Cisco Cisco ASA 5510 Configuration manual

Brand: Cisco

Model: Cisco ASA 5510

Category: Software

Type: Configuration manual

This manual is also suitable for

Americas Headquarters

Cisco Systems, Inc.

170 West Tasman Drive

San Jose, CA 95134-1706

USA

http://www.cisco.com

Tel: 408 526-4000

800 553-NETS (6387)

Fax: 408 527-0883

Cisco ASA 5500 Series Configuration

Guide using ASDM

Software Version 6.3, for use with Cisco ASA 5500 Version 8.3

Customer Order Number: N/A, Online only

Text Part Number: OL-20339-01

THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL

STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT

WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.

THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT

SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE

OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.

The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCB’s public

NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED “AS IS” WITH

ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT

LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF

DEALING, USAGE, OR TRADE PRACTICE.

IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING,

WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO

OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarks can be found at

www.cisco.com/go/trademarks. Third party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership

relationship between Cisco and any other company. (1005R)

Cisco ASA 5500 Series Configuration Guide using ASDM

 
iii
Cisco ASA 5500 Series Configuration Guide using ASDM
OL-20339-01
CONTENTS
About This Guide lix
Document Objectives lix
Audience lix
Related Documentation lx
Document Conventions lx
Obtaining Documentation, Obtaining Support, and Security Guidelines lx
PART
 
1 Getting Started and General Information
CHAPTER
 
1 Introduction to the Cisco ASA 5500 Series Adaptive Security Appliance 1-1
ASDM Client Operating System and Browser Requirements 1-1
ASA 5500 Model Support 1-2
Module Support 1-2
VPN Specifications 1-3
New Features 1-3
New Features in Version 6.3(2)/8.3(2) 1-3
New Features in Version 6.3(1)/8.3(1) 1-6
Unsupported Commands 1-13
Ignored and View-Only Commands 1-13
Effects of Unsupported Commands 1-14
Discontinuous Subnet Masks Not Supported 1-14
Interactive User Commands Not Supported by the ASDM CLI Tool 1-14
Firewall Functional Overview 1-15
Security Policy Overview 1-15
Permitting or Denying Traffic with Access Rules 1-16
Applying NAT 1-16
Protecting from IP Fragments 1-16
Using AAA for Through Traffic 1-16
Applying HTTP, HTTPS, or FTP Filtering 1-16
Applying Application Inspection 1-16
Sending Traffic to the Advanced Inspection and Prevention Security Services Module 1-16
Sending Traffic to the Content Security and Control Security Services Module 1-17
Applying QoS Policies 1-17
Applying Connection Limits and TCP Normalization 1-17

Contents

Cisco ASA 5500 Series Configuration Guide using ASDM

OL-20339-01

Enabling Threat Detection 1-17

Enabling the Botnet Traffic Filter 1-17

Configuring Cisco Unified Communications 1-18

Firewall Mode Overview 1-18

Stateful Inspection Overview 1-18

VPN Functional Overview 1-19

Security Context Overview 1-20

CHAPTER

2 Getting Started 2-1

Configuring the Security Appliance for ASDM Access 2-1

Starting ASDM 2-1

Downloading the ASDM Launcher 2-2

Starting ASDM from the ASDM Launcher 2-2

Using ASDM in Demo Mode 2-3

Starting ASDM from a Web Browser 2-4

Multiple ASDM Session Support 2-5

Factory Default Configurations 2-5

Restoring the Factory Default Configuration 2-5

ASA 5505 Default Configuration 2-6

ASA 5510 and Higher Default Configuration 2-7

Getting Started With the Configuration 2-8

Using the Command Line Interface 2-8

Using the Command Line Interface Tool 2-9

Handling Command Errors 2-9

Using Interactive Commands 2-9

Avoiding Conflicts with Other Administrators 2-10

Showing Commands Ignored by ASDM on the Device 2-10

CHAPTER

3 Using the ASDM User Interface 3-1

Information About the ASDM User Interface 3-1

Navigating in the ASDM User Interface 3-3

Menus 3-4

File Menu 3-4

View Menu 3-5

Tools Menu 3-6

Wizards Menu 3-8

Window Menu 3-9

Help Menu 3-9

Contents

Cisco ASA 5500 Series Configuration Guide using ASDM

OL-20339-01

Toolbar 3-10

ASDM Assistant 3-10

Status Bar 3-11

Connection to Device 3-11

Device List 3-11

Common Buttons 3-12

Keyboard Shortcuts 3-13

Enabling Extended Screen Reader Support 3-14

Organizational Folder 3-15

About the Help Window 3-15

Header Buttons 3-15

Browser Window 3-15

Home Pane (Single Mode and Context) 3-16

Device Dashboard Tab 3-16

Device Information Pane 3-17

Interface Status Pane 3-17

VPN Sessions Pane 3-17

Failover Status Pane 3-18

System Resources Status Pane 3-18

Traffic Status Pane 3-18

Latest ASDM Syslog Messages Pane 3-18

Firewall Dashboard Tab 3-19

Traffic Overview Pane 3-20

Top 10 Access Rules Pane 3-20

Top Usage Status Pane 3-20

Top Ten Protected Servers Under SYN Attack Pane 3-21

Top 200 Hosts Pane 3-21

Top Botnet Traffic Filter Hits Pane 3-21

Content Security Tab 3-21

Intrusion Prevention Tab 3-22

Home Pane (System) 3-24

CHAPTER

4 Managing Feature Licenses 4-1

Supported Feature Licenses Per Model 4-1

Licenses Per Model 4-2

License Notes 4-9

VPN License and Feature Compatibility 4-11

Information About Feature Licenses 4-11

Contents

Cisco ASA 5500 Series Configuration Guide using ASDM

OL-20339-01

Preinstalled License 4-12

Permanent License 4-12

Time-Based Licenses 4-12

Time-Based License Activation Guidelines 4-12

How the Time-Based License Timer Works 4-12

How Permanent and Time-Based Licenses Combine 4-13

Stacking Time-Based Licenses 4-14

Time-Based License Expiration 4-14

Shared SSL VPN Licenses 4-14

Information About the Shared Licensing Server and Participants 4-15

Communication Issues Between Participant and Server 4-16

Information About the Shared Licensing Backup Server 4-16

Failover and Shared Licenses 4-17

Maximum Number of Participants 4-18

Failover Licenses 4-19

Failover License Requirements 4-19

How Failover Licenses Combine 4-19

Loss of Communication Between Failover Units 4-20

Upgrading Failover Pairs 4-20

Licenses FAQ 4-20

Guidelines and Limitations 4-21

Viewing Your Current License 4-23

Obtaining an Activation Key 4-23

Activating or Deactivating Keys 4-24

Configuring a Shared License 4-25

Configuring the Shared Licensing Server 4-25

Configuring the Shared Licensing Participant and the Optional Backup Server 4-26

Monitoring the Shared License 4-27

Feature History for Licensing 4-27

CHAPTER

5 Configuring the Transparent or Routed Firewall 5-1

Configuring the Firewall Mode 5-1

Information About the Firewall Mode 5-1

Information About Routed Firewall Mode 5-2

Information About Transparent Firewall Mode 5-2

Licensing Requirements for the Firewall Mode 5-4

Default Settings 5-4

Guidelines and Limitations 5-5

Setting the Firewall Mode 5-7

Contents

vii

Cisco ASA 5500 Series Configuration Guide using ASDM

OL-20339-01

Configuring ARP Inspection for the Transparent Firewall 5-8

Information About ARP Inspection 5-8

Licensing Requirements for ARP Inspection 5-8

Default Settings 5-9

Guidelines and Limitations 5-9

Configuring ARP Inspection 5-9

Task Flow for Configuring ARP Inspection 5-9

Adding a Static ARP Entry 5-9

Enabling ARP Inspection 5-10

Feature History for ARP Inspection 5-11

Customizing the MAC Address Table for the Transparent Firewall 5-11

Information About the MAC Address Table 5-11

Licensing Requirements for the MAC Address Table 5-12

Default Settings 5-12

Guidelines and Limitations 5-12

Configuring the MAC Address Table 5-13

Adding a Static MAC Address 5-13

Disabling MAC Address Learning 5-13

Feature History for the MAC Address Table 5-14

Firewall Mode Examples 5-14

How Data Moves Through the Security Appliance in Routed Firewall Mode 5-14

An Inside User Visits a Web Server 5-15

An Outside User Visits a Web Server on the DMZ 5-16

An Inside User Visits a Web Server on the DMZ 5-17

An Outside User Attempts to Access an Inside Host 5-18

A DMZ User Attempts to Access an Inside Host 5-19

How Data Moves Through the Transparent Firewall 5-20

An Inside User Visits a Web Server 5-21

An Inside User Visits a Web Server Using NAT 5-22

An Outside User Visits a Web Server on the Inside Network 5-23

An Outside User Attempts to Access an Inside Host 5-24

PART

2 Setting up the Adaptive Security Appliance

CHAPTER

6 Configuring Multiple Context Mode 6-1

Information About Security Contexts 6-1

Common Uses for Security Contexts 6-2

Context Configuration Files 6-2

Context Configurations 6-2

Contents

viii

Cisco ASA 5500 Series Configuration Guide using ASDM

OL-20339-01

System Configuration 6-2

Admin Context Configuration 6-2

How the Security Appliance Classifies Packets 6-3

Valid Classifier Criteria 6-3

Classification Examples 6-4

Cascading Security Contexts 6-6

Management Access to Security Contexts 6-7

System Administrator Access 6-7

Context Administrator Access 6-8

Information About Resource Management 6-8

Resource Limits 6-8

Default Class 6-9

Class Members 6-10

Information About MAC Addresses 6-11

Default MAC Address 6-11

Interaction with Manual MAC Addresses 6-11

Failover MAC Addresses 6-11

MAC Address Format 6-11

Licensing Requirements for Multiple Context Mode 6-12

Guidelines and Limitations 6-12

Default Settings 6-13

Configuring Multiple Contexts 6-13

Task Flow for Configuring Multiple Context Mode 6-13

Enabling or Disabling Multiple Context Mode 6-14

Enabling Multiple Context Mode 6-14

Restoring Single Context Mode 6-14

Configuring a Class for Resource Management 6-15

Configuring a Security Context 6-17

Automatically Assigning MAC Addresses to Context Interfaces 6-19

Monitoring Security Contexts 6-20

Monitoring Context Resource Usage 6-20

Viewing Assigned MAC Addresses 6-21

Viewing MAC Addresses in the System Configuration 6-21

Viewing MAC Addresses Within a Context 6-22

Feature History for Multiple Context Mode 6-23

CHAPTER

7 Using the Startup Wizard 7-1

Information About the Startup Wizard 7-1

Licensing Requirements for the Startup Wizard 7-1

Contents

Cisco ASA 5500 Series Configuration Guide using ASDM

OL-20339-01

Prerequisites for the Startup Wizard 7-2

Guidelines and Limitations 7-2

Startup Wizard Screens for ASA 5500 Series Adaptive Security Appliances 7-3

Startup Wizard Screens for the ASA 5505 Adaptive Security Appliance 7-3

Step 1 - Starting Point or Welcome 7-4

Step 2 - Basic Configuration 7-5

Step 3 - Time Zone and Clock Configuration 7-5

Step 4 - Auto Update Server 7-6

Step 5 - Management IP Address Configuration 7-6

Step 6 - Interface Selection 7-6

Step 7 - Switch Port Allocation 7-7

Step 8 - Interface IP Address Configuration 7-8

Step 9 - Internet Interface Configuration - PPPoE 7-8

Step 10 - Business Interface Configuration - PPPoE 7-9

Step 11 - Home Interface Configuration - PPPoE 7-10

Step 12 - General Interface Configuration 7-10

Step 13 - Static Routes 7-11

Adding or Editing Static Routes 7-11

Step 14 - DHCP Server 7-11

Step 15 - Address Translation (NAT/PAT) 7-12

Step 16 - Administrative Access 7-13

Adding or Editing Administrative Access Entry 7-13

Step 17 - Easy VPN Remote Configuration 7-14

Step 18 - Startup Wizard Summary 7-16

Other Interfaces Configuration 7-16

Editing Interfaces 7-16

Configuring IPv6 Neighbor Discovery 7-18

Configuring Neighbor Solicitation Messages 7-18

Configuring the Neighbor Solicitation Message Interval 7-19

Configuring the Neighbor Reachable Time 7-19

Configuring DAD Settings 7-20

Configuring IPv6 Addresses on an Interface 7-21

Configuring IPv6 Prefixes on an Interface 7-21

Configuring Router Advertisement Messages 7-22

Configuring the Router Advertisement Transmission Interval 7-23

Configuring the Router Lifetime Value 7-24

Suppressing Router Advertisement Messages 7-25

Configuring IPv6 Static Neighbors 7-25

Adding an IPv6 Static Neighbor 7-25

Contents

Cisco ASA 5500 Series Configuration Guide using ASDM

OL-20339-01

Editing Static Neighbors 7-26

Deleting Static Neighbors 7-26

Viewing and Clearing Dynamic Neighbors 7-27

Interface Configuration 7-27

Outside Interface Configuration - PPPoE 7-27

Outside Interface Configuration 7-28

Feature History for the Startup Wizard 7-29

CHAPTER

8 Configuring Interfaces 8-1

Information About Interfaces 8-1

ASA 5505 Interfaces 8-2

Understanding ASA 5505 Ports and Interfaces 8-2

Maximum Active VLAN Interfaces for Your License 8-2

VLAN MAC Addresses 8-4

Power over Ethernet 8-4

Monitoring Traffic Using SPAN 8-4

ASA 5580 Interfaces 8-5

Auto-MDI/MDIX Feature 8-5

Security Levels 8-5

Dual IP Stack 8-6

Management Interface (ASA 5510 and Higher) 8-6

Licensing Requirements for Interfaces 8-6

Guidelines and Limitations 8-7

Default Settings 8-8

Starting Interface Configuration (ASA 5510 and Higher) 8-9

Task Flow for Starting Interface Configuration 8-9

Enabling the Physical Interface and Configuring Ethernet Parameters 8-10

Configuring a Redundant Interface 8-12

Changing the Active Interface 8-14

Configuring VLAN Subinterfaces and 802.1Q Trunking 8-14

Assigning Interfaces to Contexts and Automatically Assigning MAC Addresses (Multiple Context

Mode)

8-16

Starting Interface Configuration (ASA 5505) 8-16

Task Flow for Starting Interface Configuration 8-16

Configuring VLAN Interfaces 8-17

Configuring and Enabling Switch Ports as Access Ports 8-18

Configuring and Enabling Switch Ports as Trunk Ports 8-19

Completing Interface Configuration (All Models) 8-21

Contents

Cisco ASA 5500 Series Configuration Guide using ASDM

OL-20339-01

Task Flow for Completing Interface Configuration 8-21

Configuring General Interface Parameters 8-22

PPPoE IP Address and Route Settings 8-25

Configuring Advanced Interface Parameters 8-26

Configuring IPv6 Addressing 8-27

Configuring the Link-Local Address on an Interface (Transparent Firewall Mode) 8-30

Allowing Same Security Level Communication 8-31

Enabling Jumbo Frame Support (ASA 5580, Multiple Mode) 8-32

Monitoring Interfaces 8-32

ARP Table 8-33

DHCP 8-33

DHCP Server Table 8-33

DHCP Client Lease Information 8-33

DHCP Statistics 8-35

MAC Address Table 8-35

Dynamic ACLs 8-36

Interface Graphs 8-36

Graph/Table 8-38

PPPoE Client 8-39

Interface Connection 8-39

Track Status for 8-39

Monitoring Statistics for 8-39

Feature History for Interfaces 8-40

CHAPTER

9 Configuring Basic Settings 9-1

Configuring the Hostname, Domain Name, and Passwords 9-1

Setting the Date and Time 9-2

Setting the Date and Time Using an NTP Server 9-3

Add/Edit NTP Server Configuration 9-3

Setting the Date and Time Manually 9-5

Configuring HTTP Redirect 9-5

Edit HTTP/HTTPS Settings 9-6

Configuring the Master Passphrase 9-6

Information About the Master Passphrase 9-6

Licensing Requirements for the Master Passphrase 9-7

Guidelines and Limitations 9-7

Adding or Changing the Master Passphrase 9-7

Disabling the Master Passphrase 9-8

Recovering the Master Passphrase 9-9

Contents

xii

Cisco ASA 5500 Series Configuration Guide using ASDM

OL-20339-01

Feature History for the Master Passphrase 9-9

Configuring the DNS Server 9-10

Defining ASDM Preferences 9-11

Using the ASDM Assistant 9-13

Enabling History Metrics 9-13

Setting the Management IP Address for a Transparent Firewall 9-14

Information About the Management IP Address 9-14

Licensing Requirements for the Management IP Address for a Transparent Firewall 9-14

Guidelines and Limitations 9-14

Configuring the IPv4 Address 9-15

Configuring the IPv6 Address 9-16

Configuring the Global Address 9-16

Configuring the Link-Local Addresses Automatically 9-17

Configuring DAD Settings 9-17

Feature History for the Management IP Address for a Transparent Firewall 9-18

CHAPTER

10 Configuring DHCP 10-1

Information About DHCP 10-1

Licensing Requirements for DHCP 10-1

Guidelines and Limitations 10-2

Configuring DHCP Relay Services 10-2

Editing DHCP Relay Agent Settings 10-4

Adding or Editing Global DHCP Relay Server Settings 10-4

Configuring a DHCP Server 10-5

Editing DHCP Servers 10-6

Configuring Advanced DHCP Options 10-7

DHCP Monitoring 10-8

Feature History for DHCP 10-9

CHAPTER

11 Configuring Dynamic DNS 11-1

Information about DDNS 11-1

Licensing Requirements for DDNS 11-1

Guidelines and Limitations 11-2

Configuring Dynamic DNS 11-2

DDNS Monitoring 11-4

Feature History for DDNS 11-4

Contents

xiii

Cisco ASA 5500 Series Configuration Guide using ASDM

OL-20339-01

CHAPTER

12 Configuring Web Cache Services Using WCCP 12-1

Information About WCCP 12-1

Guidelines and Limitations 12-1

Licensing Requirements for WCCP 12-2

Configuring WCCP Service Groups 12-3

Adding or Editing WCCP Service Groups 12-3

Configuring Packet Redirection 12-4

Adding or Editing Packet Redirection 12-4

WCCP Monitoring 12-4

Feature History for WCCP 12-5

CHAPTER

13 Configuring Objects 13-1

Configuring Network Objects and Groups 13-1

Network Object Overview 13-2

Configuring a Network Object 13-2

Configuring a Network Object Group 13-3

Using Network Objects and Groups in a Rule 13-4

Viewing the Usage of a Network Object or Group 13-4

Configuring Service Objects and Service Groups 13-5

Information about Service Objects and Service Groups 13-5

Adding and Editing a Service Object 13-6

Adding a Service Object 13-6

Editing a Service Object 13-6

Adding and Editing a Service Group 13-7

Adding a Service Group 13-7

Editing a Service Group 13-8

Browse Service Groups 13-9

Licensing Requirements for Objects and Groups 13-9

Guidelines and Limitations for Objects and Groups 13-10

Configuring Regular Expressions 13-10

Creating a Regular Expression 13-10

Building a Regular Expression 13-13

Testing a Regular Expression 13-14

Creating a Regular Expression Class Map 13-15

Configuring Time Ranges 13-15

Add/Edit Time Range 13-16

Adding a Time Range to an Access Rule 13-16

Add/Edit Recurring Time Range 13-18

Contents

xiv

Cisco ASA 5500 Series Configuration Guide using ASDM

OL-20339-01

CHAPTER

14 Configuring Public Servers 14-1

Public Server Overview 14-1

Adding a Public Server 14-2

Adding a Public Server that Enables Static NAT 14-2

Adding a Public Server that Enables Static NAT with Port Address Translation 14-2

Editing a Public Server 14-3

PART

3 Configuring ACLs

CHAPTER

15 Using the ACL Manager 15-1

Standard ACL 15-1

Extended ACL 15-2

Add/Edit/Paste ACE 15-3

CHAPTER

16 Adding a WebtypeACL 16-1

Licensing Requirements for Webtype ACLs 16-1

Guidelines and Limitations 16-1

Default Settings 16-2

Using Webtype ACLs 16-2

Task Flow for Configuring Webtype ACLs 16-2

Adding a Webtype ACL and ACE 16-2

Editing Webtype ACLs and ACEs 16-4

Deleting Webtype ACLs and ACEs 16-5

Feature History for Webtype Access Lists 16-5

CHAPTER

17 Adding a StandardACL 17-1

Information About Standard ACLs 17-1

Licensing Requirements for Standard ACLs 17-1

Guidelines and Limitations 17-1

Default Settings 17-2

Adding Standard ACLs 17-2

Using Standard ACLs 17-3

Adding a Standard ACL 17-3

Adding an ACE to a Standard ACL 17-3

Editing an ACE in a Standard ACL 17-4

Feature History for Standard ACLs 17-4

Contents

Cisco ASA 5500 Series Configuration Guide using ASDM

OL-20339-01

PART

4 Configuring IP Routing

CHAPTER

18 Information About Routing 18-1

Information About Routing 18-1

Switching 18-1

Path Determination 18-2

Supported Route Types 18-2

Static Versus Dynamic 18-2

Single-Path Versus Multipath 18-3

Flat Versus Hierarchical 18-3

Link-State Versus Distance Vector 18-3

How Routing Behaves Within the Adaptive Security Appliance 18-4

Egress Interface Selection Process 18-4

Next Hop Selection Process 18-4

Supported Internet Protocols for Routing 18-5

Information About the Routing Table 18-5

Displaying the Routing Table 18-5

How the Routing Table Is Populated 18-6

Backup Routes 18-7

How Forwarding Decisions are Made 18-7

Dynamic Routing and Failover 18-8

Information About IPv6 Support 18-8

Features that Support IPv6 18-9

IPv6-Enabled Commands 18-9

IPv6 Command Guidelines in Transparent Firewall Mode 18-10

Entering IPv6 Addresses in Commands 18-10

Disabling Proxy ARPs 18-11

CHAPTER

19 Configuring Static and Default Routes 19-1

Information About Static and Default Routes 19-1

Licensing Requirements for Static and Default Routes 19-2

Guidelines and Limitations 19-2

Configuring Static and Default Routes 19-2

Configuring a Static Route 19-3

Add/Edit a Static Route 19-3

Configuring Static Route Tracking 19-6

Deleting Static Routes 19-6

Configuring a Default Static Route 19-7

Contents

xvi

Cisco ASA 5500 Series Configuration Guide using ASDM

OL-20339-01

Limitations on Configuring a Default Static Route 19-7

Configuring IPv6 Default and Static Routes 19-8

Monitoring a Static or Default Route 19-8

Configuration Examples for Static or Default Routes 19-9

Feature History for Static and Default Routes 19-9

CHAPTER

20 Defining Route Maps 20-1

Route Maps Overview 20-1

Permit and Deny Clauses 20-2

Match and Set Clause Values 20-2

Licensing Requirements for Route Maps 20-3

Guidelines and Limitations 20-3

Defining a Route Map 20-4

Add/Edit a Route Map 20-4

Customizing a Route Map 20-5

Defining a Route to Match a Specific Destination Address 20-5

Configuring the Metric Values for a Route Action 20-6

Configuration Example for Route Maps 20-7

Feature History for Route Maps 20-7

CHAPTER

21 Configuring OSPF 21-1

Information About OSPF 21-1

Licensing Requirements for OSPF 21-3

Guidelines and Limitations 21-3

Configuring OSPF 21-3

Customizing OSPF 21-4

Redistributing Routes Into OSPF 21-5

Configuring Route Summarization When Redistributing Routes into OSPF 21-7

Add a Route Summary Address 21-7

Add/Edit OSPF Summary Address 21-8

Configuring Route Summarization Between OSPF Areas 21-8

Configuring OSPF Interface Parameters 21-9

Configuring OSPF Area Parameters 21-12

Configuring OSPF NSSA 21-13

Defining Static OSPF Neighbors 21-14

Configuring Route Calculation Timers 21-15

Logging Neighbors Going Up or Down 21-16

Configuring Filtering in OSPF 21-16

Contents

xvii

Cisco ASA 5500 Series Configuration Guide using ASDM

OL-20339-01

Configuring a Virtual Link in OSPF 21-17

Restarting the OSPF Process 21-19

Configuration Example for OSPF 21-19

Monitoring OSPF 21-20

Feature History for OSPF 21-21

CHAPTER

22 Configuring RIP 22-1

Overview 22-1

Routing Update Process 22-2

RIP Routing Metric 22-2

RIP Stability Features 22-2

RIP Timers 22-2

Licensing Requirements for RIP 22-2

Guidelines and Limitations 22-3

Configuring RIP 22-3

Enabling RIP 22-4

Customizing RIP 22-5

Configure the RIP Version 22-5

Configuring Interfaces for RIP 22-6

Editing a RIP Interface 22-6

Configuring the RIP Send and Receive Version on an Interface 22-7

Configuring Route Summarization 22-8

Filtering Networks in RIP 22-9

Adding or Editing a Filter Rule 22-10

Redistributing Routes into the RIP Routing Process 22-10

Enabling RIP Authentication 22-11

Restarting the RIP Process 22-12

Monitoring RIP 22-12

Configuration Example for RIP 22-13

Feature History for RIP 22-13

CHAPTER

23 Configuring EIGRP 23-1

Overview 23-1

Licensing Requirements for EIGRP 23-2

Guidelines and Limitations 23-2

Task List to Configure an EIGRP Process 23-3

Configuring EIGRP 23-3

Contents

xviii

Cisco ASA 5500 Series Configuration Guide using ASDM

OL-20339-01

Enabling EIGRP 23-4

Enabling EIGRP Stub Routing 23-5

Customizing EIGRP 23-6

Defining a Network for an EIGRP Routing Process 23-7

Configuring Interfaces for EIGRP 23-7

Configuring Passive Interfaces 23-8

Configuring the Summary Aggregate Addresses on Interfaces 23-9

Changing the Interface Delay Value 23-10

Enabling EIGRP Authentication on an Interface 23-10

Defining an EIGRP Neighbor 23-11

Redistributing Routes Into EIGRP 23-12

Filtering Networks in EIGRP 23-13

Customizing the EIGRP Hello Interval and Hold Time 23-15

Disabling Automatic Route Summarization 23-15

Configuring Default Information in EIGRP 23-16

Disabling EIGRP Split Horizon 23-17

Restarting the EIGRP Process 23-18

Monitoring EIGRP 23-18

Configuration Example for EIGRP 23-18

Feature History for EIGRP 23-20

CHAPTER

24 Configuring Multicast Routing 24-1

Information About Multicast Routing 24-1

Stub Multicast Routing 24-2

PIM Multicast Routing 24-2

Multicast Group Concept 24-2

Multicast Addresses 24-2

Licensing Requirements for Multicast Routing 24-2

Guidelines and Limitations 24-3

Enabling Multicast Routing 24-3

Customizing Multicast Routing 24-4

Configuring Stub Multicast Routing 24-4

Configuring a Static Multicast Route 24-4

Configuring IGMP Features 24-5

Disabling IGMP on an Interface 24-6

Configuring IGMP Group Membership 24-6

Configuring a Statically Joined IGMP Group 24-7

Controlling Access to Multicast Groups 24-8

Limiting the Number of IGMP States on an Interface 24-8

Contents

xix

Cisco ASA 5500 Series Configuration Guide using ASDM

OL-20339-01

Modifying the Query Messages to Multicast Groups 24-9

Changing the IGMP Version 24-9

Configuring PIM Features 24-10

Enabling and Disabling PIM on an Interface 24-10

Configuring a Static Rendezvous Point Address 24-11

Configuring the Designated Router Priority 24-12

Configuring and Filtering PIM Register Messages 24-12

Configuring PIM Message Intervals 24-13

Configuring a Route Tree 24-13

Configuring a Multicast Group 24-14

Filtering PIM Neighbors 24-14

Configuring a Bidirectional Neighbor Filter 24-15

Configuring a Multicast Boundary 24-16

Configuration Example for Multicast Routing 24-17

Additional References 24-18

Related Documents 24-19

RFCs 24-19

Feature History for Multicast Routing 24-19

CHAPTER

25 Configuring IPv6 Neighbor Discovery 25-1

Configuring Neighbor Solicitation Messages 25-1

Configuring the Neighbor Solicitation Message Interval 25-1

Information About Neighbor Solicitation Messages 25-2

Licensing Requirements for Neighbor Solicitation Messages 25-2

Guidelines and Limitations for the Neighbor Solicitation Message Interval 25-3

Default Settings for the Neighbor Solicitation Message Interval 25-3

Configuring the Neighbor Solicitation Message Interval 25-3

Feature History for the Neighbor Solicitation Message Interval 25-4

Configuring the Neighbor Reachable Time 25-4

Information About Neighbor Reachable Time 25-4

Licensing Requirements for Neighbor Reachable Time 25-4

Guidelines and Limitations for Neighbor Reachable Time 25-4

Default Settings for the Neighbor Reachable Time 25-5

Configuring Neighbor Reachable Time 25-5

Configuring DAD Settings 25-5

Configuring IPv6 Addresses on an Interface 25-6

Configuring IPv6 Prefixes on an Interface 25-7

Feature History for Neighbor Reachable Time 25-8

Configuring Router Advertisement Messages 25-8

Contents

Cisco ASA 5500 Series Configuration Guide using ASDM

OL-20339-01

Information About Router Advertisement Messages 25-8

Configuring the Router Advertisement Transmission Interval 25-10

Licensing Requirements for Router Advertisement Transmission Interval 25-10

Guidelines and Limitations for the Router Advertisement Transmission Interval 25-10

Default Settings for Router Advertisement Transmission Interval 25-10

Configuring Router Advertisement Transmission Interval 25-11

Feature History for the Router Advertisement Transmission Interval 25-11

Configuring the Router Lifetime Value 25-12

Licensing Requirements for the Router Lifetime Value 25-12

Guidelines and Limitations for the Router Lifetime Value 25-12

Default Settings for the Router Lifetime Value 25-12

Configuring the Router Lifetime Value 25-13

Feature History for the Router Lifetime Value 25-13

Configuring the IPv6 Prefix 25-14

Licensing Requirements for IPv6 Prefixes 25-14

Guidelines and Limitations for IPv6 Prefixes 25-14

Default Settings for IPv6 Prefixes 25-15

Configuring IPv6 Prefixes 25-15

Suppressing Router Advertisement Messages 25-16

Licensing Requirements for Suppressing Router Advertisement Messages 25-16

Guidelines and Limitations for Suppressing Router Advertisement Messages 25-16

Default Settings for Suppressing Router Advertisement Messages 25-17

Suppressing Router Advertisement Messages 25-17

Feature History for Suppressing Router Advertisement Messages 25-17

Configuring a Static IPv6 Neighbor 25-18

Information About a Static IPv6 Neighbor 25-18

Licensing Requirements for Static IPv6 Neighbor 25-18

Guidelines and Limitations 25-18

Default Settings 25-18

Configuring a Static IPv6 Neighbor 25-19

Editing Static Neighbors 25-19

Deleting Static Neighbors 25-19

Feature History for Configuring a Static IPv6 Neighbor 25-20

PART

5 Configuring Network Address Translation

CHAPTER

26 Information About NAT 26-1

Why Use NAT? 26-1

NAT Terminology 26-2

Page is loading ...

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
1351
1352
1353
1354
1355
1356
1357
1358
1359
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1371
1372
1373
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1385
1386
1387
1388
1389
1390
1391
1392
1393
1394
1395
1396
1397
1398
1399
1400
1401
1402
1403
1404
1405
1406
1407
1408
1409
1410
1411
1412
1413
1414
1415
1416
1417
1418
1419
1420
1421
1422
1423
1424
1425
1426
1427
1428
1429
1430
1431
1432
1433
1434
1435
1436
1437
1438
1439
1440
1441
1442
1443
1444
1445
1446
1447
1448
1449
1450
1451
1452
1453
1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1477
1478
1479
1480
1481
1482
1483
1484
1485
1486
1487
1488
1489
1490
1491
1492
1493
1494
1495
1496
1497
1498
1499
1500
1501
1502
1503
1504
1505
1506
1507
1508
1509
1510
1511
1512
1513
1514
1515
1516
1517
1518
1519
1520
1521
1522
1523
1524
1525
1526
1527
1528
1529
1530
1531
1532
1533
1534
1535
1536
1537
1538
1539
1540
1541
1542
1543
1544
1545
1546
1547
1548
1549
1550
1551
1552
1553
1554
1555
1556
1557
1558
1559
1560
1561
1562
1563
1564
1565
1566
1567
1568
1569
1570
1571
1572
1573
1574
1575
1576
1577
1578
1579
1580
1581
1582
1583
1584
1585
1586
1587
1588
1589
1590
1591
1592
1593
1594
1595
1596
1597
1598
1599
1600
1601
1602
1603
1604
1605
1606
1607
1608
1609
1610
1611
1612
1613
1614
1615
1616
1617
1618
1619
1620
1621
1622
1623
1624
1625
1626
1627
1628
1629
1630
1631
1632
1633
1634
1635
1636
1637
1638
1639
1640
1641
1642
1643
1644
1645
1646
1647
1648
1649
1650
1651
1652
1653
1654
1655
1656
1657
1658
1659
1660
1661
1662
1663
1664
1665
1666
1667
1668
1669
1670
1671
1672
1673
1674
1675
1676
1677
1678
1679
1680
1681
1682
1683
1684
1685
1686
1687
1688
1689
1690
1691
1692
1693
1694
1695
1696
1697
1698
1699
1700
1701
1702
1703
1704
1705
1706
1707
1708
1709
1710
1711
1712
1713
1714
1715
1716
1717
1718
1719
1720
1721
1722
1723
1724
1725
1726
1727
1728
1729
1730
1731
1732
1733
1734
1735
1736
1737
1738
1739
1740
1741
1742
1743
1744
1745
1746
1747
1748
1749
1750
1751
1752
1753
1754
1755
1756
1757
1758
1759
1760
1761
1762
1763
1764
1765
1766
1767
1768
1769
1770
1771
1772
1773
1774
1775
1776
1777
1778
1779
1780
1781
1782
1783
1784
1785
1786
1787
1788
1789
1790
1791
1792
1793
1794
1795
1796
1797
1798
1799
1800
1801
1802
1803
1804
1805
1806
1807
1808
1809
1810
1811
1812
1813
1814
1815
1816
1817
1818
1819
1820
1821
1822

Cisco Cisco ASA 5510 Configuration manual

Brand: Cisco

Model: Cisco ASA 5510

Category: Software

Type: Configuration manual

This manual is also suitable for

Download PDF

report

Cisco Cisco ASA 5510 Configuration manual

This manual is also suitable for

Cisco Cisco ASA 5510 Configuration manual

Related papers

Other documents