ActionTec R1524SU Quick start guide

Brand: ActionTec

Model: R1524SU

Category: Gateways/controllers

Type: Quick start guide

This manual is also suitable for

DSL Gateway

ActionTec R1524SU is an all-in-one internet access solution that supports a wide range of connection types, including PPPoE, PPPoA, and DHCP. With the ability to handle multiple protocols, the R1524SU provides a versatile gateway for connecting multiple devices to the internet. One of the key features of this device is its built-in support for DSL, making it ideal for users with a DSL internet connection. The R1524SU supports both PPPoE and PPPoA DSL connection types, providing flexibility and compatibility with a variety of DSL providers.

Step 1 Unplug all of the existing Phone

Cords

from their current Phone Jacks.

Step 2 Plug a Phone Filter into every

Phone Jack in your home.

Note: DO NOT plug a Phone Filter into the Jack on the wall near your computer.

Step 3 Plug the loose end of the existing

Phone Cord into a Phone Filter and

keep the other end connected to the

Phone (or fax machine,caller ID,or

answering machine) itself.

If you want to have a Phone next to your Computer:

Step 4 Find the Phone Cord that is

connected to the

Telephone next to

your Computer.Unplug this Phone Cord

from the Phone Jack that it is currently

plugged into.Keep the other end

connected to the Telephone itself.

Note: DO NOT unplug the DSL Cable from the Phone Jack near your computer.

Phone

Jack

Phone

Cord

Note: DO NOT unplug the DSL Cable from the Phone Jack near your computer.

These instructions will change based on your location.

If you are located in the United States,please go to the "U.S.

Customers ONLY" section.

If you are NOT located in the United States, please go to the

"Non-U.S.Customers ONLY" section.

Note: If the Internet light continues to blink, confirm that you have received

notification from your DSL Provider that your DSL service is ON. Otherwise,

contact your DSL Provider immediately.

Connect the DSL Gateway

Connect the Filters

Step 1 Get your DSL Gateway from

your DSL Quick Start Kit and take it out

of the bag.

Step 4 Plug the larger end of the Power

Cord

into a Power Outlet.

Step 5 Confirm that the Power light

on the DSL Gateway is GREEN.This

may take a few moments.

Step 10 Now get the black DSL Cable.

Step 10 Plug one end of the DSL Cable

into the GREEN Port, labeled “Line”, which

is located on the back of the DSL

Gateway.

Step 11 Plug the other end of the DSL

Cable

into the Phone Jack closest to

your computer.

Step 12 Confirm that the Internet light

on the DSL Gateway is SOLID GREEN.

(This may take up to 30 seconds.)

Step 9 Confirm that the Power and one

of the

Ethernet Network lights on the

Cable/DSL Router are SOLID

GREEN.

(This may take a few moments and the

Gateway light may flash.)

U.S Customers ONLY

Phone Filters are connected to all of the Phone Jacks in your

home to allow you to talk on the phone and be online at the

same time.Every phone in your home with the same phone

number as your DSL line will need a Phone Filter.

Get the CLEAR Bag and take out the Phone Filters.

Step 2 Get the BLACK bag and remove

the

Power Cord and black DSL Cable

from the bag.

Step 3 Plug the smaller end of the

Power Cord into the Black Port located

on the back of the DSL Gateway.

This port is circular and marked “Power”.

Note: The number and type of Phone Filters included in this kit may vary.It is

dependent on your Internet Service Provider.

Home Security Alarm Notice

If you have a monitored home security alarm,

please contact your Security System Provider to

schedule a visit to your home for installation of a

Phone Filter on the Alarm.

Step 6 Get the Yellow Cable from your

DSL Quick Start Kit.

Step 7 Connect one end of the Yellow

Cable

into the Yellow Port on the back

of your DSL Gateway.You will hear a

“click” when the Yellow Cable has been

connected properly.

You can plug the Yellow Cable into any

open Yellow Port.

Step 8 Plug the loose end of the Yellow

Cable

into the Ethernet Port located

on the back of your computer.You will

hear a “click”when the Yellow Cable has

been connected properly.

The Ethernet Port looks similar to a regular

Phone Jack but is slightly larger.

Please flip this Guide over now.

Stock# 0530-0405-000

Note: The pictures included in this Section are for the 4-port DSL Gateway.,If you have

a DSL Gateway with 1 Yellow Port,some of the pictures may not match your installation.

Quick Start Guide

DSL Gateway

Connect the DSL Gateway

Connect the Filters

Configure the DSL Gateway

Note: You should use this Quick Start Guide only if you are connecting

the DSL Gateway via Ethernet and were unable to use the

Actiontec

Installation Buddy CD-ROM. If you want to connect the Gateway

via USB,you must run the Installation Buddy CD-ROM.

This Quick Start Guide will walk you through the

easy steps to set up your DSL Gateway. During this

process,we'll show you how to:

You will need the following items from the

Actiontec DSL Quick Start Kit:

DSL Gateway

Black Bag

Clear Bag

Yellow Cable

Note: DO NOT unplug the black DSL Cable from the Phone Jack near your computer.

Non-U.S Customers

DSL Filters are connected to all of the

Phone Jacks in your home to allow you

to talk on the phone and be online at

the same time. Every phone in your

home with the same phone number as

your DSL line will need a DSL Filter.

Get the DSL Filter.

DSL Filter

Step 1 Unplug all of the existing Phone

Cords

from their current Phone Jacks.

Step 1 Open the Web browser.In the

address bar, enter

http://192.168.0.1

then press Enter on the keyboard.

Phone

Jack

Telephone

Cord

Step 2 Plug a Phone Adapter into every

Phone Jack in your home.

Step 2 The “Main Menu”screen

appears. Select

Setup/Configuration.

Note: If you need additional Phone Adapters or DSL Filters,please contact your

DSL Internet Service Provider or visit a local Consumer Electronics Store.

Phone

Jack

Phone

Adapter

Step 3 Plug a DSL Filter into the Phone

Adapter

that is connected to the Phone

Jack on the wall.

Step 3 Follow the instructions in the

“Set Up/Configuration”screen, then

click

Begin Basic Setup.

Step 4 Plug the loose end of the

existing

Phone Cord into a DSL Filter

and keep the other end connected to

the Phone (or fax machine,caller ID,or

answering machine) itself.

Step 5 In the next window,select the

type of connection by clicking on the

circle next to

PPPoA or PPPoE.If unsure

about the selection, contact your ISP.

Step 4 In the next window,follow the

onscreen instructions,then click

Next.

DSL

Filter

Phone

Adapter

Telephone

Cord

Phone

Jack

DSL

Filter

Phone

Adapter

Phone

Jack

Step 6 Plug the Phone Filter into the

Phone Jack on the back of the DSL

Gateway. DO NOT plug the Phone

Filter into the back of your Computer.

Make sure that you have connected

your Phone to the DSL Gateway

EXACTLY as shown in this picture.

Step 5 Plug the loose end of the exist-

ing

Phone Cord into a Phone Filter.

Configure the DSL Gateway

To configure the gateway for basic operation.

Step 6 Enter the User Name,Password,

and

Static IP provided by the ISP in the

“DSL Broadband Connection - PPP”

screen. Click

Next.

You should only enter the information that was provided to

you by your ISP. Leave all other fields blank.

Step 7 Click Save and Restart in the

“Save and Restart”screen.

Step 8 The “Congratulations”screen

appears.The Gateway is successfully

configured.

Note: If the ISP uses a connection method other than PPPoE (DHCP or Static IP,

for example) see “Advanced Setup”to connect the Gateway.

The power LED flashes rapidly while the Gateway restarts,then

glows steadily green when fully operational.The Gateway is now

configured and users can start surfing the Web.

If an error stating the Web browser was unable to connect to the

Internet appears,check the configuration settings.Ensure all the

information required by the ISP is entered correctly.

Note: Once you have completed the initial setup of this DSL Gateway,you can

begin the process of connecting additional computers to share your high

speed,DSL Internet access.

If you want to connect to this DSL Gateway WIRELESSLY,

make sure that you have an

Actiontec Wireless Adapter

for each computer.Go to www.actiontec.com to

find the closest

Actiontec retailer.

ActionTec R1524SU Quick start guide

Brand: ActionTec

Model: R1524SU

Category: Gateways/controllers

Type: Quick start guide

This manual is also suitable for

DSL Gateway

Download PDF

report

ActionTec R1524SU Quick start guide

This manual is also suitable for

ActionTec R1524SU Quick start guide

Related papers

Other documents