Panduit FS201 User manual

FS201
Panduit
Brand
Panduit
Model
FS201
Type
User manual

Panduit FS201 is a 24-fiber cable-to-cable splice cassette designed for use in fiber optic networks. It features a front-access design for easy splicing and maintenance, and can accommodate a variety of cable types and sizes. The FS201 also includes a variety of features to protect your splices, including splice sleeve holders, aramid yarn strain relief, and port blanks. With its rugged construction and reliable performance, the FS201 is an ideal choice for use in demanding applications.

Panduit FS201 is a 24-fiber cable-to-cable splice cassette designed for use in fiber optic networks. It features a front-access design for easy splicing and maintenance, and can accommodate a variety of cable types and sizes. The FS201 also includes a variety of features to protect your splices, including splice sleeve holders, aramid yarn strain relief, and port blanks. With its rugged construction and reliable performance, the FS201 is an ideal choice for use in demanding applications.

Page 1 of 9
INSTALLATION INSTRUCTIONS
©Panduit Corp. 2022
For Technical Support: www.panduit.com/resources/install_maintain.asp
FlexCore™ Fusion Splice Cassette
Cable to Cable
FS201
Base
Cover
Removal
Latch
Cover
To remove the cover:
1. While pressing down on the Cover Removal Latch, slide the cover backwards until it stops
2. Then lift the cover upwards
WARNING: UNMATED CONNECTORS MAY EMIT INVISIBLE LASER RADIATION. MAINTAIN DUST
CAPS ON UNMATED CONNECTORS.
Fiber optic cable is sensitive to excessive pulling, bending, and crushing forces. Consult the manufacturer’s cable
specification sheet for specific cable to use.
TABLE 1: CASSETTE SPECIFIC COMPONENTS
PRODUCT FAMILY CASSETTE
PART NUMBER CASSETTE DESCRIPTION
24 FIBER CABLE TO CABLE
SPLICE CASSETTE FDSN-24 24F FRONT ACCESS SPLICE CASSETTE
CABLE TO CABLE
Figure 1
INSTALLATION INSTRUCTIONS FS201
©Panduit Corp. 2022
For Technical Support: www.panduit.com/resources/install_maintain.asp
Page 2 of 9
Internal Features
Screws
Aramid Yarn
Strain Relief
(2) Per Side
Routing Tabs
(8) Per Side
Discrete Fiber
Splice Sleeve Holders
(12) Per Side Double Stacked
Port Blanks
(6) Per Side
Figure 2
Ribbon Fiber
Splice Sleeve Holders
(2)2) Per Side
INSTALLATION INSTRUCTIONS FS201
©Panduit Corp. 2022
For Technical Support: www.panduit.com/resources/install_maintain.asp
Page 3 of 9
1. Strip incoming outer cable field jacket 39 inches [990mm], secure with Pan-Ty™ cable ties and aramid yarn with
screw (optional).
Option #2. Installing protection (furcation) tube(s) onto the cassette
1. Attach the furcation tube(s) onto the cassette utilizing Pan-Ty cable ties, leaving 39 inches [990mm] of exposed
fiber in preparation for splice
Option #1. Installing cable directly onto the cassette
NOTE:
Be mindful of the following during installation:
1. Maximum Input / Output cable diameter of 0.276 inches [7mm] X 4 positions
2. Maintain a minimum fiber/cable bend radii of 1 inch [25.4mm]
3. Avoid over-tightening the cable ties, crushing the fiber cable
4. (1) Pan-Ty Cable tie per side if both entry slots are being used
5. Up to (2) splice sleeves can be stacked under each splice sleeve holder
6. Furcation kits FOBKF**YM1 and FOBKF**AM1 can be purchased separately
7. Reference Appendix "C" for available Protection Tube Kits
2. Expose all fiber ends for splicing. Slide a splice sleeve onto either the pigtail or field fiber. Splice all fibers and heat
splice sleeve(s). Refer to splicer manufacturer best practice instructions.
Screws
Aramid Yarn
Strain Relief
Figure 3
2. Expose all fiber ends for splicing. Slide a splice sleeve onto either the pigtail or field fiber. Splice all fibers and heat
splice sleeve(s). Refer to splicer manufacturer best practice instructions.
Figure 4
Pan-Ty Cable Tie
(2) Per Side
Fiber Wire Input Options
Ribbon Furcation
Tube(s)
Strength
Members Locked
Beneath Screw
Option #3. Installing protection tube(s) onto the cassette
1. Attach the protection tube(s) onto the cassette utilizing Pan-Ty cable ties, leaving 39 inches [990mm] of exposed
fiber in preparation for splice
Pan-Ty Cable Tie
(2) Per Side 5.0mm Protection
Tube
Figure 5
2. Expose all fiber ends for splicing. Slide a splice sleeve onto either the pigtail or field fiber. Splice all fibers and heat
splice sleeve(s). Refer to splicer manufacturer best practice instructions.
INSTALLATION INSTRUCTIONS FS201
©Panduit Corp. 2022
For Technical Support: www.panduit.com/resources/install_maintain.asp
Page 4 of 9
Discrete Splice. Cable Input to Cable Output - Left Hand Input Wire Routing
Discrete Splice. Cable Input to Cable Output - Right Hand Input Wire Routing
Figure 6
Figure 7
INSTALLATION INSTRUCTIONS FS201
©Panduit Corp. 2022
For Technical Support: www.panduit.com/resources/install_maintain.asp
Page 8 of 9
Ribbon Splice. Cable Input to Cable Output - Left Hand Input
Ribbon Splice. Cable Input to Cable Output - Right Hand Input
Figure 9
Figure 8
INSTALLATION INSTRUCTIONS FS201
©Panduit Corp. 2022
For Technical Support: www.panduit.com/resources/install_maintain.asp
Page 6 of 9
Additional splice protectors available from Panduit:
*FOSP40-C: Single (Discrete) Fiber Splice Protection (QTY: 100 pcs)
*FOWPR40-L: Ribbon Fiber Splice Protectors (QTY: 50 pcs)
Base
Cover
Figure 10
To install the cover:
1. Place the cover on the base, aligning the side cover latches
2. Slide the cover forward until the cover latch engages with the base
INSTALLATION INSTRUCTIONS FS201
©Panduit Corp. 2022
For Technical Support: www.panduit.com/resources/install_maintain.asp
Page 7 of 9
APPENDIX "A" - FlexCoreTM Cassette / ODF System Installation Instruction Matrix
For copies of FlexCore™ Optical Distribution Frame System installation instructions, please visit
www.panduit.com and search for the specific Specification Number
INSTALLATION INSTRUCTIONS
For Instructions in Local Languages
and Technical Support:
http://www.panduit.com/resources/install_maintain.asp
E-mail:
[email protected]
Phone:
866-405-6654
www.panduit.com
FS201
©Panduit Corp. 2022
Page 8 of 9
APPENDIX "B" - Cable Ingress / Egress Options
Cable To Cable Cassettes
Ingress and egress
cable on opposite sides
Ingress and egress
cable on same side
INSTALLATION INSTRUCTIONS
For Instructions in Local Languages
and Technical Support:
http://www.panduit.com/resources/install_maintain.asp
E-mail:
[email protected]
Phone:
866-405-6654
www.panduit.com
FS201
©Panduit Corp. 2022
Page 9 of 9
APPENDIX "C" - Protection Tubing Options
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9

Panduit FS201 User manual

FS201
Panduit
Brand
Panduit
Model
FS201
Type
User manual

Panduit FS201 is a 24-fiber cable-to-cable splice cassette designed for use in fiber optic networks. It features a front-access design for easy splicing and maintenance, and can accommodate a variety of cable types and sizes. The FS201 also includes a variety of features to protect your splices, including splice sleeve holders, aramid yarn strain relief, and port blanks. With its rugged construction and reliable performance, the FS201 is an ideal choice for use in demanding applications.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents