered trademarks of their respective owners.
Peerless Industries, Inc.
2300 White Oak Circle
Aurora, Il 60502
www.peerlessmounts.com
  • Page 1 1
  • Page 2 2

Peerless ACC450 User manual

Peerless
Brand
Peerless
Model
ACC450
Category
Flat panel wall mounts
Type
User manual

Peerless ACC450 Accessory Plate for VESA 200 mm x 200 mm Pattern enables the user to mount a display with a VESA 200 x 200 mounting pattern to a mounting plate. The adapter plate can be attached to the display using four M6 x 12 mm screws or M8 x 10 mm screws.

For a secure installation, use M6 x 12 mm screws (C) in place of (B), M6 x 20 mm screws (E) in place of (D), and M8 x 10 mm screws (G) in place of (F), and tighten them using an allen wrench (J).

The adapter plate can be hooked onto the mounting plate and secured using two M5 x 6 mm screws (H), leaving .25" exposed thread, into the top holes of the adapter plate.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents