the great outdoors by Minka Lavery 8266-66-L Installation guide

Brand: the great outdoors by Minka Lavery

Model: 8266-66-L

Type: Installation guide

The great outdoors by Minka Lavery 8266-66-L is a versatile and stylish lighting fixture that is perfect for illuminating your outdoor space. With its classic design and durable construction, this fixture is built to withstand the elements and provide years of reliable service.

The 8266-66-L features a sturdy post mount design that makes it easy to install on any flat surface. The fixture's included LED module provides bright, energy-efficient lighting, and it can be easily replaced if needed.

The great outdoors by Minka Lavery 8266-66-L is a versatile and stylish lighting fixture that is perfect for illuminating your outdoor space. With its classic design and durable construction, this fixture is built to withstand the elements and provide years of reliable service.

The 8266-66-L features a sturdy post mount design that makes it easy to install on any flat surface. The fixture's included LED module provides bright, energy-efficient lighting, and it can be easily replaced if needed.

INSTALLATION INSTRUCTIONS

Model #8265-L 8266-L

READ AND SAVE THESE INSTRUCTIONS

W A R N I N G ! S H U T P O W E R O F F AT F U S E O R C I R C U I T B R E A K E R .

AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.

1.

Shut off power at the circuit b

reaker and remove the old

fixture including the mounting hardware.

2. Carefully unpack your new fixture and lay out all the

parts in a clear area. Take care not to misplace any

small parts necessary for installation.

3. Pull the black, white and ground wires out of post (A).

4. While supporting the fixture, connect electrical wires. If

your post has a ground wire (green or bare copper),

connect the fixture ground wire to it. If not, consult your

electrician for proper grounding. After wires are

connected, tuck them carefully inside the post cup (B).

5. Align the lantern with post (A) and secure with screws

(C). (Fig.1&2)

6. Bulb (L) information (1 x AC LED 10W included.)

(DO NOT EXCEED THE MAXIMUM WATTAGE

RATING) (NE PAS DEPASSER LA PUISSANCE

NOMINALE MAXIMALE!)

Replacing LED module (Fig.3)

The LED module can be replaced by a qualified

electrician without cutting of wire and without damage to

any decorative element to which the fixture is attached. See

installation steps for more details (Fig.3).

a. Shut off power, unscrew finial (D), remove washer (E)

and top covers (F&G). Remove aluminum panel (J) with

support (I) by loosening hex nuts (H) from the fixture

cage .

b. Unplug the male and female jacket (P&Q), loosening

screws (N) and carefully remove LED module (L) for re-

lamping. Note: The LED module should be provided by

a specified supplier.

c. For better heat dissipation the LED module (L) should be

installed with the heat transfer material (K) when re-

lamping.

Your installation is now complete. Return power to the

outlet box and test the fixture.

Note: Illustration (Fig.1) on this manual is for

installation purposes only. It may or may not be

identical to the fixture purchased.

Fig.

1

A

B

C

Fig. 3

Fig.2

1

the great outdoors by Minka Lavery 8266-66-L Installation guide

Brand: the great outdoors by Minka Lavery

Model: 8266-66-L

Type: Installation guide

The great outdoors by Minka Lavery 8266-66-L is a versatile and stylish lighting fixture that is perfect for illuminating your outdoor space. With its classic design and durable construction, this fixture is built to withstand the elements and provide years of reliable service.

The 8266-66-L features a sturdy post mount design that makes it easy to install on any flat surface. The fixture's included LED module provides bright, energy-efficient lighting, and it can be easily replaced if needed.

Download PDF

Related papers

Other documents