Pelco PMCL526A User manual

Category
Supplementary music equipment
Type
User manual

This manual is also suitable for

INSTALLATION/OPERATION
C2937M-D (1/09)
500 Series Flat Panel
LCD Monitor
C2937M-D (1/09) 3
Contents
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
External Speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Mounting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Desktop Stand. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Rear Panel Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Installing Remote Control Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Remote Control Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
On-Screen Display (OSD) Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Input Source Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Video 1, Video 2, S-Video Component Mode Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
RGB/DVI Mode Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Mode Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Supported Input Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
List of Illustrations
1 Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2 Removing the Stand (PMCL523A Example) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
3 Rear Panel Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
4 Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
5 Battery Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
6 Remote Control Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
7 Input Source Display Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
8 Video 1, Video 2, S-Video, Component Mode Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
9 RGB/DVI Mode Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
List of Tables
A Mounting Hole Patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
B PIP Mode Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
C RGB/DVI Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
D Main/PIP Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
E Supported Input Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
4 C2937M-D (1/09)
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one blade wider than the
other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the points where they exit from
the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Only use with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
14. Unplug the apparatus during lightning storms or when unused for long periods of time.
15. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases shall be placed on the apparatus.
16. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
17. Installation should be done only by qualified personnel and conform to all local codes.
18. Unless this unit is specifically marked as NEMA Type 3, 3R, 3S, 4, 4X, 6, or 6P enclosure, it is designed for indoor use only and it must not
be installed where exposed to rain and moisture.
19. Only use installation methods and materials capable of supporting four times the maximum specified load.
20. Only use replacement parts recommended by Pelco.
21. Avoid touching the screen directly with your fingers as the oils from your skin may be difficult to remove from the LCD.
22. Do not apply direvect pressure on the screen.
23. Keep the monitor in a dust-free environment and away from strong electromagnetic fields.
24. Do not use attachments, such as mounts, that are not recommended by Pelco. They may be hazardous.
25. Do not place the monitor on an unstable stand, bracket, or mount. The unit may fall, causing serious damage to the unit or injury to a
person. Only use mounts recommended by Pelco.
26. A CCC-approved power cord must be used to power this equipment when used in China.
27. A still image displayed too long may cause permanent damage to the LCD panel. Watching the LCD in 4:3 format for a long time may leave
traces of borders displayed on the left, right and center of the screen caused by the difference of light emission on the screen. Using a
camera or a system may cause a similar effect to the screen. Damages caused by this effect are not covered by the warranty.
The product and/or manual may bear the following marks:
This symbol indicates that dangerous voltage constituting a risk of electric shock is
present within this unit.
This symbol indicates that there are important operating and maintenance instructions in
the literature accompanying this unit.
CAUTION:
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
C2937M-D (1/09) 5
Regulatory Notices
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RADIO AND TELEVISION INTERFERENCE
This equipment has been tested and found to comply with the limits of a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense.
Changes and Modifications not expressly approved by the manufacturer or registrant of this equipment can void your authority to operate this
equipment under Federal Communications Commission’s rules.
In order to maintain compliance with FCC regulations shielded cables must be used with this equipment. Operation with non-approved
equipment or unshielded cables is likely to result in interference to radio and television reception.
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
6 C2937M-D (1/09)
Description
The 500 Series high performance LCD monitors are designed specifically for the security industry and provide high quality display of video or
computer signals using multiple inputs. Adjustments of standard monitor display parameters are made using user-friendly, on-screen menus and
front panel controls.
For viewing multiple cameras simultaneously in high-definition quality on the LCD monitor, Pelco recommends using PMVC4 and PMVR2
multiviewers. The PMVC4 can accept up to four composite inputs while the PMVR2 can accept up to two DVI or VGA inputs. Both models can be
mixed and matched and cascaded together (daisy-chained) to put as many as 60 images of varying window sizes on the screen in clear HD
quality. This method eliminates the need of having multiple CRTs or smaller LCD monitors in racks to monitor security video. One or two LCD
monitors and a number of multiviewers can accomplish the same end with less space, less energy, and more versatility.
MODELS
SPEAKERS
All models contain two internal speakers.
PACKAGE CONTENTS
Figure 1. Parts List
PMCL523A 23-inch (583 mm) active TFT LCD monitor
PMCL526A 26-inch (660 mm) active TFT LCD monitor
PMCL532A 32-inch (800 mm) active TFT LCD monitor
PMCL537A 37-inch (940 mm) active TFT LCD monitor
PMCL542A 42-inch (1,067 mm) active TFT LCD monitor
Qty Description
1 23-, 26-, 32-, 37-, or 42-inch TFT LCD monitor with attached stand (removable)
1 US standard power cord
1 EU standard power cord
1 DVI cable
1 VGA cable with 15-pin D-sub connection
1 Remote control unit
2 AAA batteries
1 Installation/Operation manual
EU POWER CORD
1 EA.
DVI CABLE
1 EA.
US POWER CORD
1 EA.
REMOTE CONTROL
1 EA.
AAA BATTERIES
2 EA.
VGA CABLE
1 EA.
USER MANUAL
1 EA.
MONITOR
C2937M-D (1/09) 7
Installation
MOUNTING
The monitor can be placed on any flat surface (desk or table), or it can be wall mounted.
For the 23-, 26-, and 32-inch models, Pelco recommends the PMCL-CM or PMCL-CMP ceiling mount and the PMCL-WM1A or PMCL-WM2A
articulating wall mounts. The 32-inch model LCD monitor requires an adapter plate (PMCL-V200) to make these mounts compatible.
The 37- and 42-inch models use a PMCP-WM wall mount or a PMCP-WMT wall mount. The ceiling mount requires a PMCL-VA adapter
plate for the 37- and 42-inch models. Check the Pelco Web site (www.pelco.com) or contact a sales representative for available mounts as
of the publication date of this manual.
DESKTOP STAND
You can remove the desktop stand by removing the four screws that attach the stand to the back of the monitor (refer to Figure 2).
Figure 2. Removing the Stand (PMCL523A Example)
Table A. Mounting Hole Patterns
VESA
®
Compatible Non-VESA
100 X 100 200 X 200 Universal Mount
PMCL523A
PMCL526A
PMCL532A
PMCL537A
PMCL542A
SCREW
8 C2937M-D (1/09)
REAR PANEL CONNECTORS
Figure 3. Rear Panel Connectors
NOTES:
RGB is also referred to as VGA or PC connector in the video security market. We use the term RGB in this manual, in the menu, and on the
remote control. The RGB connector is a D-sub 15-pin female plug. RGB is analog but provides a clear, sharp picture. It can carry either
standard or HDTV formats.
Component is not commonly used in the video security industry. It uses three RCA cables: red, green, and blue for better color separation
and a superior picture over composite. Component is an analog format that can carry standard and high-definition video and is most
commonly found on DVD players. To receive audio, you must connect the DVD output to the audio input.
Digital Video Interface (DVI) provides the best picture. It is used in Pelco products such as Endura
®
, PMVR2, PMVC4, PL outputs, DVD
players, and satellite boxes. Since the signal received and monitor are both digital, no conversion occurs to degrade the signal. Pelco
recommends using multiviewers (PMVR2, PMVC4) with the 500 Series monitors using DVI. The 500 Series uses a DVI-D interface, so DVI-I
cables will not work. DVI can carry either standard or HDTV formats.
ì
DVI IN: Connection to digital video signals from a computer or any DVI output.
î
RGB IN (VGA): Connection to RGB (VGA) output of a computer or any VGA output.
ï
COMPONENT: Autodetecting component video inputs (Y/LPb/Pr or Y/RCb/Cr) for connecting to the component output jacks of a DVD
player.
ñ
PC A-OUT and PC A-IN (loop through): Stereo mini jack input to be used in conjunction with the RGB input from a DVR. Audio loops
through the stereo mini jack output.
ó
A-OUT2, A-IN2, A-OUT1, A-IN1 (loop through): Mono RCA audio inputs.
r
S-VHS OUT, S-VHS IN (loop through): Connection of S-Video signals from external sources such as VCRs or DVD players. Video loops
through the 4-pin DIN S-Video output.
s
V-IN2, V-OUT2 (loop through): Input connections from time-lapse VCRs. Video loops through the BNC video output.
t
V-IN1, V-OUT1 (loop through): Input connections from time-lapse VCRs. Video loops through the BNC video output.
u
AC IN: Power receptacle, which can be connected to a 100 to 240 VAC, 50/60 Hz source.
(External Speaker Jacks): Stereo mini jack inputs for optional external speakers.
(Mounting Holes)
FRONT
COMPONENTRGB INDVI IN
PC A-OUT
AC IN
REAR
LR
Y Pb/CbPr/Cr
PC A-IN
A-OUT2
A-IN2
A-OUT1
A-IN1
S-VHS OUT
S-VHS IN
V-OUT1V-IN1V-OUT2V-IN2
AC IN
FRONT PC A-OUT
REAR PC A-IN
A-OUT2
A-IN2
A-OUT1
A-IN1
S-VHS OUT
S-VHS IN
V-OUT1V-IN1V-OUT2V-IN2
RGB IN
DVI IN
COMPONENT
Y
L
Pb/Cb
R
Pr/Cr
C2937M-D (1/09) 9
Operation
FRONT PANEL CONTROLS
Figure 4. Front Panel Controls
ì
MENU: Displays the main on-screen menu.
î
SOURCE: Selects the input source and confirms your choice.
ï
!
and ": Navigates through the on-screen menu.
ñ
#VOL$: Increases or decreases the volume. Also selects or adjusts items on the on-screen menu.
ó
(Power Button): Turns on/off the monitor.
r
(Remote Control Signal Receiver): Receives remote control signal. Aim the remote control at this spot on the monitor.
s
(Power Indicator): Indicates power status. Red indicates the power is off; green indicates the power is on.
MENU
SOURCE
VOL
MENU SOURCE VOL
10 C2937M-D (1/09)
INSTALLING REMOTE CONTROL BATTERIES
Figure 5. Battery Installation
Refer to Figure 5 for the following procedure.
1. Open and remove the battery cover on the back of the remote control.
2. Install two AAA size batteries (supplied). Match the positive (+) and negative (–) signs on the batteries to the signs on the battery
compartment.
3. Close the battery cover. Make sure the lock snaps closed.
WARNINGS:
Dispose of batteries in a designated disposal area. Do not throw batteries into a fire.
Do not mix battery types.
Remove dead batteries immediately to prevent battery acid from leaking into the battery compartment.
Remove the batteries if you do not intend to use the remote control for a long period of time.
C2937M-D (1/09) 11
REMOTE CONTROL FUNCTIONS
Figure 6. Remote Control Functions
ì
POWER: Turns on or off power to the monitor.
î
MUTE: Silences the sound. To return the sound, press MUTE again, VOL +,
or VOL -.
ï
(Input Source): Displays all the available input sources. Press the button to
select the desired input source.
ñ
(PIP): Controls the PIP (picture-in-picture) as follows:
PIP ON/OFF: Activates/deactivates PIP/PBP mode.
P.SIZE: Selects the size of the subpicture.
P. S WA P : Swaps the main and subpicture.
P. I N P U T: Selects an input source for the subpicture.
P.LOCATION: Selects a location for the subpicture.
SOUND SEL: Selects the sound of the main or subpicture.
ó
(Key Lock): Prevents unauthorized operation of the equipment by locking
the buttons on the front panel. Only the buttons on the remote control can be
used.
NOTE: If the remote control is lost or damaged, pressing and holding the
SOURCE button on the front panel for five seconds will unlock the keys.
r
MENU/EXIT: Displays/exits the on-screen menu.
s
#/VOL- and $/VOL+, ", !: Controls the cursor in the on-screen
menu, and also adjusts the volume up or down.
t
ENTER: Confirms (store or enter) your choice in the on-screen menu.
u
STILL: Freezes the current picture.
SCAN: Changes the scan mode of the screen (UNDER, 16:9, OVER, 4:3).
AUTO: Selects auto adjustment of the screen in RGB mode.
BLUE ONLY: Turns off the red and green colors on the screen to allow color
adjustment using professional calibration tools.
COLOR TEMP: Adjusts the color temperature (Kelvin) of the screen Select
NORMAL, COOL, or USER.
4:3/16:9: Swaps the picture between 4:3 mode and 16:9 mode.
ENTER
AUTO
BLUE ONLY
COLOR TEMP. 4:3/16:9
MUTE
VIDEO1
POWER
VIDEO 2
RGB DVI COMPONENT
PIP ON/OFF P. SIZE P. SWAP
P. INPUT P. LOCATION SOUND. SEL
MENU/EXIT KEY LOCK
SCAN STILL
S-VIDEO
/VOL
/VOL +
12 C2937M-D (1/09)
ON-SCREEN DISPLAY (OSD) FUNCTION
INPUT SOURCE DISPLAY
Figure 7. Input Source Display Menu
The input source name is displayed in the upper-right corner. You can change the input source there or by pressing one of the input source keys
on the remote control.
MENUS
The menus are the same for the PMCL523A, PMCL526A, PMCL532A, PMCL537A, and PMCL542A. Since different options are available for
different input types, some options may be unavailable.
To use the menus:
1. Press the MENU button to access the Main menu.
2. Use the
"and !buttons to highlight a selection.
3. Press the ENTER button to select an item.
4. Use the
#/VOL- and $/VOL+ buttons to adjust the setting of a selected item.
VIDEO 1
VIDEO 1/2
S-VIDEO
RGB
DVI
COMPONENT
C2937M-D (1/09) 13
VIDEO 1, VIDEO 2, S-VIDEO COMPONENT MODE MENU
Figure 8. Video 1, Video 2, S-Video, Component Mode Menu
MAIN MENU
Brightness Menu
0 100
Color Menu
0 100
Sharpness Menu
0 15
Tint Menu
0 100
3D Noise Reduction Menu
OFF
NR ON
PIP LOCATION
PIP SIZE
PIP SWAP
Setup Menu
Language Menu
Panel Buttons Menu
UNLOCK
LOCK
SETUP
PIP Menu
Scan Mode Menu
OSD Setting Menu
SETUP
OSD Setting Menu
OSD H.POSITION
OSD V.POSITION
OSD DISPLAY TIME
Color Temp. Menu
Default Setting Menu
RESTORE
NORMAL
COOL
USER
INFORMATION
R-GAIN
B-GAIN
B-GAIN
R-OFFS
ET
G-OFFSET
B-OFFSET
RESET
User Menu
PIP Swap Menu
SWAP
PIP Input Menu
PIP Size Menu
LARGE
SMALL
NORMAL
PIP Location Menu
T/L
T/R
B/R
B/L
PIP Options Menu
PIP ON
PBP ON
OSD H Position
0 100
OSD V Position
0 100
OSD Dwelling Time
OFF
B-Gain Menu
0 100
R-Gain Menu
0 100
G-Offset Menu
0 100
G-Gain Menu
0 100
R-Offset Menu
0 100
R-Offset Menu
0 100
Reset Setting
RESTORE
Input Menu
0 100
Contrast Menu
PIP OPTION
PIP INPUT
PIP OFF
5 30
VIDEO 1
VIDEO 2
S-VIDEO
RGB
DVI
COMPONENT
INPUT
CONTRAST
BRIGHTNESS
COLOR
SHARPNESS
TINT
3D NOISE REDUCTION
LANGUAGE
PANEL BUTTONS
PIP
SCAN MODE
OSD SETTING
COLOR TEMPERATURE
DEFAULT SETTING
INFORMATION
ENGLISH
ITALIAN
FRENCH
SPANISH
GERMAN
UNDER
16:9
0VER
4:3
VIDEO 1
VIDEO 2
S-VIDEO
COMPONENT
14 C2937M-D (1/09)
Video 1, Video 2, S-Video, Component Mode Menu Field Definitions
Input: Select VIDEO 1, VIDEO 2, S-VIDEO, RGB, DVI, or COMPONENT.
Contrast: Adjusts the black level of the video screen image (0 to 100).
Brightness: Adjusts the white level of the video screen image (0 to 100).
Color: Adjusts the color saturation of the video signal (0 to 100).
Sharpness: Adjusts the picture softer or sharper (0 to 15).
Tint: Adjusts the range of color: green to red (0 to 100).
3D Noise Reduction: Reduces the background noise of the video signal (NR ON or OFF).
Language: Select ENGLISH, ITALIAN, FRENCH, SPANISH, or GERMAN for the OSD display.
Panel Buttons: Select UNLOCK or LOCK, and then press Enter to lock/unlock the buttons on the front panel. Authorized users can release the
key lock feature by pressing and holding the SOURCE button for five seconds.
PIP: Select SETUP for the picture-in-picture, and then select one of the following options:
PIP Option: Select PIP OFF, PIP ON, or PBP ON.
PIP Input: Select VIDEO 1, VIDEO 2, S-VIDEO, or COMPONENT.
PIP Location: Select the PIP position as T/L (top left), T/R (top right), B/R (bottom right), or B/L (bottom left).
PIP Size: Select the PIP size as LARGE, SMALL, or NORMAL.
PIP Swap: Select SWAP to interchange Main with PIP by pressing the ENTER button twice.
Only limited inputs can be selected while in PIP mode, based on the main video source in use (refer to Table B):
Scan Mode: Select UNDER, 16:9, OVER, or 4:3 .This is in the Video menu.
OSD Setting: Select SETUP for the on-screen display. Then select one of the following:
OSD H.Position: Adjusts the OSD horizontal position (0 to 100).
OSD V.Position: Adjusts the OSD vertical position (0 to 100).
OSD Display Time: Select OFF or a range of 5-30 seconds.
Color Temperature: Select NORMAL, COOL, or USER. If you select USER, then select from the following calibrations:
R-Gain: Adjusts the gain for red (0 to 100).
G-Gain: Adjusts the gain for green (0 to 100).
B-Gain: Adjusts the gain for blue (0 to 100).
R-Offset: Adjusts the offset (or cut) for red (0 to100).
G-Offset: Adjusts the offset (or cut) for green (0 to 100).
B-Offset: Adjusts the offset (or cut) for blue (0 to 100).
Reset: Select RESTORE to return to the original color temperature settings.
Default Setting: Select RESTORE to return to the default settings.
Information: Select INFORMATION to access Pelco headquarters information.
Table B. PIP Mode Inputs
Main Video Source Accessible PIP Inputs
Video 1 S-Video, Component, Video 2
Video 2 S-Video, Component, Video 1
S-Video Component, Video 1, Video 2
RGB Component, Video 1, Video 2, S-Video
DVI S-Video, Component, Video 1, Video 2
Component Video 1, Video 2, S-Video
C2937M-D (1/09) 15
RGB/DVI MODE MENU
Figure 9. RGB/DVI Mode Menu
INPUT
CONTRAST
BRIGHTNESS
H. POSITION
V. POSITION
FREQUENCY
VIDEO 1
VIDEO 2
S-VIDEO
RGB
DVI
COMPONENT
COMPONENT
PHASE
AUTO POSITION
LANGUAGE
PANEL BUTTONS
PIP
ASPECT RATIO
OSD SETTING
COLOR TEMPERATURE
DEFAULT SETTING
INFORMATION
MAIN MENU
0 100
0 100
0 100
0 100
0 100
Phase Menu
PIP INPUT
PIP LOCATION
PIP SIZE
PIP SWAP
Setup Menu
Auto Position Menu
DISABLE
1024 X 768
1280 X 768
1360 X 768
1366 X 768
Panel Buttons Menu
UNLOCK
LOCK
SETUP
PIP Menu
Aspect Ratio
OSD Setting Menu
SETUP
OSD Setting Menu
OSD H.POSITION
OSD V.POSITION
OSD DISPLAY TIME
Color Temp. Menu
Default Setting Menu
RESTORE
INFORMATION
NORMAL
COOL
USER
R-GAIN
B-GAIN
B-GAIN
R-OFFSET
G-OFFSET
B-OFFSET
RESET
User Menu
PIP Swap Menu
SWAP
PIP Input Menu
PIP Size Menu
LARGE
SMALL
NORMAL
PIP Location Menu
T/L
T/R
B/R
B/L
PIP Options Menu
OSD H Position
0 100
OSD V Position
0 100
OSD Dwelling Time
B-Gain Menu
0 100
R-Gain Menu
0 100
G-Offset Menu
0 100
G-Gain Menu
0 100
R-Offset Menu
0 100
R-Offset Menu
0 100
Reset Setting
RESTORE
Contrast Menu
Brightness Menu
H. Position Menu
V. Position Menu
Frequency Menu
0 100
PIP OPTION
OFF
5 30
PIP ON
PBP ON
PIP OFF
UNDER
16:9
0VER
4:3
VIDEO 1
VIDEO 2
S-VIDEO
16 C2937M-D (1/09)
RGB/DVI Mode Menu Field Definitions
NOTE: The DVI menu has a more limited selection. It consists of the following options: Input, Contrast, Brightness, Language, Panel Buttons, PIP,
Aspect Ratio, OSD Setting, Color Temp., Default Setting, and Information.
Input: Select RGB or DVI.
Contrast: Adjusts the black level of the video screen image (0 to 100).
Brightness: Adjusts the white level of the video screen image (0 to 100).
H-Position: (RGB only; not in DVI mode.) Adjusts the horizontal position (0 to 100).
V-Position: (RGB only; not in DVI mode.) Adjusts the vertical position (0 to 100).
Frequency: (RGB only; not in DVI mode.) Adjusts the horizontal size of the screen image (0 to 100).
Phase: (RGB only; not in DVI mode.) Adjusts image distortion appearing as horizontal noise on the screen (0 to 100).
Auto Position: (May be dimmed.) Select DISABLE, 1024 x 768, 1280 x 768, 1360 x 768, or 1366 x 768.
This menu is an override function.
The menu is enabled only when the input signal is in one of these resolutions. Other resolutions are not displayed, and are set by
autodetection.
If the screen is not displayed correctly, change the resolution selection.
The resolution remains as you set it until changed again.
If the display is distorted or shifted at a resolution of 1366 x 768 or 1360 x 768, adjust the resolution here by manually selecting 1366 x 768
or 1360 x 768.
Language: The choices are English, Italian, French, Spanish, and German.
Panel Buttons: Select UNLOCK or LOCK, and then press Enter to lock/unlock the buttons on the front panel. Authorized users can release the
key lock feature by pressing and holding the SOURCE button for five seconds.
PIP: Select Setup for the picture-in-picture, and then select one of the following:
PIP Option: Select PIP OFF, PIP ON, or PBP ON.
PIP Input: Select VIDEO 1, VIDEO 2, S-VIDEO, or COMPONENT.
PIP Location: Select the PIP position as T/L (top left), T/R (top right), B/R (bottom right), or B/L (bottom left).
PIP Size: Select the PIP size as LARGE, SMALL, or NORMAL.
PIP Swap: Select SWAP to interchange Main with PIP. (This is in the DVI mode.)
Aspect Ratio: Select UNDER, 16:9, OVER, or 4:3. (This is in DVI mode.)
OSD Setting: Select Setup for the on-screen display. Then select one of the following:
OSD H.Position: Adjusts the OSD horizontal position (0 to 100).
OSD V.Position: Adjusts the OSD vertical position (0 to 100).
OSD Display Time: Select OFF or a range of 5 to 30 seconds.
Color Temperature: Select NORMAL, COOL, or USER. If you select USER, then select from the following calibrations:
R-Gain: Adjusts the gain for red (0 to 100).
G-Gain: Adjusts the gain for green (0 to 100).
B-Gain: Adjusts the gain for blue (0 to 100).
R-Offset: Adjusts the offset (or cut) for red (0 to 100).
G-Offset: Adjusts the offset (or cut) for green (0 to 100).
B-Offset: Adjusts the offset (or cut) for blue (0 to 100).
Reset:
Select RESTORE to return to the original color temperature settings.
Default Setting: Select RESTORE to return to the default settings.
Information: Select INFORMATION to access Pelco headquarters information.
C2937M-D (1/09) 17
Mode Tables
Table C. RGB/DVI Mode
Mode Resolution Vertical Frequency (Hz)
VGA
720 x 400 70
640 x 480 50/60/72/75/85
SVGA 800 x 600 56/60/72/75/85
XGA 1024 x 768 60/70/75/80/85
SXGA 1280 x 1024 60
WXGA 1360 x 768 60
WXGA 1366 x 768 60
SDTV 480P 720 x 480 60
SDTV 576P 720 x 576 50
HDTV 720P 1280 x 720 60
HDTV 1080I 1920 x 1080 30
NOTE: The maximum resolution is 1366 x 768 at 60 Hz.
Table D. Main/PIP Mode
MAIN SOURCE
Video1 Video2 S-Video RGB DVI Component
SUB SOURCE
Video1 ••
(Swap)*
(Swap)*
Video2 ••
(Swap)*
(Swap)*
S-Video ••
(Swap)*
(Swap)*
RGB
DVI
Component ••
(Swap)*
(Swap)*
*Swap changes the subpicture to a main picture and vice versa.
18 C2937M-D (1/09)
Maintenance
If the quality of the picture is poor and cannot be improved by making adjustments on the front control panel, inspect all system connections and
cable runs.
CLEANING
Gently wipe your screen with a clean camel hair brush or a soft, clean, lint-free cloth.
Gently apply pressure to the screen surface to clean the display.
Do not spray any liquid directly on the screen or the LCD monitor casing.
Chemical cleaners can damage the screen or the LCD monitor casing.
Troubleshooting
Intermittent Loss of Video in PIP/PBP and Main Video
Possible cause: In PAL, when using PIP or PBP, cycling through cameras (with one or more cameras out of operation) causes the monitor to
auto adjust and locate the signal.
Remedy: Check your input devices. If there is a problem with a camera from another input device such as no power signal or bad video, then
correct or disconnect the camera or device.
WARNING: To reduce the risk of electrical shock, do not remove the cover or back of the monitor. No user-serviceable parts are inside.
Refer servicing to qualified personnel, or contact Pelco Customer Serviceat 1-800-289-9100 (USA and Canada) or +1-559-292-1981
(International) for assistance. Refer to Product Warranty and Return Information located on the inside back cover of this document.
C2937M-D (1/09) 19
Supported Input Modes
Table E. Supported Input Modes
Mode Resolution H Freq. (kHz) V Freq. (Hz)
0 720 x 400 31.469 70.000
1 640 x 480 31.460 50.000
2 640 x 480 31.500 60.000
3 640 x 480 37.700 72.000
4 640 x 480 37.500 75.000
5 640 x 480 43.300 85.000
6 800 x 600 35.100 56.000
7 800 x 600 37.900 60.000
8 800 x 600 48.100 72.000
9 800 x 600 46.900 75.000
10 800 x 600 53.700 85.000
11 1024 x 768 48.400 60.000
12 1024 x 768 56.500 70.000
13 1024 x 768 60.000 75.000
14 1024 x 768 64.000 80.000
15 1024 x 768 68.300 85.000
16 1280 x 1024 64.000 60.000
17 1360 x 768* 47.700 60.000
18 1366 x 768* 50.000 60.000
*If the display is distorted or shifted at a resolution of 1366 x 768 or
1360 x 768, you should adjust the resolution in Auto Position on the
OSD menu: MENU > AUTO POSITION OVERRIDE >1366 X 768 or
1360 x 768.
20 C2937M-D (1/09)
Specifications
MODELS
PMCL523A 23-inch (583 mm) LCD monitor
PMCL526A 26-inch (660 mm) LCD monitor
PMCL532A 32-inch (800 mm) LCD monitor
PMCL537A 37-inch (940 mm) LCD monitor
PMCL542A 42-inch (1,067 mm) LCD monitor
GENERAL
Native Resolution 1366 x 768 WXGA
Optimum Resolution 1360 x 768/1366 x 768 at 60 Hz depending on graphic card used
Panel Aspect Ratio 16:9
Viewing Area
PMCL523A 508 x 286 mm
PMCL526A 576 x 324 mm
PMCL532A 698 x 392 mm
PMCL537A 820 x 461 mm
PMCL542A 930 x 523 mm
Pixel Pitch
PMCL523A 0.372 x 0.372 mm
PMCL526A 0.422 x 0.422 mm
PMCL532A 0.511 x 0.511 mm
PMCL537A 0.600 x 0.600 mm
PMCL542A 0.681 x 0.681 mm
Video Formats 480i, 480p, 576i, 576p, 720p, 1080i
Brightness
PMCL526A 450 cd/m
2
PMCL523A, PMCL532A,
PMCL537A, PMCL542A 500 cd/m
2
Contrast Ratio
PMCL523A 700:1
PMCL526A 900:1
PMCL532A, PMCL537A,
PMCL542A 1100:1
Backlight Type
PMCL523A 6 CCFL
PMCL526A 12 EEFL
PMCL532A, PMCL537A 16 EEFL
PMCL542A 18 EEFL
Panel Life 50,000 hours
Viewing Angle (H/V)
PMCL523A 160°/160°
PMCL526A, PMCL532A,
PMCL537A, PMCL542A 178°/178°
Display Colors 16.7 million
PIP (Picture-In-Picture) Selectable, sizable, swappable, moveable
PBP (Picture-By-Picture) Swappable
Response Time
PMCL523A,PMCL526A,
PMCL532A 8 ms
PMCL537A, PMCL542A 5 ms
Speakers 2 internal
Front Panel Controls Power, source/enter, menu/exit, up, down, volume minus, volume plus
Indicators LED (power on/off)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24

Pelco PMCL526A User manual

Category
Supplementary music equipment
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI