the great outdoors by Minka Lavery 72416-51A-L Operating instructions

Type
Operating instructions

The great outdoors by Minka Lavery 72416-51A-L is a stylish and functional outdoor lighting fixture designed to illuminate your exterior spaces with its energy-efficient LED module. With its easy installation process, you can effortlessly mount it on a post, ensuring a secure and stable setup. The fixture's versatile design allows for simple bulb replacement, making maintenance a breeze. Experience enhanced illumination and a warm ambiance in your outdoor areas with this durable and reliable lighting solution.

The great outdoors by Minka Lavery 72416-51A-L is a stylish and functional outdoor lighting fixture designed to illuminate your exterior spaces with its energy-efficient LED module. With its easy installation process, you can effortlessly mount it on a post, ensuring a secure and stable setup. The fixture's versatile design allows for simple bulb replacement, making maintenance a breeze. Experience enhanced illumination and a warm ambiance in your outdoor areas with this durable and reliable lighting solution.

INSTALLATION INSTRUCTIONS
For Model 72416-51A-L
READ AND SAVE THESE INSTRUCTIONS
WARNI N G! SH UT PO WER OFF AT F US E O R C I RC UIT BREAKE R.
AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.
Fig.1
B
Fig. 2
Fig.3
PREPARING FOR INSTALLATION (Fig. 1)
1. Shut off the power at the circuit breaker and remove the old fixture
including the mounting hardware.
2. Carefully unpack your new fixture and lay out all the parts on a clear
area. Take care not to lose any small parts necessary for installation.
CONNECTING THE WIRES (Fig. 2)
3. While supporting the fixture, connect the electrical wires as shown in
Fig. 2, making sure that all wire connectors are secured. If your post
has a ground wire (green or bare copper), connect the fixture ground
wire to it. If not, consult your electrician for proper grounding. After
wires are connected, tuck them carefully inside the post cup (X).
4. Align the fixture to post (X) and secure with screws (H).
5. Bulb (G) information: (1 x AC LED 10W included.)
DO NOT EXCEED THE MAXIMUM WATTAGE RATING! (NE
PAS DEPASSER LA PUISSANCE NOMINALE MAXIMALE!)
COMPLETING THE INSTALLATION (Fig. 1)
6. Remove top cover (A) by loosening screws (B).
7. Place the small round glass (F) over LED module (O).
8. Re-attach top cover (A) with screws (B).
Replacing LED module (Fig. 3)
The LED module can be replaced by a qualified electrician
without cutting of wire and without damage to any decorative
element to which the fixture is attached. See installation steps for
more details (Fig 3.)
1. Remove top cover (A) by loosening screws (B).
a. Remove the small round glass (F) followed by clear seedy
glass (E) and cage (D) by loosening screws (K).
b. Remove wire nuts (L) and loosen module screws (H).
c. Carefully remove the LED module (Q) for re-lamping. Note:
The LED module should be provided by a specified supplier.
d. For better heat dissipation the LED module (Q) should be
installed with the heat transfer material (P) when re-lamping
Your installation is now complete. Return power to the
junction box and test the fixture
FIXTURE
WIRES
Black or
Smooth
HOUS
E
WIRES
Black
(Hot)
HOUS
E
WIRES
White
(Neutra
l)
FIXTURE
WIRES
Bare
Copper
(Ground)
HOUS
E
WIRES
Green
or
Bare
Copper
(Groun
d)
Q(LED module)
P(Graphite sheet)
L
K
I (Module ring)
  • Page 1 1

the great outdoors by Minka Lavery 72416-51A-L Operating instructions

Type
Operating instructions

The great outdoors by Minka Lavery 72416-51A-L is a stylish and functional outdoor lighting fixture designed to illuminate your exterior spaces with its energy-efficient LED module. With its easy installation process, you can effortlessly mount it on a post, ensuring a secure and stable setup. The fixture's versatile design allows for simple bulb replacement, making maintenance a breeze. Experience enhanced illumination and a warm ambiance in your outdoor areas with this durable and reliable lighting solution.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI