the great outdoors by Minka Lavery 8265-66-L Installation guide

Type
Installation guide

The great outdoors by Minka Lavery 8265-66-L is a versatile and stylish outdoor lighting solution. With its easy installation process, you can quickly and easily add light to your outdoor space. The fixture is designed to be weather-resistant, making it ideal for use in all types of climates. The 8265-66-L uses a single 10W AC LED bulb, which is included with the fixture. This energy-efficient bulb provides ample light output while keeping energy costs low. The fixture also features a replaceable LED module, so you can easily replace the bulb if needed.

The great outdoors by Minka Lavery 8265-66-L is a versatile and stylish outdoor lighting solution. With its easy installation process, you can quickly and easily add light to your outdoor space. The fixture is designed to be weather-resistant, making it ideal for use in all types of climates. The 8265-66-L uses a single 10W AC LED bulb, which is included with the fixture. This energy-efficient bulb provides ample light output while keeping energy costs low. The fixture also features a replaceable LED module, so you can easily replace the bulb if needed.

INSTALLATION INSTRUCTIONS
Model #8265-L 8266-L
READ AND SAVE THESE INSTRUCTIONS
W A R N I N G ! S H U T P O W E R O F F AT F U S E O R C I R C U I T B R E A K E R .
AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.
1.
Shut off power at the circuit b
reaker and remove the old
fixture including the mounting hardware.
2. Carefully unpack your new fixture and lay out all the
parts in a clear area. Take care not to misplace any
small parts necessary for installation.
3. Pull the black, white and ground wires out of post (A).
4. While supporting the fixture, connect electrical wires. If
your post has a ground wire (green or bare copper),
connect the fixture ground wire to it. If not, consult your
electrician for proper grounding. After wires are
connected, tuck them carefully inside the post cup (B).
5. Align the lantern with post (A) and secure with screws
(C). (Fig.1&2)
6. Bulb (L) information (1 x AC LED 10W included.)
(DO NOT EXCEED THE MAXIMUM WATTAGE
RATING) (NE PAS DEPASSER LA PUISSANCE
NOMINALE MAXIMALE!)
Replacing LED module (Fig.3)
The LED module can be replaced by a qualified
electrician without cutting of wire and without damage to
any decorative element to which the fixture is attached. See
installation steps for more details (Fig.3).
a. Shut off power, unscrew finial (D), remove washer (E)
and top covers (F&G). Remove aluminum panel (J) with
support (I) by loosening hex nuts (H) from the fixture
cage .
b. Unplug the male and female jacket (P&Q), loosening
screws (N) and carefully remove LED module (L) for re-
lamping. Note: The LED module should be provided by
a specified supplier.
c. For better heat dissipation the LED module (L) should be
installed with the heat transfer material (K) when re-
lamping.
Your installation is now complete. Return power to the
outlet box and test the fixture.
Note: Illustration (Fig.1) on this manual is for
installation purposes only. It may or may not be
identical to the fixture purchased.
Fig.
1
B
C
Fig. 3
Fig.2
  • Page 1 1

the great outdoors by Minka Lavery 8265-66-L Installation guide

Type
Installation guide

The great outdoors by Minka Lavery 8265-66-L is a versatile and stylish outdoor lighting solution. With its easy installation process, you can quickly and easily add light to your outdoor space. The fixture is designed to be weather-resistant, making it ideal for use in all types of climates. The 8265-66-L uses a single 10W AC LED bulb, which is included with the fixture. This energy-efficient bulb provides ample light output while keeping energy costs low. The fixture also features a replaceable LED module, so you can easily replace the bulb if needed.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI