Sterling 71100112-0 Dimensions Guide

Type
Dimensions Guide
Features
Compression molded from our exclusive solid Vikrell
®
material
Gentle sloping back, neck, and armrest in bath
design
Above-floor-drain (AFD) rough-in
Factory installed injection molded apron extension
and undersupport structure
Tongue-and-groove 4-piece modular design allows for
easy snap together installation
Durable high-gloss finish
10-year consumer/3-year commercial limited warranty
18-1/4 (464 mm) bath depth (floor to top of
threshold)
60-1/4 (1530 mm) x 37-1/2 (953 mm) x 75-1/2
(1918 mm) complete unit rough-in dimensions include
flange
60 (1524 mm) x 36 (914 mm) x 74-1/4 (1886 mm)
complete unit finished dimensions
Codes/Standards Applicable
Specified model meets or exceeds the following:
ASTM E162
ASTM E662
CSA B45.5/IAPMO Z124
36 (914 mm) AFD BATH AND WALL
SURROUND
71100112
ALSO 71100119, 71100122, 71100129
Colors/Finishes
0: White
Other: Refer to Price Book for additional colors/finishes
Specified Model
Model Complete Unit Description Colors/Finishes
71100112 36 (914 mm) AFD bath and wall surround, left drain 0 Other_____
71100119 36 (914 mm) AFD bath/shower with access panel system, left drain 0 Other_____
71100122 36 (914 mm) AFD bath and wall surround, right drain (shown) 0 Other_____
71100129 36 (914 mm) AFD bath/shower with access panel system, right drain 0 Other_____
Model Wall Component Description Colors/Finishes
71104100 Complete wall set 0 Other_____
ENSEMBLETM
Page 1 of 2
1021859-4-
K
For more information
visit SterlingPlumbing.com
or call 1-800-STERLING
Technical Information
Fixture*:
Basin area:
Bathing well 40 (1016 mm) x 21 (533 mm)
Top area 52 (1321 mm) x 29 (737 mm)
To overflow:
Water depth 11 (279 mm)
Capacity 40 gal (151.4 L)
* Approximate measurements for comparison only.
Model Door width Door maximum
height
All 58-1/2 (1486 mm) 55-3/4 (1416 mm)
Installation Notes
Install this product according to the installation guide.
Size the drain hole clearance to fit the drain assembly that will
be used.
End stud positioning is critical.
Studs should be positioned roughly as shown.
30" (762 mm)
3-1/8" (79 mm)
Overflow
Detail
1-1/4"
(32 mm)
37-1/2"
(953 mm)
24-1/2"
(622 mm)
4"
(102 mm)
8"
(203 mm)
53"
(1346 mm)
75-1/2"
(1918 mm)
3"
(76 mm)
18-1/4"
(464 mm)
60"
(1524 mm)
1-1/2"
(38 mm)
19"
(483 mm)
20"
(508 mm)
36"
(914 mm)
16"
(406 mm)
14"
(356 mm)
6" (152 mm)
(Typical)
37-1/2"
(953 mm)
2" (51 mm) Minimum Drain
Hole Clearance Through Wall
Ø 2" (51 mm) Drain
8-3/4"
(222 mm)
60-1/8" (1527 mm) Min
60-1/4" (1530 mm) Max
17-1/4"
(438 mm)
8-3/4"
(222 mm)
14"
(356 mm)
3" (76 mm) Drain
Bottom to Floor
3-1/2" (89 mm)
Recommended Support Clip
Location (4 Total)
Product Diagram
ENSEMBLETM
ENSEMBLETM 36 (914 mm) AFD BATH AND WALL SURROUND
Page2of2
1021859-4-
K
  • Page 1 1
  • Page 2 2

Sterling 71100112-0 Dimensions Guide

Type
Dimensions Guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI