Duerkopp Adler 911-210 User manual

Brand: Duerkopp Adler

Model: 911-210

Type: User manual

This manual is also suitable for

911-211

911

Additional Instructions

Slideway lining for the tabletop

All rights reserved.

Property of Dürkopp Adler AG and protected by copyright. Any reuse of these contents, including

extracts, is prohibited without the prior written approval of Dürkopp Adler AG.

Copyright © Dürkopp Adler AG 2016

IMPORTANT

READ CAREFULLY BEFORE USE

KEEP FOR FUTURE REFERENCE

Table of Contents

Additional Instructions 911 - 00.0 - 04/2016 1

1 About these additional instructions .........................................3

2 Components of the kit................................................................ 4

3 Attaching the slideway lining to the tabletop ..........................5

4 Appendix .....................................................................................6

Table of Contents

2 Additional Instructions 911 - 00.0 - 04/2016

About these additional instructions

Additional Instructions 911 - 00.0 - 04/2016 3

1 About these additional instructions

These additional instructions describe how to attach the slideway lining for

the tabletop to machines grouped in the 911 class.

Important

The slideway lining for the tabletop is 1.5 mm thick.

Before attaching the slideway lining, you need to shift the height of the

machine head by 1.5 mm and realign the machine head ( Service

I

nstructions).

Components of the kit

4 Additional Instructions 911 - 00.0 - 04/2016

2 Components of the kit

Check whether the scope of delivery for the kit is correct prior to attaching

the slideway lining.

Different kits are available that vary with t

he size of the sewing field.

The installation procedure is the same for all kits.

Kit 0911 597834 0911 597844 0911 597845 0911 597864

Sewing field size 3020 6055 2010 6020

Plate 0911 400724 0911 400754 0911 400694 0911 400774

Double sided adhesive

t

ape

B760 200015

Additional Instructions 0791 911714 EN

Attaching the slideway lining to the tabletop

Additional Instructions 911 - 00.0 - 04/2016 5

3 Attaching the slideway lining to the tabletop

Fig. 1: Attaching the slideway lining to the tabletop

To attach the slideway lining:

1. Remove the sliding plate (not shown).

2. Affix the double-sided adhesive tape on the underside of the slideway

lin

ing (2) and peel off the protective film from the tape (see

Appendix ( p. 6)).

3. Align the slideway lining (2) flush with the tabletop (1) and apply it.

4. Bond the inner insertion plate of the slideway lining (4) into the tabletop

cut-

out (3).

5. Reinsert the sliding plate.

6. Align the height of the machine head ( Service Instructions).

(1) - Tabletop

(2) - Slideway lining

(3) - Tabletop cut-out

(4) - Inner insert of the slideway lining

③④

①

②

Appendix

6 Additional Instructions 911 - 00.0 - 04/2016

4Appendix

Positions for double sided adhesive tape at the bottom side of the

slideway lining

Abb. 2: Sewing field size 2010

Abb. 3: Sewing field size 3020

Double sided adhesive

tape flush fitting on

POM-plate

Double sided adhesive

tape flush fitting on

POM-plate

Appendix

Additional Instructions 911 - 00.0 - 04/2016 7

Abb. 4: Sewing field size 6020

Abb. 5: Sewing field size 6055

Double sided adhesive

tape flush fitting on

POM-plate

Double sided adhesive

tape flush fitting on

POM-plate

Appendix

8 Additional Instructions 911 - 00.0 - 04/2016

DÜRKOPP ADLER AG

Potsdamer Str. 190

33719 Bielefeld

Germany

Phone: +49 (0) 521 925 00

Email: [email protected]m

www.duerkopp-adler.com

Subject to design changes - Part of the machines shown with additional equipment - Printed in Germany

© Dürkopp Adler AG - Original Instructions - 0791 911714 EN - 00.0 - 04/2016

1
2
3
4
5
6
7
8
9
10
11
12

Duerkopp Adler 911-210 User manual

Brand: Duerkopp Adler

Model: 911-210

Type: User manual

This manual is also suitable for

911-211

Download PDF

Related papers

Other documents