Panduit FCS9N-12-10R User manual

Brand: Panduit

Model: FCS9N-12-10R

Type: User manual

The Panduit FCS9N-12-10R is an Opti-Com fiber optic splice cassette designed to organize and protect fiber optic connections. Preloaded with a 12-fiber ribbon pigtail and compatible with OS2 fiber, this cassette offers reliable splicing and fiber management. Its compact size allows for easy installation in high-density applications, making it suitable for data centers, telecommunications networks, and enterprise environments. With its durability and secure design, the FCS9N-12-10R ensures optimal performance and protection for your critical fiber optic connections.

For Technical Support: www.panduit.com/resources/install_maintain.asp

INSTALLATION INSTRUCTIONS

Page1of5

Opti-ComTM Fiber Optic Splice Cassettes

Part Number(s): See Table 1

For complete HD Flex Fiber Cassette Enclosure installation instructions, visit www.panduit.com and search FS111.

WARNING: UNMATED CONNECTORS MAY EMIT INVISIBLE LASER RADIATION. MAIN-

TAIN DUST CAPS ON UNMATED CONNECTORS. CAUTION: Fiber optic cable is sensitive to

excess pulling, bending, and crushing forces. Consult the manufacturer’s cable specifications

sheet for specific cable to use.

PART NUMBER DESCRIPTION

FCS9N-12-10R OPTI-COMTM OS2 SPLICE CASSETTE, DUPLEX LC, PRELOADED WITH 12-FIBER RIBBON PIGTAIL

FCS9N-12-10P OPTI-COMTM OS2 SPLICE CASSETTE, DUPLEX LC, PRELOADED WITH 12 PIGTAILS

FCS9N-12-LAR OPTI-COMTM OS2 SPLICE CASSETTE, DUPLEX LC/APC, PRELOADED WTH 12-FIBER RIBBON PIGTAIL

FCS9N-12-LAP OPTI-COMTM OS2 SPLICE CASSETTE, DUPLEX LC/APC, PRELOADED WITH 12 PIGTAILS

FCSZO-12-10R OPTI-COMTM OM4 SPLICE CASSETTE, DUPLEX LC, PRELOADED WITH 12-FIBER RIBBON PIGTAIL

FCSZO-12-10P OPTI-COMTM OM4 SPLICE CASSETTE, DUPLEX LC, PRELOADED WITH 12 PIGTAILS

FCS9N-12-03P OPTI-COMTM OS2 SPLICE CASSETTE, DUPLEX SC, PRELOADED WITH 12 PIGTAILS

FCS9N-12-SAP OPTI-COMTM OS2 SPLICE CASSETTE, DUPLEX SC/APC, PRELOADED WITH 12 PIGTAILS

FCSZO-12-03P OPTI-COMTM OM4 SPLICE CASSETTE, DUPLEX SC, PRELOADED WITH 12 PIGTAILS

TABLE 2: COMPONENTS

DESCRIPTION QUANTITY

OPTICOMTM SPLICE CASSETTE BASE 1

OPTI-COMTM SPLICE CASSETTE COVER 1

CASSETTE PERFORMANCE LABEL 1

#6-32 X 1/4" FLAT HEAD PHILLIPS SCREW 3

SPLICE CHIP 1

SPLICE CHIP ADHESIVE TAPE 1

PLT1.5I-M CABLE TIE 2

SPLICE PROTECTOR FOR FIBER DEPENDENT ON P/N

Table 1

For Technical Support: www.panduit.com/resources/install_maintain.asp

INSTALLATION INSTRUCTIONS

Page2of5

Screw

Cover

Figure 1

Remove 3 screws and cover.

Splice chip

shown centered

Install splice chip using splice chip adhesive tape.

For Technical Support: www.panduit.com/resources/install_maintain.asp

INSTALLATION INSTRUCTIONS

Page3of5

Showing alternative placement for splice chip

Splice chip

alternative position

Install fiber into rear of splice chip.

For Technical Support: www.panduit.com/resources/install_maintain.asp

INSTALLATION INSTRUCTIONS

Page4of5

Install cable ties over fiber cable.

Cable Ties

Cable

Bring cable in through both sides of heat shrink. Heat shrink cables together using best practices for heat

shrinking. Heat shrink may be stacked two per slot for a total of 24 cables.

INSTALLATION INSTRUCTIONS

E-mail:

[email protected]

Phone:

866-405-6654

For Instructions in Local Languages

and Technical Support:

www.panduit.com/resources/install_maintain.asp www.panduit.com

Page5of5

Attach heat shrinked cables to connectors,

Re-install cover and 3 screws.

Cover

Screw

Panduit FCS9N-12-10R User manual

Panduit FCS9N-12-10R User manual

Panduit FCS9N-12-10R User manual

Related papers

Other documents