Lexing LX-PR109 Operating instructions

Brand
Lexing
Model
LX-PR109
Type
Operating instructions
LX-PR109 Infrared Sensor Instruction
Summary
Specifications
Sensor Information
(incorporated in class II appliance only.)
Power source: 220-240VAC
100-130VAC
Power frequency: 50/60Hz
Detection range: 8±2m Max(22°C)
Detection angle: 120°
Time setting: min:7sec±3sec
max:6min±2min(adjustable)
Light-control: <5LUX~2000LUX(adjustable)
Working temperature: –10°C ~ +40°C
Working humidity: <95%RH
Sense motion speed: 0.6m/s -1.5m/s
Rated load: 1200W Max. / 5 A tungsten (cosφ=1)(220-240VAC)
300W Max. / 2.5 A fluorescent (cosφ=0.5)(220-240VAC)
600W Max. / 2.5 A tungsten (cosφ=1)(100-130VAC)
150W Max. / 1.275 A fluorescent (cosφ=0.5)(220-240VAC)
Correct moving orientation
8±2m
120°
Detection angle
The product is an energy-saving automatic switch; it adopts integrated circuit and precise detecting
components and SMD technology. It can be on when one comes and off automatically after leaves. Its
performance is stable. It can identify day and night. The light can turn on when one enters detection field and
moves, it can turn off automatically after one leaves detection field .
(mm)
57.0
27.5
Connection-Wire Diagram
Installation
Brown
~Input
Blue Red
Output
Load
sensor
As shown by wiring connected to the power product.
Installation attention
Test
1.The light-control knob to adjust the maximum
(daytime), the time adjustment knob to the minimum;
2. And about 30s later turned into the working state,
the lamp, the hand in front of the sensor probe
window in the induction by shaking sensor signal,
the light from the light immediately, in the absence of
sustained induction under 7s ± 2s or so off;
3. Light-control knob to the minimum (night), lights
off, the hand in front of the sensor probe window
shaking, light does not shine. Opaque object (such
as cloth) cover the detection window, induction time,
lights, signals in the absence of induction lamp
under 7s ± 2s off as normal.
Notice: The lens cover can be poked up and down.
You can poke it downside to see the knob and
adjust accordingly.
Light-control knob
(adjustable)
Time setting knob
(adjustable)
1. In sense range there should not be isolation;
2. You should not install the unit facing window and where temperature change quickly (like air conditioning,
stove) to avoid working;
3. In front of sense window there should not be moving object, like hanging fan.etc.
4. If you unfamiliar with electricity, suggest electrician or experiencing human install the unit.
1The blue brown and red in diagram are
the blue wirebrown wire and red wire from
sensor;
2Connect the blue and brown with power;
3Connect the blue and red with load.
Troublesome
1. load do not work, please check:
whether the connection of power and load is correct or not;
whether the load is good or not;
whether the working light you set accord with ambient light or not.
2. Sensitivity is low, please check:
whether in front of sense window there is isolation to affect sensor receiving signal or not;
whether ambient temperature is too high or not;
whether sense signal source is in sense range or not;
3. Sensor can not shut off load, please check:
whether there is continual sensing signal in sense range or not;
Whether power accord with specification required or not;
Whether temperature near sensor changes quickly, for example: air conditioning, heater, etc.
Warning!
● Please confirm with prefessional installation.
● Please cut off power supply before installation and removal operations.
● Make sure that you have cut off the power for safety purposes.
● Improper operation caused losses, the manufacturer does not undertake any responsibility.
We are committed to promoting the product quality and reliability, however, all the electronic
components have certain probabilities to become ineffective, which will cause some
troubles.When designing, we have paid attention to redundant designs and adopted safety
quota to avoid any troubles.
This instruction, without our permission, should not be copied for any other purposes.
  • Page 1 1
  • Page 2 2
  • Page 3 3

Lexing LX-PR109 Operating instructions

Brand
Lexing
Model
LX-PR109
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents