Sterling Plumbing 71110112, 71110122, AFD Bath/Shower System 71110122 User manual

  • Hello! I am an AI chatbot trained to assist you with the Sterling Plumbing 71110112 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Features
Compression molded from Sterling’s exclusive solid
Vikrell
®
material
Gentle sloping back, neck, and armrest in bath
design
Above floor drain rough-in
Factory installed Vikrell
®
apron extension and plastic
undersupport for ease of installation
Modular 4-piece design
Lightly pebbled bottom surface for sure footing
Tongue-and-groove snap together design
Durable high gloss finish
18-1/4 (46.4 cm) bath depth (floor to top of dam)
60 (152.4 cm) x 43-1/2 (110.5 cm) x 75-1/2
(191.8 cm) complete unit rough-in dimensions include
flanges
60 (152.4 cm) x 42 (106.7 cm) x 74-1/4 (188.6 cm)
complete unit finished dimensions
Codes/Standards Applicable
Specified model meets or exceeds the following:
ANSI Z124.1.2
ASTM E162
ASTM E662
IAPMO/UPC
CSA International
CSA B45
42 (106.7 cm) AFD BATH/SHOWER
SYSTEM
71110112
ALSO 71110122
Colors/Finishes
0: White
Other: Refer to Price Book for additional colors/finishes
Specified Model
Model Complete Unit Description Colors/Finishes
71110112 42 (106.7 cm) AFD bath and wall surround, left drain 0 Other_____
71110122 42 (106.7 cm) AFD bath and wall surround, right drain 0 Other_____
Model Wall Component Description Colors/Finishes
71112100 Back wall 0 Other_____
71113110 Left end wall 0 Other_____
71113120 Right end wall 0 Other_____
71114100 Complete wall set 0 Other_____
71115100 End wall set 0 Other_____
ENSEMBLETM
SterlingPlumbing.com
Visit us online for fixture color choices, detailed product information, color photos, installation instructions, care
guides, and warranties. Sterling offers additional lines of plumbing products to complement the Sterling product
you’ve chosen. Sign up for the Sterling monthly e-newsletter which showcases our latest product innovations. You
may also call our Sterling Plumbing Answer Center from within the USA at 1-888-STERLING in addition to
consulting with your local dealer. Sterling. Strong. Professional. Design.
Page 1 of 2
1021860-4-
E
Technical Information
Fixture*: basin area top area
Bathing well 40 (101.6 cm) x
27 (68.6 cm)
52 (132.1 cm) x
35 (88.9 cm)
To overflow water depth capacity
11 (27.9 cm) 55 gal (208.2 L)
* Approximate measurements for comparison only.
Model door maximum
width
door maximum
height
71110112
71110122
58-1/2 (148.6 cm) 56 (142.2 cm)
Installation Notes
Install this product according to the installation guide.
Size the drain hole clearance to fit the drain assembly that will
be used.
Stud positioning is critical.
Studs should be positioned roughly as shown for support clip
or roofing nail installation.
60" (152.4 cm)
43-1/2"
(110.5 cm)
42"
(106.7 cm)
3"
(7.6 cm)
53"
(134.6 cm)
75-1/2"
(191.8 cm)
1-1/2"
(3.8 cm)
3" (7.6 cm)
Drain Bottom
to Floor
21-1/4"
(54 cm)
22-1/4"
(56.5 cm)
18-1/4"
(46.4 cm)
1-1/4" (3.2 cm)
71110122
3-1/2" (8.9 cm)
43-1/2"
(110.5 cm)
6" (15.2 cm)
(Typical)
14"
(35.6 cm)
14"
(35.6 cm)
16"
(40.6 cm)
27-1/2"
(69.9 cm)
8"
(20.3 cm)
4"
(10.2 cm)
8-3/4"
(22.2 cm)
2" (5.1 cm) D. Drain
20-1/4"
(51.4 cm)
11-1/2"
(29.2 cm)
60" (152.4 cm) Min
60-1/8" (152.7 cm) Max
30" (76.2 cm)
Recommended Support
Clip or Roofing Nail
Location (5 Total)
2" (5.1 cm) Minimum Drain
Hole Clearance Through Wall
3-1/8" (7.9 cm)
Overflow
Detail
Product Diagram
ENSEMBLETM
ENSEMBLETM 42 (106.7 cm) AFD BATH/SHOWER SYSTEM
Page2of2
1021860-4-
E
/